[Linux-parport] [PATCH 07/18] pata_parport: remove device from struct pi_adapter
Ondrej Zary
linux at zary.sk
Mon Mar 6 09:27:41 PST 2023
device is never set in pata_parport, remove it.
Reviewed-by: Sergey Shtylyov <s.shtylyov at omp.ru>
Signed-off-by: Ondrej Zary <linux at zary.sk>
---
drivers/ata/pata_parport/aten.c | 3 +--
drivers/ata/pata_parport/bpck.c | 12 ++++++------
drivers/ata/pata_parport/bpck6.c | 10 ++++------
drivers/ata/pata_parport/comm.c | 3 +--
drivers/ata/pata_parport/dstr.c | 3 +--
drivers/ata/pata_parport/epat.c | 8 ++++----
drivers/ata/pata_parport/epia.c | 7 +++----
drivers/ata/pata_parport/fit2.c | 5 +++--
drivers/ata/pata_parport/fit3.c | 4 ++--
drivers/ata/pata_parport/friq.c | 6 +++---
drivers/ata/pata_parport/frpw.c | 12 +++++-------
drivers/ata/pata_parport/kbic.c | 3 +--
drivers/ata/pata_parport/ktti.c | 5 +++--
drivers/ata/pata_parport/on20.c | 3 +--
drivers/ata/pata_parport/on26.c | 3 +--
include/linux/pata_parport.h | 1 -
16 files changed, 39 insertions(+), 49 deletions(-)
diff --git a/drivers/ata/pata_parport/aten.c b/drivers/ata/pata_parport/aten.c
index 9e6098f90162..bf83e4188c23 100644
--- a/drivers/ata/pata_parport/aten.c
+++ b/drivers/ata/pata_parport/aten.c
@@ -124,8 +124,7 @@ static void aten_log_adapter( PIA *pi, char * scratch, int verbose )
{ char *mode_string[2] = {"4-bit","8-bit"};
- printk("%s: aten %s, ATEN EH-100 at 0x%x, ",
- pi->device,ATEN_VERSION,pi->port);
+ printk("aten %s, ATEN EH-100 at 0x%x, ", ATEN_VERSION, pi->port);
printk("mode %d (%s), delay %d\n",pi->mode,
mode_string[pi->mode],pi->delay);
diff --git a/drivers/ata/pata_parport/bpck.c b/drivers/ata/pata_parport/bpck.c
index 96386a10c22f..c33ca1cb72ac 100644
--- a/drivers/ata/pata_parport/bpck.c
+++ b/drivers/ata/pata_parport/bpck.c
@@ -335,8 +335,8 @@ static int bpck_test_proto( PIA *pi, char * scratch, int verbose )
}
if (verbose) {
- printk("%s: bpck: 0x%x unit %d mode %d: ",
- pi->device,pi->port,pi->unit,pi->mode);
+ printk("bpck: 0x%x unit %d mode %d: ",
+ pi->port, pi->unit, pi->mode);
for (i=0;i<TEST_LEN;i++) printk("%3d",buf[i]);
printk("\n");
}
@@ -432,13 +432,13 @@ static void bpck_log_adapter( PIA *pi, char * scratch, int verbose )
for(i=0;i<128;i++)
if ((scratch[i] < ' ') || (scratch[i] > '~'))
scratch[i] = '.';
- printk("%s: bpck EEPROM: %64.64s\n",pi->device,scratch);
- printk("%s: %64.64s\n",pi->device,&scratch[64]);
+ printk("bpck EEPROM: %64.64s\n", scratch);
+ printk(" %64.64s\n", &scratch[64]);
}
#endif
- printk("%s: bpck %s, backpack %8.8s unit %d",
- pi->device,BPCK_VERSION,&scratch[110],pi->unit);
+ printk("bpck %s, backpack %8.8s unit %d",
+ BPCK_VERSION, &scratch[110], pi->unit);
