Linux error `[DMA Write NO_PASID] Request device [3c:00.0] fault addr 0x0 [fault reason 0x05] PTE Write access is not set`
Paul Menzel
pmenzel at molgen.mpg.de
Sat Feb 7 11:10:09 PST 2026
Dear Linux folks,
On the Intel Kaby Lake laptop Dell XPS 13 9360, Linux logs the error below:
[17959.189315] ACPI: EC: event unblocked
[17959.197876] DMAR: DRHD: handling fault status reg 2
[17959.197882] DMAR: [DMA Write NO_PASID] Request device [3c:00.0]
fault addr 0x0 [fault reason 0x05] PTE Write access is not set
[17959.198366] DMAR: DRHD: handling fault status reg 2
[17959.198369] DMAR: [DMA Write NO_PASID] Request device [3c:00.0]
fault addr 0x0 [fault reason 0x05] PTE Write access is not set
[17959.198923] DMAR: DRHD: handling fault status reg 2
[17959.201477] nvme nvme0: 4/0/0 default/read/poll queues
3c:00.0 is the NVMe controller/device.
$ lspci -nn -s 3c:00.0
3c:00.0 Non-Volatile memory controller [0108]: SK hynix PC300 NVMe
Solid State Drive 512GB [1c5c:1284]
This seems to happen only *sometimes* when resuming from ACPI S3.
To my knowledge, this is *not* a new problem. Please find the log
messages attached. (Ignore the other DMAR error for now.)
Kind regards,
Paul
-------------- next part --------------
[ 0.000000] Linux version 6.19-amd64 (debian-kernel at lists.debian.org) (x86_64-linux-gnu-gcc-15 (Debian 15.2.0-12) 15.2.0, GNU ld (GNU Binutils for Debian) 2.45.90.20260201) #1 SMP PREEMPT_DYNAMIC Debian 6.19~rc8-1~exp1 (2026-02-02)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.19-amd64 root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer mem_sleep_default=deep log_buf_len=16M cryptomgr.notests usbcore.quirks=0cf3:e300:e,04f3:2234:e,0c45:670c:e
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000556aafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000556ab000-0x00000000556abfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000556ac000-0x00000000556acfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000556ad000-0x0000000064df3fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000064df4000-0x000000006517ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000065180000-0x00000000651c3fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000651c4000-0x000000006f871fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000006f872000-0x000000006fffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x0000000077ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000078000000-0x00000000785fffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000078600000-0x000000007c7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004817fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] efi: EFI v2.4 by American Megatrends
[ 0.000000] efi: ACPI=0x6518d000 ACPI 2.0=0x6518d000 SMBIOS=0xf0000 SMBIOS 3.0=0xf0020 TPMFinalLog=0x6f812000 ESRT=0x6fc86698 MEMATTR=0x62675018 INITRD=0x5577da98 TPMEventLog=0x65188018
[ 0.000000] efi: Remove mem36: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
[ 0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved
[ 0.000000] efi: Not removing mem37: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
[ 0.000000] efi: Not removing mem38: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem39: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[ 0.000000] efi: Remove mem40: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[ 0.000000] secureboot: Secure boot disabled
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0 06/02/2022
[ 0.000000] DMI: Memory slots populated: 2/2
[ 0.000000] tsc: Detected 2900.000 MHz processor
[ 0.000000] tsc: Detected 2899.886 MHz TSC
[ 0.000680] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000682] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000690] last_pfn = 0x481800 max_arch_pfn = 0x400000000
[ 0.000694] MTRR map: 4 entries (3 fixed + 1 variable; max 23), built from 10 variable MTRRs
[ 0.000695] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001016] last_pfn = 0x78600 max_arch_pfn = 0x400000000
[ 0.007493] esrt: Reserving ESRT space from 0x000000006fc86698 to 0x000000006fc866d0.
[ 0.007498] Using GB pages for direct mapping
[ 0.020114] printk: log buffer data + meta data: 16777216 + 58720256 = 75497472 bytes
[ 0.020116] printk: early log buf free: 127288(97%)
[ 0.020117] RAMDISK: [mem 0x50bc0000-0x51be8fff]
[ 0.020136] ACPI: Early table checksum verification disabled
[ 0.020139] ACPI: RSDP 0x000000006518D000 000024 (v02 DELL )
[ 0.020143] ACPI: XSDT 0x000000006518D0C8 00010C (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.020147] ACPI: FACP 0x00000000651B2A48 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.020152] ACPI: DSDT 0x000000006518D260 0257E7 (v02 DELL CBX3 01072009 INTL 20160422)
[ 0.020155] ACPI: FACS 0x000000006F86F180 000040
[ 0.020157] ACPI: APIC 0x00000000651B2B58 000084 (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.020159] ACPI: FPDT 0x00000000651B2BE0 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.020162] ACPI: FIDT 0x00000000651B2C28 0000AC (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.020164] ACPI: MCFG 0x00000000651B2CD8 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.020167] ACPI: HPET 0x00000000651B2D18 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
[ 0.020169] ACPI: SSDT 0x00000000651B2D50 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
[ 0.020172] ACPI: BOOT 0x00000000651B30B0 000028 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.020174] ACPI: SSDT 0x00000000651B30D8 0012CF (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.020177] ACPI: HPET 0x00000000651B43A8 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F)
[ 0.020179] ACPI: SSDT 0x00000000651B43E0 000D84 (v02 INTEL xh_rvp07 00000000 INTL 20160422)
[ 0.020182] ACPI: UEFI 0x00000000651B5168 000042 (v01 00000000 00000000)
[ 0.020184] ACPI: SSDT 0x00000000651B51B0 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 0.020187] ACPI: LPIT 0x00000000651B6090 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F)
[ 0.020189] ACPI: WSMT 0x00000000651B6128 000028 (v01 DELL CBX3 00000000 MSFT 0000005F)
[ 0.020192] ACPI: SSDT 0x00000000651B6150 000161 (v02 INTEL HdaDsp 00000000 INTL 20160422)
[ 0.020194] ACPI: SSDT 0x00000000651B62B8 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 0.020197] ACPI: SSDT 0x00000000651B6558 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
