[Linux-parport] [PATCH 12/32] pata_parport-bpck6: use parport access functions instead of port I/O
Ondrej Zary
linux at zary.sk
Tue Mar 7 14:46:07 PST 2023
Use parport access functions instead of inb/outb/inw/outw/inl/outl.
Signed-off-by: Ondrej Zary <linux at zary.sk>
---
drivers/ata/pata_parport/bpck6.c | 1 -
drivers/ata/pata_parport/ppc6lnx.c | 212 +++++++++--------------------
2 files changed, 68 insertions(+), 145 deletions(-)
diff --git a/drivers/ata/pata_parport/bpck6.c b/drivers/ata/pata_parport/bpck6.c
index dc0f71cc305e..39ac6e1a0aee 100644
--- a/drivers/ata/pata_parport/bpck6.c
+++ b/drivers/ata/pata_parport/bpck6.c
@@ -15,7 +15,6 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/types.h>
-#include <asm/io.h>
#include <linux/parport.h>
#include "pata_parport.h"
#include "ppc6lnx.c"
diff --git a/drivers/ata/pata_parport/ppc6lnx.c b/drivers/ata/pata_parport/ppc6lnx.c
index 09480a7fcaee..89c40d6ab036 100644
--- a/drivers/ata/pata_parport/ppc6lnx.c
+++ b/drivers/ata/pata_parport/ppc6lnx.c
@@ -17,7 +17,6 @@
#define port_int 16
-#define port_dir 0x20
#define ECR_EPP 0x80
#define ECR_BI 0x20
@@ -106,65 +105,60 @@ static int ppc6_select(struct pi_adapter *pi)
{
u8 i, j, k;
- i = inb(pi->port + 1);
+ pi->saved_r0 = parport_read_data(pi->pardev->port);
- if (i & 1)
- outb(i, pi->port + 1);
-
- pi->saved_r0 = inb(pi->port);
-
- pi->saved_r2 = inb(pi->port + 2) & 0x5F; // readback ctrl
+ pi->saved_r2 = parport_read_control(pi->pardev->port) & 0x5F; // readback ctrl
CUR_CTRL = pi->saved_r2;
CUR_CTRL |= PARPORT_CONTROL_SELECT;
- outb(CUR_CTRL, pi->port + 2);
+ parport_write_control(pi->pardev->port, CUR_CTRL);
if (pi->saved_r0 == 'b')
- outb('x', pi->port);
+ parport_write_data(pi->pardev->port, 'x');
- outb('b', pi->port);
- outb('p', pi->port);
- outb(pi->unit, pi->port);
- outb(~pi->unit, pi->port);
+ parport_write_data(pi->pardev->port, 'b');
+ parport_write_data(pi->pardev->port, 'p');
+ parport_write_data(pi->pardev->port, pi->unit);
+ parport_write_data(pi->pardev->port, ~pi->unit);
CUR_CTRL &= ~PARPORT_CONTROL_SELECT;
- outb(CUR_CTRL, pi->port + 2);
+ parport_write_control(pi->pardev->port, CUR_CTRL);
CUR_CTRL = (CUR_CTRL & port_int) | PARPORT_CONTROL_INIT;
- outb(CUR_CTRL, pi->port + 2);
+ parport_write_control(pi->pardev->port, CUR_CTRL);
i = mode_map[pi->mode] & 0x0C;
if (i == 0)
i = (mode_map[pi->mode] & 2) | 1;
- outb(i, pi->port);
+ parport_write_data(pi->pardev->port, i);
CUR_CTRL |= PARPORT_CONTROL_SELECT;
- outb(CUR_CTRL, pi->port + 2);
+ parport_write_control(pi->pardev->port, CUR_CTRL);
// DELAY
CUR_CTRL |= PARPORT_CONTROL_AUTOFD;
- outb(CUR_CTRL, pi->port + 2);
+ parport_write_control(pi->pardev->port, CUR_CTRL);
j = ((i & 0x08) << 4) | ((i & 0x07) << 3);
- k = inb(pi->port + 1) & 0xB8;
+ k = parport_read_status(pi->pardev->port) & 0xB8;
if (j == k)
{
CUR_CTRL &= ~PARPORT_CONTROL_AUTOFD;
- outb(CUR_CTRL, pi->port + 2);
+ parport_write_control(pi->pardev->port, CUR_CTRL);