printk(" at 0x%x, mode %d (%s), delay %d\n",pi->port,
pi->mode,mode_string[pi->mode],pi->delay);
}
diff --git a/drivers/ata/pata_parport/bpck6.c b/drivers/ata/pata_parport/bpck6.c
index 3c358e66db25..13bfd60655dd 100644
--- a/drivers/ata/pata_parport/bpck6.c
+++ b/drivers/ata/pata_parport/bpck6.c
@@ -200,11 +200,9 @@ static void bpck6_log_adapter( PIA *pi, char * scratch, int verbose )
char *mode_string[5]=
{"4-bit","8-bit","EPP-8","EPP-16","EPP-32"};
- printk("%s: BACKPACK Protocol Driver V"BACKPACK_VERSION"\n",pi->device);
- printk("%s: Copyright 2001 by Micro Solutions, Inc., DeKalb IL.\n",pi->device);
- printk("%s: BACKPACK %s, Micro Solutions BACKPACK Drive at 0x%x\n",
- pi->device,BACKPACK_VERSION,pi->port);
- printk("%s: Unit: %d Mode:%d (%s) Delay %d\n",pi->device,
+ printk("BACKPACK %s, Micro Solutions BACKPACK Drive at 0x%x\n",
+ BACKPACK_VERSION, pi->port);
+ printk("Unit: %d Mode:%d (%s) Delay %d\n",
pi->unit,pi->mode,mode_string[pi->mode],pi->delay);
}
@@ -217,7 +215,7 @@ static int bpck6_init_proto(PIA *pi)
return 0;
}
- printk(KERN_ERR "%s: ERROR COULDN'T ALLOCATE MEMORY\n", pi->device);
+ printk(KERN_ERR "ERROR COULDN'T ALLOCATE MEMORY\n");
return -1;
}
diff --git a/drivers/ata/pata_parport/comm.c b/drivers/ata/pata_parport/comm.c
index 47f0fbccc3aa..908f6c44548b 100644
--- a/drivers/ata/pata_parport/comm.c
+++ b/drivers/ata/pata_parport/comm.c
@@ -183,8 +183,7 @@ static void comm_log_adapter( PIA *pi, char * scratch, int verbose )
{ char *mode_string[5] = {"4-bit","8-bit","EPP-8","EPP-16","EPP-32"};
- printk("%s: comm %s, DataStor Commuter at 0x%x, ",
- pi->device,COMM_VERSION,pi->port);
+ printk("comm %s, DataStor Commuter at 0x%x, ", COMM_VERSION, pi->port);
printk("mode %d (%s), delay %d\n",pi->mode,
mode_string[pi->mode],pi->delay);
diff --git a/drivers/ata/pata_parport/dstr.c b/drivers/ata/pata_parport/dstr.c
index e733a2512e17..3732e9b79429 100644
--- a/drivers/ata/pata_parport/dstr.c
+++ b/drivers/ata/pata_parport/dstr.c
@@ -195,8 +195,7 @@ static void dstr_log_adapter( PIA *pi, char * scratch, int verbose )
{ char *mode_string[5] = {"4-bit","8-bit","EPP-8",
"EPP-16","EPP-32"};
- printk("%s: dstr %s, DataStor EP2000 at 0x%x, ",
- pi->device,DSTR_VERSION,pi->port);
+ printk("dstr %s, DataStor EP2000 at 0x%x, ", DSTR_VERSION, pi->port);
printk("mode %d (%s), delay %d\n",pi->mode,
mode_string[pi->mode],pi->delay);
diff --git a/drivers/ata/pata_parport/epat.c b/drivers/ata/pata_parport/epat.c
index 7583d07083a8..59720daa9c19 100644
--- a/drivers/ata/pata_parport/epat.c
+++ b/drivers/ata/pata_parport/epat.c
@@ -280,8 +280,8 @@ static int epat_test_proto( PIA *pi, char * scratch, int verbose )
epat_disconnect(pi);