[ 0.020204] ACPI: SSDT 0x00000000651B9560 0000DB (v02 INTEL TbtTypeC 00000000 INTL 20160422)
[ 0.020208] ACPI: DBGP 0x00000000651B9640 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.020211] ACPI: DBG2 0x00000000651B9678 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.020213] ACPI: SSDT 0x00000000651B96D0 0007DD (v02 INTEL UsbCTabl 00001000 INTL 20160422)
[ 0.020216] ACPI: SSDT 0x00000000651B9EB0 0084F1 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[ 0.020218] ACPI: SLIC 0x00000000651C23A8 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 0.020221] ACPI: NHLT 0x00000000651C2520 00002D (v00 INTEL EDK2 00000002 01000013)
[ 0.020223] ACPI: BGRT 0x00000000651C2550 000038 (v00 01072009 AMI 00010013)
[ 0.020226] ACPI: TPM2 0x00000000651C2588 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
[ 0.020228] ACPI: ASF! 0x00000000651C25C0 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.020231] ACPI: DMAR 0x00000000651C2660 0000F0 (v01 INTEL KBL 00000001 INTL 00000001)
[ 0.020233] ACPI: Reserving FACP table memory at [mem 0x651b2a48-0x651b2b53]
[ 0.020234] ACPI: Reserving DSDT table memory at [mem 0x6518d260-0x651b2a46]
[ 0.020235] ACPI: Reserving FACS table memory at [mem 0x6f86f180-0x6f86f1bf]
[ 0.020236] ACPI: Reserving APIC table memory at [mem 0x651b2b58-0x651b2bdb]
[ 0.020236] ACPI: Reserving FPDT table memory at [mem 0x651b2be0-0x651b2c23]
[ 0.020237] ACPI: Reserving FIDT table memory at [mem 0x651b2c28-0x651b2cd3]
[ 0.020237] ACPI: Reserving MCFG table memory at [mem 0x651b2cd8-0x651b2d13]
[ 0.020238] ACPI: Reserving HPET table memory at [mem 0x651b2d18-0x651b2d4f]
[ 0.020239] ACPI: Reserving SSDT table memory at [mem 0x651b2d50-0x651b30a8]
[ 0.020239] ACPI: Reserving BOOT table memory at [mem 0x651b30b0-0x651b30d7]
[ 0.020240] ACPI: Reserving SSDT table memory at [mem 0x651b30d8-0x651b43a6]
[ 0.020241] ACPI: Reserving HPET table memory at [mem 0x651b43a8-0x651b43df]
[ 0.020241] ACPI: Reserving SSDT table memory at [mem 0x651b43e0-0x651b5163]
[ 0.020242] ACPI: Reserving UEFI table memory at [mem 0x651b5168-0x651b51a9]
[ 0.020243] ACPI: Reserving SSDT table memory at [mem 0x651b51b0-0x651b608d]
[ 0.020243] ACPI: Reserving LPIT table memory at [mem 0x651b6090-0x651b6123]
[ 0.020244] ACPI: Reserving WSMT table memory at [mem 0x651b6128-0x651b614f]
[ 0.020244] ACPI: Reserving SSDT table memory at [mem 0x651b6150-0x651b62b0]
[ 0.020245] ACPI: Reserving SSDT table memory at [mem 0x651b62b8-0x651b6556]
[ 0.020246] ACPI: Reserving SSDT table memory at [mem 0x651b6558-0x651b9559]
[ 0.020246] ACPI: Reserving SSDT table memory at [mem 0x651b9560-0x651b963a]
[ 0.020247] ACPI: Reserving DBGP table memory at [mem 0x651b9640-0x651b9673]
[ 0.020248] ACPI: Reserving DBG2 table memory at [mem 0x651b9678-0x651b96cb]
[ 0.020248] ACPI: Reserving SSDT table memory at [mem 0x651b96d0-0x651b9eac]
[ 0.020249] ACPI: Reserving SSDT table memory at [mem 0x651b9eb0-0x651c23a0]
[ 0.020249] ACPI: Reserving SLIC table memory at [mem 0x651c23a8-0x651c251d]
[ 0.020250] ACPI: Reserving NHLT table memory at [mem 0x651c2520-0x651c254c]
[ 0.020251] ACPI: Reserving BGRT table memory at [mem 0x651c2550-0x651c2587]
[ 0.020251] ACPI: Reserving TPM2 table memory at [mem 0x651c2588-0x651c25bb]
[ 0.020252] ACPI: Reserving ASF! table memory at [mem 0x651c25c0-0x651c265f]
[ 0.020253] ACPI: Reserving DMAR table memory at [mem 0x651c2660-0x651c274f]
[ 0.020451] No NUMA configuration found
[ 0.020452] Faking a node at [mem 0x0000000000000000-0x00000004817fffff]
[ 0.020464] NODE_DATA(0) allocated [mem 0x47cfd5500-0x47cffffff]
[ 0.020655] Zone ranges:
[ 0.020656] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.020658] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.020659] Normal [mem 0x0000000100000000-0x00000004817fffff]
[ 0.020660] Device empty
[ 0.020661] Movable zone start for each node
[ 0.020663] Early memory node ranges
[ 0.020663] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.020665] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.020665] node 0: [mem 0x0000000000100000-0x00000000556aafff]
[ 0.020666] node 0: [mem 0x00000000556ad000-0x0000000064df3fff]
[ 0.020667] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
[ 0.020668] node 0: [mem 0x0000000078000000-0x00000000785fffff]
[ 0.020668] node 0: [mem 0x0000000100000000-0x00000004817fffff]
[ 0.020671] Initmem setup node 0 [mem 0x0000000000001000-0x00000004817fffff]
[ 0.020675] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.020676] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.020698] On node 0, zone DMA: 98 pages in unavailable ranges
[ 0.023052] On node 0, zone DMA32: 2 pages in unavailable ranges
[ 0.023372] On node 0, zone DMA32: 45579 pages in unavailable ranges
[ 0.023804] On node 0, zone Normal: 31232 pages in unavailable ranges
[ 0.023989] On node 0, zone Normal: 26624 pages in unavailable ranges
[ 0.023996] Reserving Intel graphics memory at [mem 0x7a800000-0x7c7fffff]
[ 0.024177] ACPI: PM-Timer IO Port: 0x1808
[ 0.024184] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.024185] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.024186] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.024186] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.024213] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.024215] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.024217] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.024220] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.024221] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.024227] e820: update [mem 0x6225f000-0x623ebfff] usable ==> reserved
[ 0.024237] TSC deadline timer available
[ 0.024242] CPU topo: Max. logical packages: 1
[ 0.024243] CPU topo: Max. logical dies: 1
[ 0.024243] CPU topo: Max. dies per package: 1
[ 0.024253] CPU topo: Max. threads per core: 2
[ 0.024253] CPU topo: Num. cores per package: 2
[ 0.024254] CPU topo: Num. threads per package: 4
[ 0.024254] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[ 0.024271] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.024273] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.024274] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[ 0.024276] PM: hibernation: Registered nosave memory: [mem 0x556ab000-0x556acfff]
[ 0.024277] PM: hibernation: Registered nosave memory: [mem 0x6225f000-0x623ebfff]