- k = (inb(pi->port + 1) & 0xB8) ^ 0xB8;
+ k = (parport_read_status(pi->pardev->port) & 0xB8) ^ 0xB8;
if (j == k)
{
@@ -173,15 +167,15 @@ static int ppc6_select(struct pi_adapter *pi)
else // PPC/ECP
CUR_CTRL &= ~PARPORT_CONTROL_SELECT;
- outb(CUR_CTRL, pi->port + 2);
+ parport_write_control(pi->pardev->port, CUR_CTRL);
return(1);
}
}
- outb(pi->saved_r2, pi->port + 2);
+ parport_write_control(pi->pardev->port, pi->saved_r2);
- outb(pi->saved_r0, pi->port);
+ parport_write_data(pi->pardev->port, pi->saved_r0);
return(0); // FAIL
}
@@ -195,13 +189,13 @@ static void ppc6_deselect(struct pi_adapter *pi)
else // PPC/ECP
CUR_CTRL |= PARPORT_CONTROL_SELECT;
- outb(CUR_CTRL, pi->port + 2);
+ parport_write_control(pi->pardev->port, CUR_CTRL);
- outb(pi->saved_r0, pi->port);
+ parport_write_data(pi->pardev->port, pi->saved_r0);
- outb((pi->saved_r2 | PARPORT_CONTROL_SELECT), pi->port + 2);
+ parport_write_control(pi->pardev->port, (pi->saved_r2 | PARPORT_CONTROL_SELECT));
- outb(pi->saved_r2, pi->port + 2);
+ parport_write_control(pi->pardev->port, pi->saved_r2);
}
//***************************************************************************
@@ -215,11 +209,11 @@ static void ppc6_send_cmd(struct pi_adapter *pi, u8 cmd)
case PPCMODE_BI_SW :
case PPCMODE_BI_FW :
{
- outb(cmd, pi->port);
+ parport_write_data(pi->pardev->port, cmd);
CUR_CTRL ^= PARPORT_CONTROL_AUTOFD;
- outb(CUR_CTRL, pi->port + 2);
+ parport_write_control(pi->pardev->port, CUR_CTRL);
break;
}
@@ -228,7 +222,7 @@ static void ppc6_send_cmd(struct pi_adapter *pi, u8 cmd)
case PPCMODE_EPP_WORD :
case PPCMODE_EPP_DWORD :
{
- outb(cmd, pi->port + 3);
+ pi->pardev->port->ops->epp_write_addr(pi->pardev->port, &cmd, 1, 0);
break;
}
@@ -246,11 +240,11 @@ static void ppc6_wr_data_byte(struct pi_adapter *pi, u8 data)
case PPCMODE_BI_SW :
case PPCMODE_BI_FW :
{
- outb(data, pi->port);
+ parport_write_data(pi->pardev->port, data);
CUR_CTRL ^= PARPORT_CONTROL_INIT;
- outb(CUR_CTRL, pi->port + 2);
+ parport_write_control(pi->pardev->port, CUR_CTRL);
break;
}
@@ -259,7 +253,7 @@ static void ppc6_wr_data_byte(struct pi_adapter *pi, u8 data)
case PPCMODE_EPP_WORD :
case PPCMODE_EPP_DWORD :
{
- outb(data, pi->port + 4);
+ pi->pardev->port->ops->epp_write_data(pi->pardev->port, &data, 1, 0);
break;
}
@@ -279,21 +273,21 @@ static u8 ppc6_rd_data_byte(struct pi_adapter *pi)
{
CUR_CTRL = (CUR_CTRL & ~PARPORT_CONTROL_STROBE) ^ PARPORT_CONTROL_INIT;
- outb(CUR_CTRL, pi->port + 2);
+ parport_write_control(pi->pardev->port, CUR_CTRL);
// DELAY
- data = inb(pi->port + 1);
+ data = parport_read_status(pi->pardev->port);
data = ((data & 0x80) >> 1) | ((data & 0x38) >> 3);
CUR_CTRL |= PARPORT_CONTROL_STROBE;
- outb(CUR_CTRL, pi->port + 2);
+ parport_write_control(pi->pardev->port, CUR_CTRL);
// DELAY
- data |= inb(pi->port + 1) & 0xB8;
+ data |= parport_read_status(pi->pardev->port) & 0xB8;
break;
}
@@ -301,23 +295,19 @@ static u8 ppc6_rd_data_byte(struct pi_adapter *pi)
case PPCMODE_BI_SW :