if (verbose) {
- printk("%s: epat: port 0x%x, mode %d, ccr %x, test=(%d,%d,%d)\n",
- pi->device,pi->port,pi->mode,cc,e[0],e[1],f);
+ printk("epat: port 0x%x, mode %d, ccr %x, test=(%d,%d,%d)\n",
+ pi->port, pi->mode, cc, e[0], e[1], f);
}
return (e[0] && e[1]) || f;
@@ -298,8 +298,8 @@ static void epat_log_adapter( PIA *pi, char * scratch, int verbose )
ver = RR(0xb);
epat_disconnect(pi);
- printk("%s: epat %s, Shuttle EPAT chip %x at 0x%x, ",
- pi->device,EPAT_VERSION,ver,pi->port);
+ printk("epat %s, Shuttle EPAT chip %x at 0x%x, ",
+ EPAT_VERSION, ver, pi->port);
printk("mode %d (%s), delay %d\n",pi->mode,
mode_string[pi->mode],pi->delay);
diff --git a/drivers/ata/pata_parport/epia.c b/drivers/ata/pata_parport/epia.c
index 2bcb18a6845a..610269083441 100644
--- a/drivers/ata/pata_parport/epia.c
+++ b/drivers/ata/pata_parport/epia.c
@@ -263,8 +263,8 @@ static int epia_test_proto( PIA *pi, char * scratch, int verbose )
epia_disconnect(pi);
if (verbose) {
- printk("%s: epia: port 0x%x, mode %d, test=(%d,%d,%d)\n",
- pi->device,pi->port,pi->mode,e[0],e[1],f);
+ printk("epia: port 0x%x, mode %d, test=(%d,%d,%d)\n",
+ pi->port, pi->mode, e[0], e[1], f);
}
return (e[0] && e[1]) || f;
@@ -277,8 +277,7 @@ static void epia_log_adapter( PIA *pi, char * scratch, int verbose )
{ char *mode_string[6] = {"4-bit","5/3","8-bit",
"EPP-8","EPP-16","EPP-32"};
- printk("%s: epia %s, Shuttle EPIA at 0x%x, ",
- pi->device,EPIA_VERSION,pi->port);
+ printk("epia %s, Shuttle EPIA at 0x%x, ", EPIA_VERSION, pi->port);
printk("mode %d (%s), delay %d\n",pi->mode,
mode_string[pi->mode],pi->delay);
diff --git a/drivers/ata/pata_parport/fit2.c b/drivers/ata/pata_parport/fit2.c
index c63f0cd2ea52..28de8e4e41c3 100644
--- a/drivers/ata/pata_parport/fit2.c
+++ b/drivers/ata/pata_parport/fit2.c
@@ -115,8 +115,9 @@ static void fit2_disconnect ( PIA *pi )
static void fit2_log_adapter( PIA *pi, char * scratch, int verbose )
-{ printk("%s: fit2 %s, FIT 2000 adapter at 0x%x, delay %d\n",
- pi->device,FIT2_VERSION,pi->port,pi->delay);
+{
+ printk("fit2 %s, FIT 2000 adapter at 0x%x, delay %d\n",
+ FIT2_VERSION, pi->port, pi->delay);
}
diff --git a/drivers/ata/pata_parport/fit3.c b/drivers/ata/pata_parport/fit3.c
index adbef142c88f..0366f3123508 100644
--- a/drivers/ata/pata_parport/fit3.c
+++ b/drivers/ata/pata_parport/fit3.c
@@ -173,9 +173,9 @@ static void fit3_log_adapter( PIA *pi, char * scratch, int verbose )
{ char *mode_string[3] = {"4-bit","8-bit","EPP"};
- printk("%s: fit3 %s, FIT 3000 adapter at 0x%x, "
+ printk("fit3 %s, FIT 3000 adapter at 0x%x, "
"mode %d (%s), delay %d\n",
- pi->device,FIT3_VERSION,pi->port,
+ FIT3_VERSION, pi->port,