[ 0.024279] PM: hibernation: Registered nosave memory: [mem 0x64df4000-0x6fffefff]
[ 0.024280] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x77ffffff]
[ 0.024282] PM: hibernation: Registered nosave memory: [mem 0x78600000-0xffffffff]
[ 0.024283] [mem 0x7c800000-0xfdffffff] available for PCI devices
[ 0.024284] Booting paravirtualized kernel on bare hardware
[ 0.024286] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.029686] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.029935] percpu: Embedded 62 pages/cpu s217088 r8192 d28672 u524288
[ 0.029942] pcpu-alloc: s217088 r8192 d28672 u524288 alloc=1*2097152
[ 0.029944] pcpu-alloc: [0] 0 1 2 3
[ 0.029964] Kernel command line: BOOT_IMAGE=/vmlinuz-6.19-amd64 root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer mem_sleep_default=deep log_buf_len=16M cryptomgr.notests usbcore.quirks=0cf3:e300:e,04f3:2234:e,0c45:670c:e
[ 0.030069] random: crng init done
[ 0.031737] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.032487] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.032556] software IO TLB: area num 4.
[ 0.044718] Fallback order for Node 0: 0
[ 0.044720] Built 1 zonelists, mobility grouping on. Total pages: 4090767
[ 0.044721] Policy zone: Normal
[ 0.044727] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.051386] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.051412] Kernel/User page tables isolation: enabled
[ 0.059812] ftrace: allocating 48526 entries in 192 pages
[ 0.059814] ftrace: allocated 192 pages with 2 groups
[ 0.060329] Dynamic Preempt: lazy
[ 0.060360] rcu: Preemptible hierarchical RCU implementation.
[ 0.060361] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.060362] Trampoline variant of Tasks RCU enabled.
[ 0.060363] Rude variant of Tasks RCU enabled.
[ 0.060363] Tracing variant of Tasks RCU enabled.
[ 0.060364] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.060364] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.060370] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.060372] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.060373] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.065572] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[ 0.065785] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.065965] spurious 8259A interrupt: IRQ7.
[ 0.065989] Console: colour dummy device 80x25
[ 0.065991] printk: legacy console [tty0] enabled
[ 0.066029] ACPI: Core revision 20250807
[ 0.066167] hpet: HPET dysfunctional in PC10. Force disabled.
[ 0.066220] APIC: Switch to symmetric I/O mode setup
[ 0.066222] DMAR: Host address width 39
[ 0.066223] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.066228] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.066231] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.066234] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.066236] DMAR: RMRR base: 0x00000064ec2000 end: 0x00000064ee1fff
[ 0.066238] DMAR: RMRR base: 0x0000007a000000 end: 0x0000007c7fffff
[ 0.066239] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.066240] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.066242] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.066243] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.066244] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.067854] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.067856] x2apic enabled
[ 0.067914] APIC: Switched APIC routing to: cluster x2apic
[ 0.071823] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29ccd767b87, max_idle_ns: 440795223720 ns
[ 0.071828] Calibrating delay loop (skipped), value calculated using timer frequency.. 5799.77 BogoMIPS (lpj=11599544)
[ 0.071861] CPU0: Thermal monitoring enabled (TM1)
[ 0.071897] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.071899] Last level dTLB entries: 4KB 64, 2MB 32, 4MB 32, 1GB 4
[ 0.071902] process: using mwait in idle threads
[ 0.071905] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
[ 0.071909] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.071910] SRBDS: Mitigation: Microcode
[ 0.071912] Spectre V2 : Mitigation: IBRS
[ 0.071913] RETBleed: Mitigation: IBRS
[ 0.071913] Spectre V2 : User space: Mitigation: STIBP via prctl
[ 0.071914] MDS: Mitigation: Clear CPU buffers
[ 0.071915] MMIO Stale Data: Mitigation: Clear CPU buffers
[ 0.071916] VMSCAPE: Mitigation: IBPB before exit to userspace
[ 0.071917] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.071918] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[ 0.071919] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.071929] GDS: Mitigation: Microcode
[ 0.071935] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.071937] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.071938] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.071939] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.071940] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.071942] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.071944] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.071945] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.071947] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.075826] Freeing SMP alternatives memory: 44K
[ 0.075826] pid_max: default: 32768 minimum: 301
[ 0.075826] landlock: Up and running.
[ 0.075826] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.075826] AppArmor: AppArmor initialized
[ 0.075826] TOMOYO Linux initialized
[ 0.075826] LSM support for eBPF active
[ 0.075826] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.075826] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.075826] smpboot: CPU0: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[ 0.075826] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.075826] ... version: 4
[ 0.075826] ... bit width: 48
[ 0.075826] ... generic counters: 4
[ 0.075826] ... generic bitmap: 000000000000000f
[ 0.075826] ... fixed-purpose counters: 3
[ 0.075826] ... fixed-purpose bitmap: 0000000000000007
[ 0.075826] ... value mask: 0000ffffffffffff
[ 0.075826] ... max period: 00007fffffffffff
[ 0.075826] ... global_ctrl mask: 000000070000000f
[ 0.075826] signal: max sigframe size: 2032
[ 0.075826] Estimated ratio of average max frequency by base frequency (times 1024): 1235
[ 0.075826] rcu: Hierarchical SRCU implementation.