case PPCMODE_BI_FW :
{
- CUR_CTRL |= port_dir;
-
- outb(CUR_CTRL, pi->port + 2);
+ parport_data_reverse(pi->pardev->port);
CUR_CTRL = (CUR_CTRL | PARPORT_CONTROL_STROBE) ^ PARPORT_CONTROL_INIT;
- outb(CUR_CTRL, pi->port + 2);
+ parport_write_control(pi->pardev->port, CUR_CTRL);
- data = inb(pi->port);
+ data = parport_read_data(pi->pardev->port);
CUR_CTRL &= ~PARPORT_CONTROL_STROBE;
- outb(CUR_CTRL, pi->port + 2);
-
- CUR_CTRL &= ~port_dir;
+ parport_write_control(pi->pardev->port, CUR_CTRL);
- outb(CUR_CTRL, pi->port + 2);
+ parport_data_forward(pi->pardev->port);
break;
}
@@ -326,11 +316,7 @@ static u8 ppc6_rd_data_byte(struct pi_adapter *pi)
case PPCMODE_EPP_WORD :
case PPCMODE_EPP_DWORD :
{
- outb((CUR_CTRL | port_dir), pi->port + 2);
-
- data = inb(pi->port + 4);
-
- outb(CUR_CTRL, pi->port + 2);
+ pi->pardev->port->ops->epp_read_data(pi->pardev->port, &data, 1, 0);
break;
}
@@ -373,21 +359,21 @@ static void ppc6_rd_data_blk(struct pi_adapter *pi, u8 *data, long count)
CUR_CTRL = (CUR_CTRL & ~PARPORT_CONTROL_STROBE)
^ PARPORT_CONTROL_INIT;
- outb(CUR_CTRL, pi->port + 2);
+ parport_write_control(pi->pardev->port, CUR_CTRL);
// DELAY
- d = inb(pi->port + 1);
+ d = parport_read_status(pi->pardev->port);
d = ((d & 0x80) >> 1) | ((d & 0x38) >> 3);
CUR_CTRL |= PARPORT_CONTROL_STROBE;
- outb(CUR_CTRL, pi->port + 2);
+ parport_write_control(pi->pardev->port, CUR_CTRL);
// DELAY
- d |= inb(pi->port + 1) & 0xB8;
+ d |= parport_read_status(pi->pardev->port) & 0xB8;
*data++ = d;
count--;
@@ -399,9 +385,7 @@ static void ppc6_rd_data_blk(struct pi_adapter *pi, u8 *data, long count)
case PPCMODE_BI_SW :
case PPCMODE_BI_FW :
{
- CUR_CTRL |= port_dir;
-
- outb(CUR_CTRL, pi->port + 2);
+ parport_data_reverse(pi->pardev->port);
CUR_CTRL |= PARPORT_CONTROL_STROBE;
@@ -409,84 +393,47 @@ static void ppc6_rd_data_blk(struct pi_adapter *pi, u8 *data, long count)
{
CUR_CTRL ^= PARPORT_CONTROL_INIT;
- outb(CUR_CTRL, pi->port + 2);
+ parport_write_control(pi->pardev->port, CUR_CTRL);
- *data++ = inb(pi->port);
+ *data++ = parport_read_data(pi->pardev->port);
count--;
}
CUR_CTRL &= ~PARPORT_CONTROL_STROBE;
- outb(CUR_CTRL, pi->port + 2);
+ parport_write_control(pi->pardev->port, CUR_CTRL);
- CUR_CTRL &= ~port_dir;
-
- outb(CUR_CTRL, pi->port + 2);
+ parport_data_forward(pi->pardev->port);
break;
}
case PPCMODE_EPP_BYTE :
{
- outb((CUR_CTRL | port_dir), pi->port + 2);
-
// DELAY
- while(count)
- {
- *data++ = inb(pi->port + 4);
- count--;
- }
-
- outb(CUR_CTRL, pi->port + 2);
+ pi->pardev->port->ops->epp_read_data(pi->pardev->port,
+ data, count, PARPORT_EPP_FAST_8);
break;
}
case PPCMODE_EPP_WORD :
{
- outb((CUR_CTRL | port_dir), pi->port + 2);
-
// DELAY
- while(count > 1)
- {
- *((u16 *)data) = inw(pi->port + 4);
- data += 2;
- count -= 2;
- }
-
- while(count)
- {
- *data++ = inb(pi->port + 4);
- count--;
- }
-
- outb(CUR_CTRL, pi->port + 2);
+ pi->pardev->port->ops->epp_read_data(pi->pardev->port,
+ data, count, PARPORT_EPP_FAST_16);
