Changing the IO window of the cardbus bridge

[Richard Smith]

>
> Strange indeed. IDE guys, any ideas? Also, what's the output of lspcmcia -vv
> (you need pcmciautils-013 for this).

root at KanotixBox:/home/josh/src/pcmciautils-013# lspcmcia -vv
Socket 0 Bridge:        [yenta_cardbus]         (bus ID: 0000:02:05.0)
        Configuration:  state: on       ready: yes
                        Voltage: 3.3V Vcc: 3.3V Vpp: 0.0V
                        Available IRQs: 3, 4, 5, 7, 10, 11
                        Available iomem:        0x00000100 - 0x000003af
                                                0x000003e0 - 0x000004cf
                                                0x000004d8 - 0x000004ff
                                                0x00000820 - 0x000008ff
                                                0x00000a00 - 0x00000aff
                                                0x00000c00 - 0x00000cf7
                                                0x00001000 - 0x0000100f
                                                0x00004000 - 0x00004fff
                        Available ioports:      0x000c0000 - 0x000fffff
                                                0xd0250000 - 0xd02fffff
Socket 0 Device 0:      [ide-cs]                (bus ID: 0.0)
        Configuration:  state: on
        Product Name:   SanDisk SDP 5/3 0.6
        Identification: manf_id: 0x0045 card_id: 0x0401
                        function: 4 (fixed disk)
                        prod_id(1): "SanDisk" (0x7a954bd9)
                        prod_id(2): "SDP" (0x91844b1c)
                        prod_id(3): "5/3 0.6" (0xaac4295b)
                        prod_id(4): --- (---)


--
Richard A. Smith