[ 0.075826] rcu: Max phase no-delay instances is 1000.
[ 0.075826] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.075826] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.075826] smp: Bringing up secondary CPUs ...
[ 0.075826] smpboot: x86: Booting SMP configuration:
[ 0.075826] .... node #0, CPUs: #1 #2 #3
[ 0.075826] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.075826] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
[ 0.075826] VMSCAPE: SMT on, STIBP is required for full protection. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/vmscape.html for more details.
[ 0.075826] smp: Brought up 1 node, 4 CPUs
[ 0.075826] smpboot: Total of 4 processors activated (23199.08 BogoMIPS)
[ 0.095831] node 0 deferred pages initialised in 20ms
[ 0.097230] Memory: 15854348K/16363068K available (17866K kernel code, 3349K rwdata, 13040K rodata, 4472K init, 5532K bss, 498084K reserved, 0K cma-reserved)
[ 0.097230] devtmpfs: initialized
[ 0.097230] x86/mm: Memory block size: 128MB
[ 0.097447] ACPI: PM: Registering ACPI NVS region [mem 0x556ab000-0x556abfff] (4096 bytes)
[ 0.097447] ACPI: PM: Registering ACPI NVS region [mem 0x651c4000-0x6f871fff] (174776320 bytes)
[ 0.100432] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.100432] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.100432] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[ 0.100432] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.100663] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.100777] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.100900] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.100914] audit: initializing netlink subsys (disabled)
[ 0.100932] audit: type=2000 audit(1770442078.000:1): state=initialized audit_enabled=0 res=1
[ 0.100932] thermal_sys: Registered thermal governor 'fair_share'
[ 0.100932] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.100932] thermal_sys: Registered thermal governor 'step_wise'
[ 0.100932] thermal_sys: Registered thermal governor 'user_space'
[ 0.100932] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.100932] cpuidle: using governor ladder
[ 0.100932] cpuidle: using governor menu
[ 0.100932] Simple Boot Flag at 0x47 set to 0x80
[ 0.100932] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.100932] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.100932] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[ 0.100932] PCI: Using configuration type 1 for base access
[ 0.100932] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.100932] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.100932] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.100932] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.100932] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.104116] ACPI: Added _OSI(Module Device)
[ 0.104119] ACPI: Added _OSI(Processor Device)
[ 0.104120] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.136637] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.140074] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.144541] ACPI: Dynamic OEM Table Load:
[ 0.144548] ACPI: SSDT 0xFFFF89308235A000 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.145519] ACPI: Dynamic OEM Table Load:
[ 0.145524] ACPI: SSDT 0xFFFF893082326000 0006F6 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.147095] ACPI: Dynamic OEM Table Load:
[ 0.147101] ACPI: SSDT 0xFFFF893082325800 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.148976] ACPI: Dynamic OEM Table Load:
[ 0.148980] ACPI: SSDT 0xFFFF8930823D2E00 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.151508] ACPI: EC: EC started
[ 0.151510] ACPI: EC: interrupt blocked
[ 0.155944] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.155951] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
[ 0.155954] ACPI: Interpreter enabled
[ 0.155989] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.155991] ACPI: Using IOAPIC for interrupt routing
[ 0.156027] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.156029] PCI: Using E820 reservations for host bridge windows
[ 0.156510] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 0.161320] ACPI: \_SB_.PCI0.RP09.PXSX.WRST: New power resource
[ 0.161573] ACPI: \_SB_.PCI0.RP10.PXSX.WRST: New power resource
[ 0.161821] ACPI: \_SB_.PCI0.RP11.PXSX.WRST: New power resource
[ 0.162070] ACPI: \_SB_.PCI0.RP12.PXSX.WRST: New power resource
[ 0.162317] ACPI: \_SB_.PCI0.RP13.PXSX.WRST: New power resource
[ 0.162564] ACPI: \_SB_.PCI0.RP01.PXSX.WRST: New power resource
[ 0.163828] ACPI: \_SB_.PCI0.RP02.PXSX.WRST: New power resource
[ 0.163828] ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource
[ 0.163828] ACPI: \_SB_.PCI0.RP04.PXSX.WRST: New power resource
[ 0.163919] ACPI: \_SB_.PCI0.RP05.PXSX.WRST: New power resource
[ 0.164169] ACPI: \_SB_.PCI0.RP06.PXSX.WRST: New power resource
[ 0.164425] ACPI: \_SB_.PCI0.RP07.PXSX.WRST: New power resource
[ 0.164671] ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource
[ 0.164918] ACPI: \_SB_.PCI0.RP17.PXSX.WRST: New power resource
[ 0.167827] ACPI: \_SB_.PCI0.RP18.PXSX.WRST: New power resource
[ 0.167827] ACPI: \_SB_.PCI0.RP19.PXSX.WRST: New power resource
[ 0.167827] ACPI: \_SB_.PCI0.RP20.PXSX.WRST: New power resource
[ 0.167828] ACPI: \_SB_.PCI0.RP14.PXSX.WRST: New power resource
[ 0.167828] ACPI: \_SB_.PCI0.RP15.PXSX.WRST: New power resource
[ 0.167828] ACPI: \_SB_.PCI0.RP16.PXSX.WRST: New power resource
[ 0.187829] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.187829] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.187829] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[ 0.187829] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR]
[ 0.187829] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.187829] PCI host bridge to bus 0000:00
[ 0.187829] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.187829] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.187829] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[ 0.187829] pci_bus 0000:00: root bus resource [mem 0x7c800000-0xdfffffff window]
[ 0.187829] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.187829] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.187829] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000 conventional PCI endpoint
[ 0.187829] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
[ 0.187829] pci 0000:00:02.0: BAR 0 [mem 0xdb000000-0xdbffffff 64bit]
