[BUG] unable to apply power.

[Jean Tourrilhes]

	Hi,

	After a few successful insertion/removal, my CardBus socket
developped this problem :
-------------------------------
PCMCIA: socket cf339030: unable to apply power.
-------------------------------
	And after that, the network Cardbus driver loads but doesn't
get any interrupts.

	I wonder how I shoulddebug that. By the way, this is 2.6.3
with :
-----------------------------------------
00:13.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 80)
        Flags: bus master, medium devsel, latency 168, IRQ 17
        Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=00, secondary=03, subordinate=06, sec-latency=176
        Memory window 0: 10400000-107ff000 (prefetchable)
        Memory window 1: 10800000-10bff000
        I/O window 0: 00004000-000040ff
        I/O window 1: 00004400-000044ff
        16-bit legacy interface ports at 0001
-----------------------------------------

	Thanks !

	Jean