[PATCH 20/29] pcmcia: remove suspend-related comment from yenta_socket.c

[Dominik Brodowski]

While pci_set_power_state() is called by the PCI core
unconditionally on all PCI devices, it is not called on _any_
PCI bridge device. Therefore, it is not surprising calling
pci_set_power_state() on CardBus devices causes trouble.

CC: dbrownell at users.sourceforge.net
CC: gregkh at suse.de
Signed-off-by: Dominik Brodowski <linux at dominikbrodowski.net>
---
 drivers/pcmcia/yenta_socket.c |    7 -------
 1 files changed, 0 insertions(+), 7 deletions(-)

diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index 83ace27..424e576 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -1303,13 +1303,6 @@ static int yenta_dev_suspend_noirq(struct device *dev)
 	pci_read_config_dword(pdev, 17*4, &socket->saved_state[1]);
 	pci_disable_device(pdev);
 
-	/*
-	 * Some laptops (IBM T22) do not like us putting the Cardbus
-	 * bridge into D3.  At a guess, some other laptop will
-	 * probably require this, so leave it commented out for now.
-	 */
-	/* pci_set_power_state(dev, 3); */
-
 	return 0;
 }
 
-- 
1.6.3.3