[ 0.187829] pci 0000:00:02.0: BAR 2 [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.187829] pci 0000:00:02.0: BAR 4 [io 0xf000-0xf03f]
[ 0.187829] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.187829] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 conventional PCI endpoint
[ 0.187829] pci 0000:00:04.0: BAR 0 [mem 0xdc420000-0xdc427fff 64bit]
[ 0.187876] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 conventional PCI endpoint
[ 0.187912] pci 0000:00:14.0: BAR 0 [mem 0xdc410000-0xdc41ffff 64bit]
[ 0.187946] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.188388] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 conventional PCI endpoint
[ 0.188419] pci 0000:00:14.2: BAR 0 [mem 0xdc434000-0xdc434fff 64bit]
[ 0.188540] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 conventional PCI endpoint
[ 0.188620] pci 0000:00:15.0: BAR 0 [mem 0xdc433000-0xdc433fff 64bit]
[ 0.188929] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000 conventional PCI endpoint
[ 0.188971] pci 0000:00:15.1: BAR 0 [mem 0xdc432000-0xdc432fff 64bit]
[ 0.189239] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 conventional PCI endpoint
[ 0.189269] pci 0000:00:16.0: BAR 0 [mem 0xdc431000-0xdc431fff 64bit]
[ 0.189299] pci 0000:00:16.0: PME# supported from D3hot
[ 0.189597] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400 PCIe Root Port
[ 0.189614] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 0.189619] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 0.189626] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.189670] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.189687] pci 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
[ 0.190043] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400 PCIe Root Port
[ 0.190059] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 0.190064] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff]
[ 0.190115] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.190131] pci 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled
[ 0.190477] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400 PCIe Root Port
[ 0.190493] pci 0000:00:1c.5: PCI bridge to [bus 3b]
[ 0.190497] pci 0000:00:1c.5: bridge window [mem 0xdc300000-0xdc3fffff]
[ 0.190548] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.190564] pci 0000:00:1c.5: Intel SPT PCH root port ACS workaround enabled
[ 0.190911] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400 PCIe Root Port
[ 0.190928] pci 0000:00:1d.0: PCI bridge to [bus 3c]
[ 0.190932] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.190982] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.190999] pci 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
[ 0.191365] pci 0000:00:1f.0: [8086:9d58] type 00 class 0x060100 conventional PCI endpoint
[ 0.191630] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 conventional PCI endpoint
[ 0.191665] pci 0000:00:1f.2: BAR 0 [mem 0xdc42c000-0xdc42ffff]
[ 0.191845] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380 conventional PCI endpoint
[ 0.191888] pci 0000:00:1f.3: BAR 0 [mem 0xdc428000-0xdc42bfff 64bit]
[ 0.191895] pci 0000:00:1f.3: BAR 4 [mem 0xdc400000-0xdc40ffff 64bit]
[ 0.191933] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.192454] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.192587] pci 0000:00:1f.4: BAR 0 [mem 0xdc430000-0xdc4300ff 64bit]
[ 0.192598] pci 0000:00:1f.4: BAR 4 [io 0xf040-0xf05f]
[ 0.192851] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 0.193276] pci 0000:3a:00.0: [168c:003e] type 00 class 0x028000 PCIe Endpoint
[ 0.193720] pci 0000:3a:00.0: BAR 0 [mem 0xdc000000-0xdc1fffff 64bit]
[ 0.194700] pci 0000:3a:00.0: PME# supported from D0 D3hot D3cold
[ 0.196194] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 0.196279] pci 0000:3b:00.0: [10ec:525a] type 00 class 0xff0000 PCIe Endpoint
[ 0.196325] pci 0000:3b:00.0: BAR 1 [mem 0xdc300000-0xdc300fff]
[ 0.196406] pci 0000:3b:00.0: supports D1 D2
[ 0.196408] pci 0000:3b:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.196707] pci 0000:00:1c.5: PCI bridge to [bus 3b]
[ 0.196790] pci 0000:3c:00.0: [1c5c:1284] type 00 class 0x010802 PCIe Endpoint
[ 0.196831] pci 0000:3c:00.0: BAR 0 [mem 0xdc200000-0xdc203fff 64bit]
[ 0.196910] pci 0000:3c:00.0: PME# supported from D0 D1 D3hot
[ 0.197215] pci 0000:00:1d.0: PCI bridge to [bus 3c]
[ 0.204421] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 0.204462] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.204502] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.204540] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.204579] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[ 0.204617] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[ 0.204656] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[ 0.204694] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[ 0.210851] ACPI: EC: interrupt unblocked
[ 0.210854] ACPI: EC: event unblocked
[ 0.210861] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.210863] ACPI: EC: GPE=0x14
[ 0.210864] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete
[ 0.210867] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events
[ 0.211848] iommu: Default domain type: Translated
[ 0.211848] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.212000] pps_core: LinuxPPS API ver. 1 registered
[ 0.212000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
[ 0.212000] PTP clock support registered
[ 0.212000] EDAC MC: Ver: 3.0.0
[ 0.212206] efivars: Registered efivars operations
[ 0.212206] NetLabel: Initializing
[ 0.212206] NetLabel: domain hash size = 128
[ 0.212206] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.212206] NetLabel: unlabeled traffic allowed by default
[ 0.212206] PCI: Using ACPI for IRQ routing
[ 0.235431] PCI: pci_cache_line_size set to 64 bytes
[ 0.235770] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.235772] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.235773] e820: reserve RAM buffer [mem 0x556ab000-0x57ffffff]
[ 0.235774] e820: reserve RAM buffer [mem 0x6225f000-0x63ffffff]
[ 0.235775] e820: reserve RAM buffer [mem 0x64df4000-0x67ffffff]
[ 0.235777] e820: reserve RAM buffer [mem 0x78600000-0x7bffffff]
[ 0.235778] e820: reserve RAM buffer [mem 0x481800000-0x483ffffff]
[ 0.235838] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.235838] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.235838] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.235841] vgaarb: loaded
