[Linux-parport] HP 7100e

[Jim Rawling]

Hi all.
I'm trying to run a 7100e on a Kanotix installation - debian kernel 2.6.14
dmesg follows:

pg: Unknown parameter `-verbose'
pg: pg version 1.02, major 97
pga: Sharing parport0 at 0x378
pga: epat 1.02, Shuttle EPAT chip c6 at 0x378, mode 5 (EPP-32), delay 1
pga: HP CD-Writer+ 7100, slave
pg: pg version 1.02, major 97
pga: 0x378 is parport0
pga: epat: port 0x378, mode 0, ccr 0, test=(255,0,0)
pga: epat: port 0x378, mode 1, ccr 40, test=(255,224,448)
pga: epat: port 0x378, mode 2, ccr 0, test=(255,0,0)
pga: epat: port 0x378, mode 3, ccr 0, test=(255,0,0)
pga: epat: port 0x378, mode 4, ccr 0, test=(255,0,0)
pga: epat: port 0x378, mode 5, ccr 0, test=(255,0,0)
pga: Sharing parport0 at 0x378
pga: epat 1.02, Shuttle EPAT chip c6 at 0x378, mode 5 (EPP-32), delay 1
pga: Reset (2501) signature =  ff ff ff ff ff (incorrect)
pga: Reset (375) signature =   1  1  1 14 eb
pga: HP CD-Writer+ 7100, slave


where I'm stuck is finding the correct device (in /dev? ) to mount. My
flailing follows:

root at box:/mnt/cdr# pga: epat: port 0x378, mode 0, ccr 0, test=(255,0,0)
bash: syntax error near unexpected token `('
root at box:/mnt/cdr# pga: epat: port 0x378, mode 1, ccr 40, test=(255,224,448)
bash: syntax error near unexpected token `('
root at box:/mnt/cdr# pga: epat: port 0x378, mode 2, ccr 0, test=(255,0,0)
bash: syntax error near unexpected token `('
root at box:/mnt/cdr# pga: epat: port 0x378, mode 3, ccr 0, test=(255,0,0)
bash: syntax error near unexpected token `('
root at box:/mnt/cdr# pga: epat: port 0x378, mode 4, ccr 0, test=(255,0,0)
bash: syntax error near unexpected token `('
root at box:/mnt/cdr# pga: epat: port 0x378, mode 5, ccr 0, test=(255,0,0)
bash: syntax error near unexpected token `('
root at box:/mnt/cdr# pga: Sharing parport0 at 0x378
bash: pga:: command not found
root at box:/mnt/cdr# pga: epat 1.02, Shuttle EPAT chip c6 at 0x378, mode 5
(EPP-32), delay 1
bash: syntax error near unexpected token `('
root at box:/mnt/cdr# pga: Reset (2501) signature =  ff ff ff ff ff (incorrect)
bash: syntax error near unexpected token `('
root at box:/mnt/cdr# pga: Reset (375) signature =   1  1  1 14 eb
bash: syntax error near unexpected token `('
root at box:/mnt/cdr# pga: HP CD-Writer+ 7100, slave
bash: pga:: command not found


Would someone graciously put me out of my misery and suggest which M that I
should RTF?
--
Jim Rawling
Eclectic Electric
cell: (250) 727 1548
home: (250) 388 5910
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.infradead.org/pipermail/linux-parport/attachments/20061015/e16d504c/attachment.html