pi->mode,mode_string[pi->mode],pi->delay);
}
diff --git a/drivers/ata/pata_parport/friq.c b/drivers/ata/pata_parport/friq.c
index e740fe933e20..9306a2c78d90 100644
--- a/drivers/ata/pata_parport/friq.c
+++ b/drivers/ata/pata_parport/friq.c
@@ -208,8 +208,8 @@ static int friq_test_proto( PIA *pi, char * scratch, int verbose )
friq_disconnect(pi);
if (verbose) {
- printk("%s: friq: port 0x%x, mode %d, test=(%d,%d,%d)\n",
- pi->device,pi->port,pi->mode,e[0],e[1],r);
+ printk("friq: port 0x%x, mode %d, test=(%d,%d,%d)\n",
+ pi->port, pi->mode, e[0], e[1], r);
}
return (r || (e[0] && e[1]));
@@ -221,7 +221,7 @@ static void friq_log_adapter( PIA *pi, char * scratch, int verbose )
{ char *mode_string[6] = {"4-bit","8-bit",
"EPP-8","EPP-16","EPP-32"};
- printk("%s: friq %s, Freecom IQ ASIC-2 adapter at 0x%x, ", pi->device,
+ printk("friq %s, Freecom IQ ASIC-2 adapter at 0x%x, ",
FRIQ_VERSION,pi->port);
printk("mode %d (%s), delay %d\n",pi->mode,
mode_string[pi->mode],pi->delay);
diff --git a/drivers/ata/pata_parport/frpw.c b/drivers/ata/pata_parport/frpw.c
index 8c8681812bed..63f2165fec63 100644
--- a/drivers/ata/pata_parport/frpw.c
+++ b/drivers/ata/pata_parport/frpw.c
@@ -231,15 +231,13 @@ static int frpw_test_proto( PIA *pi, char * scratch, int verbose )
if (((pi->private%2) == 0) && (pi->mode > 2)) {
if (verbose)
- printk("%s: frpw: Xilinx does not support mode %d\n",
- pi->device, pi->mode);
+ printk("frpw: Xilinx does not support mode %d\n", pi->mode);
return 1;
}
if (((pi->private%2) == 1) && (pi->mode == 2)) {
if (verbose)
- printk("%s: frpw: ASIC does not support mode 2\n",
- pi->device);
+ printk("frpw: ASIC does not support mode 2\n");
return 1;
}
@@ -261,8 +259,8 @@ static int frpw_test_proto( PIA *pi, char * scratch, int verbose )
frpw_disconnect(pi);
if (verbose) {
- printk("%s: frpw: port 0x%x, chip %ld, mode %d, test=(%d,%d,%d)\n",
- pi->device,pi->port,(pi->private%2),pi->mode,e[0],e[1],r);
+ printk("frpw: port 0x%x, chip %ld, mode %d, test=(%d,%d,%d)\n",
+ pi->port, (pi->private%2), pi->mode, e[0], e[1], r);
}
return (r || (e[0] && e[1]));
@@ -274,7 +272,7 @@ static void frpw_log_adapter( PIA *pi, char * scratch, int verbose )
{ char *mode_string[6] = {"4-bit","8-bit","EPP",
"EPP-8","EPP-16","EPP-32"};
- printk("%s: frpw %s, Freecom (%s) adapter at 0x%x, ", pi->device,
+ printk("frpw %s, Freecom (%s) adapter at 0x%x, ",
FRPW_VERSION,((pi->private%2) == 0)?"Xilinx":"ASIC",pi->port);
printk("mode %d (%s), delay %d\n",pi->mode,
mode_string[pi->mode],pi->delay);
diff --git a/drivers/ata/pata_parport/kbic.c b/drivers/ata/pata_parport/kbic.c
index b120597043cc..9a99b9e35d41 100644
--- a/drivers/ata/pata_parport/kbic.c