[ 0.235935] clocksource: Switched to clocksource tsc-early
[ 0.236073] VFS: Disk quotas dquot_6.6.0
[ 0.236082] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.236181] AppArmor: AppArmor Filesystem Enabled
[ 0.236223] pnp: PnP ACPI init
[ 0.236470] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.236474] system 00:00: [io 0xffff] has been reserved
[ 0.236476] system 00:00: [io 0xffff] has been reserved
[ 0.236478] system 00:00: [io 0xffff] has been reserved
[ 0.236480] system 00:00: [io 0x1800-0x18fe] could not be reserved
[ 0.236482] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.236925] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.236928] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.236930] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.236932] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.236934] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.236936] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.236937] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.236939] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[ 0.236941] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.236943] system 00:04: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.236980] system 00:05: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.236982] system 00:05: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.236984] system 00:05: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.236985] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.236987] system 00:05: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.236989] system 00:05: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.236991] system 00:05: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.237230] system 00:06: [io 0xff00-0xfffe] has been reserved
[ 0.238085] system 00:07: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.238088] system 00:07: [mem 0xfe028000-0xfe028fff] has been reserved
[ 0.241825] pnp: PnP ACPI: found 8 devices
[ 0.247916] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.247980] NET: Registered PF_INET protocol family
[ 0.248094] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.261790] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.261812] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.261847] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.262072] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.262274] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.262372] MPTCP token hash table entries: 16384 (order: 7, 393216 bytes, linear)
[ 0.262430] UDP hash table entries: 8192 (order: 7, 524288 bytes, linear)
[ 0.262493] UDP-Lite hash table entries: 8192 (order: 7, 524288 bytes, linear)
[ 0.262576] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.262583] NET: Registered PF_XDP protocol family
[ 0.262592] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-39] add_size 1000
[ 0.262604] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]: assigned
[ 0.262607] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 0.262610] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.262613] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 0.262616] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.262620] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 0.262624] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff]
[ 0.262629] pci 0000:00:1c.5: PCI bridge to [bus 3b]
[ 0.262632] pci 0000:00:1c.5: bridge window [mem 0xdc300000-0xdc3fffff]
[ 0.262637] pci 0000:00:1d.0: PCI bridge to [bus 3c]
[ 0.262640] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.262646] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.262648] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.262649] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
[ 0.262651] pci_bus 0000:00: resource 7 [mem 0x7c800000-0xdfffffff window]
[ 0.262652] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.262654] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.262655] pci_bus 0000:01: resource 1 [mem 0xc4000000-0xda0fffff]
[ 0.262657] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.262658] pci_bus 0000:3a: resource 1 [mem 0xdc000000-0xdc1fffff]
[ 0.262660] pci_bus 0000:3b: resource 1 [mem 0xdc300000-0xdc3fffff]
[ 0.262661] pci_bus 0000:3c: resource 1 [mem 0xdc200000-0xdc2fffff]
[ 0.263232] PCI: CLS 0 bytes, default 64
[ 0.263279] pci 0000:00:1f.1: [8086:9d20] type 00 class 0x058000 conventional PCI endpoint
[ 0.263417] pci 0000:00:1f.1: BAR 0 [mem 0xfd000000-0xfdffffff 64bit]
[ 0.263569] DMAR: ACPI device "device:79" under DMAR at fed91000 as 00:15.0
[ 0.263572] DMAR: ACPI device "device:7a" under DMAR at fed91000 as 00:15.1
[ 0.263580] DMAR: No ATSR found
[ 0.263581] DMAR: No SATC found
[ 0.263582] DMAR: dmar0: Using Queued invalidation
[ 0.263585] DMAR: dmar1: Using Queued invalidation
[ 0.263650] Trying to unpack rootfs image as initramfs...
[ 0.263983] pci 0000:00:02.0: Adding to iommu group 0
[ 0.264018] pci 0000:00:00.0: Adding to iommu group 1
[ 0.264026] pci 0000:00:04.0: Adding to iommu group 2
[ 0.264041] pci 0000:00:14.0: Adding to iommu group 3
[ 0.264049] pci 0000:00:14.2: Adding to iommu group 3
[ 0.264064] pci 0000:00:15.0: Adding to iommu group 4
[ 0.264072] pci 0000:00:15.1: Adding to iommu group 4
[ 0.264082] pci 0000:00:16.0: Adding to iommu group 5
[ 0.264092] pci 0000:00:1c.0: Adding to iommu group 6
[ 0.264102] pci 0000:00:1c.4: Adding to iommu group 7
[ 0.264112] pci 0000:00:1c.5: Adding to iommu group 8
[ 0.264121] pci 0000:00:1d.0: Adding to iommu group 9
[ 0.264140] pci 0000:00:1f.0: Adding to iommu group 10
[ 0.264148] pci 0000:00:1f.2: Adding to iommu group 10
[ 0.264156] pci 0000:00:1f.3: Adding to iommu group 10
[ 0.264164] pci 0000:00:1f.4: Adding to iommu group 10
[ 0.264173] pci 0000:3a:00.0: Adding to iommu group 11
[ 0.264184] pci 0000:3b:00.0: Adding to iommu group 12
[ 0.264193] pci 0000:3c:00.0: Adding to iommu group 13
[ 0.264927] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 0.264932] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.264934] software IO TLB: mapped [mem 0x000000005e25f000-0x000000006225f000] (64MB)
[ 0.265022] sgx: EPC section 0x70200000-0x75f7ffff
[ 0.265586] sgx: SGX disabled: SGX launch control CPU feature is not available, /dev/sgx_enclave disabled.