break;
}
case PPCMODE_EPP_DWORD :
{
- outb((CUR_CTRL | port_dir), pi->port + 2);
-
// DELAY
- while(count > 3)
- {
- *((u32 *)data) = inl(pi->port + 4);
- data += 4;
- count -= 4;
- }
-
- while(count)
- {
- *data++ = inb(pi->port + 4);
- count--;
- }
-
- outb(CUR_CTRL, pi->port + 2);
+ pi->pardev->port->ops->epp_read_data(pi->pardev->port,
+ data, count, PARPORT_EPP_FAST_32);
break;
}
@@ -503,7 +450,7 @@ static void ppc6_wait_for_fifo(struct pi_adapter *pi)
if (PPC_FLAGS & fifo_wait)
{
for(i=0; i<20; i++)
- inb(pi->port + 1);
+ parport_read_status(pi->pardev->port);
}
}
@@ -518,11 +465,11 @@ static void ppc6_wr_data_blk(struct pi_adapter *pi, u8 *data, long count)
{
while(count--)
{
- outb(*data++, pi->port);
+ parport_write_data(pi->pardev->port, *data++);
CUR_CTRL ^= PARPORT_CONTROL_INIT;
- outb(CUR_CTRL, pi->port + 2);
+ parport_write_control(pi->pardev->port, CUR_CTRL);
}
break;
@@ -537,11 +484,11 @@ static void ppc6_wr_data_blk(struct pi_adapter *pi, u8 *data, long count)
CUR_CTRL |= PARPORT_CONTROL_STROBE;
- outb(CUR_CTRL, pi->port + 2);
+ parport_write_control(pi->pardev->port, CUR_CTRL);
last = *data;
- outb(last, pi->port);
+ parport_write_data(pi->pardev->port, last);
while(count)
{
@@ -552,11 +499,11 @@ static void ppc6_wr_data_blk(struct pi_adapter *pi, u8 *data, long count)
{
CUR_CTRL ^= PARPORT_CONTROL_INIT;
- outb(CUR_CTRL, pi->port + 2);
+ parport_write_control(pi->pardev->port, CUR_CTRL);
}
else
{
- outb(this, pi->port);
+ parport_write_data(pi->pardev->port, this);
last = this;
}
@@ -564,7 +511,7 @@ static void ppc6_wr_data_blk(struct pi_adapter *pi, u8 *data, long count)
CUR_CTRL &= ~PARPORT_CONTROL_STROBE;
- outb(CUR_CTRL, pi->port + 2);
+ parport_write_control(pi->pardev->port, CUR_CTRL);
ppc6_send_cmd(pi, CMD_PREFIX_RESET | PREFIX_FASTWR);
@@ -573,11 +520,8 @@ static void ppc6_wr_data_blk(struct pi_adapter *pi, u8 *data, long count)
case PPCMODE_EPP_BYTE :
{
- while(count)
- {
- outb(*data++, pi->port + 4);
- count--;
- }
+ pi->pardev->port->ops->epp_write_data(pi->pardev->port,
+ data, count, PARPORT_EPP_FAST_8);
ppc6_wait_for_fifo(pi);
@@ -586,18 +530,8 @@ static void ppc6_wr_data_blk(struct pi_adapter *pi, u8 *data, long count)
case PPCMODE_EPP_WORD :
{
- while(count > 1)
- {
- outw(*((u16 *)data), pi->port + 4);
- data += 2;
- count -= 2;
- }
-
- while(count)
- {
- outb(*data++, pi->port + 4);
- count--;
- }
+ pi->pardev->port->ops->epp_write_data(pi->pardev->port,
+ data, count, PARPORT_EPP_FAST_16);
ppc6_wait_for_fifo(pi);
@@ -606,18 +540,8 @@ static void ppc6_wr_data_blk(struct pi_adapter *pi, u8 *data, long count)
case PPCMODE_EPP_DWORD :
{
- while(count > 3)
- {
- outl(*((u32 *)data), pi->port + 4);
- data += 4;
- count -= 4;
- }
-
- while(count)
- {
- outb(*data++, pi->port + 4);
- count--;
- }
+ pi->pardev->port->ops->epp_write_data(pi->pardev->port,
+ data, count, PARPORT_EPP_FAST_32);
ppc6_wait_for_fifo(pi);
--
Ondrej Zary
More information about the Linux-parport
mailing list