+++ b/drivers/ata/pata_parport/kbic.c
@@ -235,8 +235,7 @@ static void kbic_log_adapter( PIA *pi, char * scratch,
{ char *mode_string[6] = {"4-bit","5/3","8-bit",
"EPP-8","EPP_16","EPP-32"};
- printk("%s: kbic %s, KingByte %s at 0x%x, ",
- pi->device,KBIC_VERSION,chip,pi->port);
+ printk("kbic %s, KingByte %s at 0x%x, ", KBIC_VERSION, chip, pi->port);
printk("mode %d (%s), delay %d\n",pi->mode,
mode_string[pi->mode],pi->delay);
diff --git a/drivers/ata/pata_parport/ktti.c b/drivers/ata/pata_parport/ktti.c
index 15463cd18968..d87eb3c139bc 100644
--- a/drivers/ata/pata_parport/ktti.c
+++ b/drivers/ata/pata_parport/ktti.c
@@ -92,8 +92,9 @@ static void ktti_disconnect ( PIA *pi )
static void ktti_log_adapter( PIA *pi, char * scratch, int verbose )
-{ printk("%s: ktti %s, KT adapter at 0x%x, delay %d\n",
- pi->device,KTTI_VERSION,pi->port,pi->delay);
+{
+ printk("ktti %s, KT adapter at 0x%x, delay %d\n",
+ KTTI_VERSION, pi->port, pi->delay);
}
diff --git a/drivers/ata/pata_parport/on20.c b/drivers/ata/pata_parport/on20.c
index f2a601e77842..0a1e60e20656 100644
--- a/drivers/ata/pata_parport/on20.c
+++ b/drivers/ata/pata_parport/on20.c
@@ -115,8 +115,7 @@ static void on20_log_adapter( PIA *pi, char * scratch, int verbose )
{ char *mode_string[2] = {"4-bit","8-bit"};
- printk("%s: on20 %s, OnSpec 90c20 at 0x%x, ",
- pi->device,ON20_VERSION,pi->port);
+ printk("on20 %s, OnSpec 90c20 at 0x%x, ", ON20_VERSION, pi->port);
printk("mode %d (%s), delay %d\n",pi->mode,
mode_string[pi->mode],pi->delay);
diff --git a/drivers/ata/pata_parport/on26.c b/drivers/ata/pata_parport/on26.c
index 66f04015f19a..ceb5018caeec 100644
--- a/drivers/ata/pata_parport/on26.c
+++ b/drivers/ata/pata_parport/on26.c
@@ -280,8 +280,7 @@ static void on26_log_adapter( PIA *pi, char * scratch, int verbose )
{ char *mode_string[5] = {"4-bit","8-bit","EPP-8",
"EPP-16","EPP-32"};
- printk("%s: on26 %s, OnSpec 90c26 at 0x%x, ",
- pi->device,ON26_VERSION,pi->port);
+ printk("on26 %s, OnSpec 90c26 at 0x%x, ", ON26_VERSION, pi->port);
printk("mode %d (%s), delay %d\n",pi->mode,
mode_string[pi->mode],pi->delay);
diff --git a/include/linux/pata_parport.h b/include/linux/pata_parport.h
index 3fc6b002c7c8..dcab769aa639 100644
--- a/include/linux/pata_parport.h
+++ b/include/linux/pata_parport.h
@@ -17,7 +17,6 @@ struct pi_adapter {
int port; /* base address of parallel port */
int mode; /* transfer mode in use */
int delay; /* adapter delay setting */
- char *device; /* dummy for paride protocol modules */
int unit; /* unit number for chained adapters */
int saved_r0; /* saved port state */
int saved_r2; /* saved port state */
--
Ondrej Zary
More information about the Linux-parport
mailing list