[ 0.294443] Initialise system trusted keyrings
[ 0.294454] Key type blacklist registered
[ 0.294553] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.294732] fuse: init (API version 7.45)
[ 0.294867] integrity: Platform Keyring initialized
[ 0.294870] integrity: Machine keyring initialized
[ 0.294950] alg: self-tests disabled
[ 0.309194] Freeing initrd memory: 16548K
[ 0.315836] Key type asymmetric registered
[ 0.315839] Asymmetric key parser 'x509' registered
[ 0.315960] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.316006] io scheduler mq-deadline registered
[ 0.316291] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.319022] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.319025] ACPI: thermal: Thermal Zone [THM] (25 C)
[ 0.319153] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.319662] hpet_acpi_add: no address or irqs in _CRS
[ 0.319701] Linux agpgart interface v0.103
[ 0.331288] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFE, rev-id 4)
[ 0.365616] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.365885] i8042: Warning: Keylock active
[ 0.368102] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.368107] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.368225] mousedev: PS/2 mouse device common for all mice
[ 0.368247] rtc_cmos 00:01: RTC can wake from S4
[ 0.368976] rtc_cmos 00:01: registered as rtc0
[ 0.369118] rtc_cmos 00:01: setting system clock to 2026-02-07T05:27:59 UTC (1770442079)
[ 0.369144] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[ 0.369272] intel_pstate: Intel P-state driver initializing
[ 0.369490] intel_pstate: HWP enabled
[ 0.369788] efifb: probing for efifb
[ 0.369801] efifb: framebuffer at 0x90000000, using 22500k, total 22500k
[ 0.369802] efifb: mode is 3200x1800x32, linelength=12800, pages=1
[ 0.369804] efifb: scrolling: redraw
[ 0.369804] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.369925] Console: switching to colour frame buffer device 200x56
[ 0.372451] fb0: EFI VGA frame buffer device
[ 0.372599] NET: Registered PF_INET6 protocol family
[ 0.372875] Segment Routing with IPv6
[ 0.372877] RPL Segment Routing with IPv6
[ 0.372884] In-situ OAM (IOAM) with IPv6
[ 0.372900] mip6: Mobile IPv6
[ 0.372902] NET: Registered PF_PACKET protocol family
[ 0.372930] mpls_gso: MPLS GSO support
[ 0.372983] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.373185] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.374612] microcode: Current revision: 0x000000f6
[ 0.374614] microcode: Updated early from: 0x000000f0
[ 0.374700] IPI shorthand broadcast: enabled
[ 0.376566] sched_clock: Marking stable (368767957, 5914658)->(413791497, -39108882)
[ 0.376796] registered taskstats version 1
[ 0.376987] Loading compiled-in X.509 certificates
[ 0.382443] Loaded X.509 cert 'Build time autogenerated kernel key: b6cebd7a3d98b24913ff5681b379c8e734ec795a'
[ 0.384660] Demotion targets for Node 0: null
[ 0.384692] Key type .fscrypt registered
[ 0.384693] Key type fscrypt-provisioning registered
[ 0.394954] Key type encrypted registered
[ 0.394959] AppArmor: AppArmor sha256 policy hashing enabled
[ 0.394964] ima: Allocated hash algorithm: sha256
[ 0.433370] ima: No architecture policies found
[ 0.433395] evm: Initialising EVM extended attributes:
[ 0.433397] evm: security.selinux
[ 0.433400] evm: security.SMACK64 (disabled)
[ 0.433402] evm: security.SMACK64EXEC (disabled)
[ 0.433403] evm: security.SMACK64TRANSMUTE (disabled)
[ 0.433405] evm: security.SMACK64MMAP (disabled)
[ 0.433406] evm: security.apparmor
[ 0.433408] evm: security.ima
[ 0.433409] evm: security.capability
[ 0.433411] evm: HMAC attrs: 0x1
[ 0.433851] integrity: Loading X.509 certificate: UEFI:db
[ 0.433893] integrity: Loaded X.509 cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7'
[ 0.433896] integrity: Loading X.509 certificate: UEFI:db
[ 0.433951] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 0.433961] integrity: Loading X.509 certificate: UEFI:db
[ 0.433990] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 0.437520] RAS: Correctable Errors collector initialized.
[ 0.445763] clk: Disabling unused clocks
[ 0.445769] PM: genpd: Disabling unused power domains
[ 0.448421] Freeing unused decrypted memory: 2028K
[ 0.449684] Freeing unused kernel image (initmem) memory: 4472K
[ 0.449840] Write protecting the kernel read-only data: 32768k
[ 0.450578] Freeing unused kernel image (text/rodata gap) memory: 564K
[ 0.451219] Freeing unused kernel image (rodata/data gap) memory: 1296K
[ 0.503896] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.503899] x86/mm: Checking user space page tables
[ 0.545565] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.545570] Run /init as init process
[ 0.545571] with arguments:
[ 0.545572] /init
[ 0.545574] with environment:
[ 0.545575] HOME=/
[ 0.545575] TERM=linux
[ 0.793836] input: Intel HID events as /devices/platform/INT33D5:00/input/input2
[ 0.794003] intel-hid INT33D5:00: platform supports 5 button array
[ 0.794054] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input3
[ 0.796740] wmi_bus wmi_bus-PNP0C14:01: [Firmware Bug]: WQBC data block query control method not found
[ 0.828644] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 0.842877] Key type psk registered
[ 0.880501] nvme nvme0: pci function 0000:3c:00.0
[ 0.899413] nvme nvme0: 4/0/0 default/read/poll queues
[ 0.906341] nvme0n1: p1 p2 p3 p4
[ 0.917912] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492-3/input/input5
[ 0.950172] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 0.950204] device-mapper: uevent: version 1.0.3
[ 0.950294] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel at lists.linux.dev
[ 1.290150] tsc: Refined TSC clocksource calibration: 2904.008 MHz
[ 1.290174] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc0d988f1, max_idle_ns: 440795328788 ns
[ 1.290243] clocksource: Switched to clocksource tsc
[ 19.962340] PM: Image not found (code -22)
[ 20.143042] EXT4-fs (dm-0): mounted filesystem 32e29882-d94d-4a92-9ee4-4d03002bfa29 ro with ordered data mode. Quota mode: none.
[ 20.190814] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 20.324999] systemd[1]: Inserted module 'autofs4'
[ 20.390440] systemd[1]: systemd 259-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE)
[ 20.390461] systemd[1]: Detected architecture x86-64.
[ 20.394910] systemd[1]: Hostname set to <abreu>.
[ 20.596512] systemd[1]: bpf-restrict-fs: LSM BPF program attached
[ 20.643783] systemd-sysv-generator[487]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[ 20.643789] systemd-sysv-generator[487]: Please update package to include a native systemd unit file.
[ 20.643791] systemd-sysv-generator[487]: ! This compatibility logic is deprecated, expect removal soon. !
[ 20.803747] systemd[1]: Queued start job for default target graphical.target.
[ 20.840491] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 20.841063] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 20.841533] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice - Encrypted Volume Units Service Slice.
[ 20.842036] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 20.842342] systemd[1]: Created slice user.slice - User and Session Slice.
[ 20.842427] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[ 20.842485] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 20.842735] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 20.842763] systemd[1]: Expecting device dev-disk-by\x2ddiskseq-1\x2dpart4.device - /dev/disk/by-diskseq/1-part4...
