[Linux-parport] Linux v2.6.21-rc3

[Michal Piotrowski]

Linus Torvalds napisał(a):
> We've finally hopefully started to put a dent in the regressions, 
> especially the suspend/resume problems introduced since 2.6.20.
> 
> So 2.6.21-rc3 is out there now, and there's some hope that it will work 
> more widely than -rc1 and -rc2 did. Please do give it a good testing, and 
> update Adrian and the mailing list (and me) about any regressions 
> (hopefully many more of the "it's fixed now" than other kinds, but all 
> regressions are interesting).
> 
> The appended shortlog gives a reasonable overview. In general we're 
> definitely calming down, and most of the changes are fairly small and 
> obvious fixes. 
> 
> Let's keep the fixes to a minimum, especially since I'm planning on biting 
> peoples heads off if I get any more pull requests for things that aren't 
> real and obvious fixes. 
> 
> 		Linus

BTW. Does anyone care about parport console?
console=lp0 hangs since at least 2.6.18

Calling initcall 0xc0438939: pty_init+0x0/0x231()
Calling initcall 0xc0439235: lp_init_module+0x0/0x238()
lp: driver loaded but no devices found
Calling initcall 0xc043947f: mod_init+0x0/0x286()
intel_rng: FWH not detected
Calling initcall 0xc0439aa9: serial8250_init+0x0/0x114()
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
PM: Adding info for platform:serial8250
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PM: Adding info for No Bus:ttyS0
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
PM: Adding info for No Bus:ttyS1
PM: Adding info for No Bus:ttyS2
PM: Adding info for No Bus:ttyS3
Calling initcall 0xc0439c6c: serial8250_pnp_init+0x0/0xf()
PM: Removing info for No Bus:ttyS0
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PM: Adding info for No Bus:ttyS0
PM: Removing info for No Bus:ttyS1
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
PM: Adding info for No Bus:ttyS1
Calling initcall 0xc0439c7b: serial8250_pci_init+0x0/0x16()
Calling initcall 0xc043a16d: parport_default_proc_register+0x0/0x16()
Calling initcall 0xc043a250: parport_pc_init+0x0/0x196()
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).

http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.21-rc3/git-config

Regards,
Michal

-- 
Michal K. K. Piotrowski
LTG - Linux Testers Group (PL)
(http://www.stardust.webpages.pl/ltg/)
LTG - Linux Testers Group (EN)
(http://www.stardust.webpages.pl/linux_testers_group_en/)