Problem with yenta_socket (unable to map card memory) - PROGRESS

[David Hinds]

On Sat, Jul 10, 2004 at 11:37:23AM -0700, Jeff Morrow wrote:
> 
> The wireless card is a Linksys WPC11 ver.3.  I know it can work with 
> Linux because I have a Knoppix box running with the exact same card, and 
> it's working fine.  (That box uses an old ISA-to-PCMCIA converter, 
> though.  Not sure if that matters.)
> 
> When I start up with the Linksys card, I get high beep, low beep, and 
> the following messages:
> 
> cs: IO port probe 0x0100-0x04ff: excluding 0x290-0x297 0x4d0-0x4d7
> cs: IO port probe 0x0800-0x08ff: clean.
> cs: IO port probe 0x0c00-0x0cff: clean.
> cs: IO port probe 0x0a00-0x0aff: clean.
> cs: IO port probe 0xa000-0xbfff: clean.
> cs: memory probe 0xe4000000-0xe4ffffff: excluding 0xe4000000-0xe40fffff

The exact same card works on the other box?

The same card, or another card that is the same model?

Try this specific card in the other box.

-- Dave