[Linux-parport] parport_serial and NetMos 9835

[Russell Shaw]

Russell Shaw wrote:
> Michael Reinelt wrote:
> 
>> Hi Russel,
>>
>>> I patched 2.6.10 and compiled in the parport and serial port options 
>>> in menuconfig.
>>>
>>> It still won't work:(
>>
>>
>> Too bad. My micro-patch does not change any behaviour of the card ord 
>> the driver, it just disables the entries for NM9835 in parport_pc.c, 
>> so that the PCI device is not handled by parport_pc, but by 
>> parport_serial.
>>
>> You did load the parport_serial module? What does syslog say when 
>> loading this module?
> 
> 
> I compiled it into the kernel.
> 
>>> lspci -vv -s 0:b.0 shows:
>>
>>
>> [...]
>>
>>> Interrupt: pin A routed to IRQ 19
>>
>>
>> [...]
>>
>>> Is that IRQ 19 real or bogus?
>>
>>
>>
>> Here I get IRQ9. I don't know what IRQ19 is.
>>
>> bye, Michael
> 
> 
> I'll fix this crappy driver with some kernel hacking.

Hi,
I took a closer look at dmesg and found it was recognized with ports at /dev/ttyS4-5 instead of 
/dev/ttyS2-3 as i assumed. So now it works;)