[PATCH v2 00/15] PHY: Add support for multilink configurations in Cadence Sierra PHY driver

[Swapnil Jakhade]

Cadence Sierra PHY is a multiprotocol PHY supporting different multilink
PHY configurations. This patch series extends functionality of Sierra PHY
driver by adding features like support for multilink multiprotocol
configurations, derived reference clock etc.

The changes have been validated on TI J721E platform.

Version History:

v2:
   - Added a new patch 3/15 to rename the SSC macros for dt-bindings
     to use generic names. These macros are not yet used in any DTS file.

Swapnil Jakhade (15):
  phy: cadence: Sierra: Use of_device_get_match_data() to get driver
    data
  phy: cadence: Sierra: Prepare driver to add support for multilink
    configurations
  dt-bindings: phy: cadence-torrent: Rename SSC macros to use generic
    names
  dt-bindings: phy: cadence-sierra: Add binding to specify SSC mode
  phy: cadence: Sierra: Add support to get SSC type from device tree
  phy: cadence: Sierra: Rename some regmap variables to be in sync with
    Sierra documentation
  phy: cadence: Sierra: Add PHY PCS common register configurations
  phy: cadence: Sierra: Check cmn_ready assertion during PHY power on
  phy: cadence: Sierra: Check PIPE mode PHY status to be ready for
    operation
  phy: cadence: Sierra: Update single link PCIe register configuration
  phy: cadence: Sierra: Fix to get correct parent for mux clocks
  phy: cadence: Sierra: Add support for PHY multilink configurations
  phy: cadence: Sierra: Add PCIe + QSGMII PHY multilink configuration
  dt-bindings: phy: cadence-sierra: Add clock ID for derived reference
    clock
  phy: cadence: Sierra: Add support for derived reference clock output

 .../bindings/phy/phy-cadence-sierra.yaml      |    9 +
 .../bindings/phy/phy-cadence-torrent.yaml     |    4 +-
 drivers/phy/cadence/phy-cadence-sierra.c      | 1299 +++++++++++++++--
 include/dt-bindings/phy/phy-cadence.h         |    9 +-
 4 files changed, 1226 insertions(+), 95 deletions(-)

-- 
2.26.1