[ 20.842776] systemd[1]: Expecting device dev-disk-by\x2duuid-2d23fd4c\x2d5d03\x2d4e1a\x2d8a42\x2d0e859d1f00d8.device - /dev/disk/by-uuid/2d23fd4c-5d03-4e1a-8a42-0e859d1f00d8...
[ 20.842787] systemd[1]: Expecting device dev-disk-by\x2duuid-61be8f50\x2d69c5\x2d49a5\x2dbcad\x2d3f4521e9c7b5.device - /dev/disk/by-uuid/61be8f50-69c5-49a5-bcad-3f4521e9c7b5...
[ 20.842800] systemd[1]: Expecting device dev-disk-by\x2duuid-96BD\x2d5653.device - /dev/disk/by-uuid/96BD-5653...
[ 20.842842] systemd[1]: Reached target imports.target - Image Downloads.
[ 20.842863] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 20.842899] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
[ 20.842924] systemd[1]: Reached target paths.target - Path Units.
[ 20.842952] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ 20.842970] systemd[1]: Reached target slices.target - Slice Units.
[ 20.843017] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 20.845283] systemd[1]: Listening on systemd-ask-password.socket - Query the User Interactively for a Password.
[ 20.846655] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.
[ 20.847652] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption.
[ 20.848747] systemd[1]: Listening on systemd-factory-reset.socket - Factory Reset Management.
[ 20.848857] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 20.848959] systemd[1]: Listening on systemd-journald.socket - Journal Sockets.
[ 20.850176] systemd[1]: Listening on systemd-mute-console.socket - Console Output Muting Service Socket.
[ 20.850307] systemd[1]: Listening on systemd-oomd.socket - Userspace Out-Of-Memory (OOM) Killer Socket.
[ 20.850351] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 20.850365] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 20.850448] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 20.850503] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 20.850568] systemd[1]: Listening on systemd-udevd-varlink.socket - udev Varlink Socket.
[ 20.850643] systemd[1]: Listening on systemd-userdbd.socket - User Database Manager Socket.
[ 20.851750] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[ 20.852562] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 20.853352] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 20.854799] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 20.858481] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 20.860151] systemd[1]: Starting modprobe at configfs.service - Load Kernel Module configfs...
[ 20.861900] systemd[1]: Starting modprobe at drm.service - Load Kernel Module drm...
[ 20.863751] systemd[1]: Starting modprobe at efi_pstore.service - Load Kernel Module efi_pstore...
[ 20.863812] systemd[1]: modprobe at fuse.service - Load Kernel Module fuse was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!fuse).
[ 20.866375] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 20.866691] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 20.866899] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[ 20.875250] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 20.888239] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 20.888294] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 20.888366] systemd[1]: systemd-pcrproduct.service - TPM NvPCR Product ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 20.889676] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 20.889762] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 20.891850] pstore: Using crash dump compression: deflate
[ 20.894240] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials...
[ 20.895520] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 20.902861] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 20.915013] systemd[1]: modprobe at configfs.service: Deactivated successfully.
[ 20.915240] systemd[1]: Finished modprobe at configfs.service - Load Kernel Module configfs.
[ 20.916764] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[ 20.916931] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 20.917061] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 20.917185] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 20.918358] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 20.921639] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
[ 20.923258] i2c_dev: i2c /dev entries driver
[ 20.925613] pstore: Registered efi_pstore as persistent store backend
[ 20.926334] systemd[1]: modprobe at efi_pstore.service: Deactivated successfully.
[ 20.926620] systemd[1]: Finished modprobe at efi_pstore.service - Load Kernel Module efi_pstore.
[ 20.926894] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 20.931707] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 20.934271] EXT4-fs (dm-0): re-mounted 32e29882-d94d-4a92-9ee4-4d03002bfa29 r/w.
[ 20.935136] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[ 20.938301] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[ 20.938380] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 20.939773] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
[ 20.939814] systemd[1]: systemd-tpm2-setup.service - TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 20.939848] systemd[1]: systemd-pcrnvdone.service - TPM PCR NvPCR Initialization Separator was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 20.940746] systemd-journald[501]: Collecting audit messages is disabled.
[ 20.944652] systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials.
[ 20.971801] ACPI: bus type drm_connector registered
[ 20.973052] systemd[1]: modprobe at drm.service: Deactivated successfully.
[ 20.973358] systemd[1]: Finished modprobe at drm.service - Load Kernel Module drm.
[ 20.987352] lp: driver loaded but no devices found
[ 20.990040] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully.
[ 20.990236] systemd[1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met.
[ 20.992586] systemd[1]: Starting systemd-timesyncd.service - Network Time Synchronization...
[ 20.994565] ppdev: user-space parallel port driver
[ 20.999638] Asymmetric key parser 'pkcs8' registered
[ 21.001546] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[ 21.014183] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[ 21.014650] systemd[1]: Finished systemd-random-seed.service - Load/Save OS Random Seed.
[ 21.018138] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[ 21.021007] systemd[1]: Starting systemd-userdbd.service - User Database Manager...
[ 21.021250] systemd[1]: Started systemd-journald.service - Journal Service.
[ 21.051783] systemd-journald[501]: Received client request to flush runtime journal.
[ 21.422725] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
[ 21.444187] ACPI: AC: AC Adapter [AC] (on-line)
[ 21.456025] ACPI: button: Lid Switch [LID0]
[ 21.460199] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
[ 21.465278] ACPI: button: Power Button [PBTN]
[ 21.465361] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input8
[ 21.465439] ACPI: button: Sleep Button [SBTN]
[ 21.465488] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input9
[ 21.465671] ACPI: button: Power Button [PWRF]
[ 21.470291] ACPI: battery: Slot [BAT0] (battery present)
[ 21.551872] intel_pmc_core INT33A1:00: initialized
[ 21.575562] input: Intel Virtual Buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input10
[ 21.627885] hid: raw HID events driver (C) Jiri Kosina
[ 21.667993] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 21.668267] platform idma64.0: Adding to iommu group 14
[ 21.668433] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 21.668490] platform i2c_designware.0: Adding to iommu group 15
[ 21.710738] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 21.710948] platform idma64.1: Adding to iommu group 16
[ 21.711105] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 21.711146] platform i2c_designware.1: Adding to iommu group 17
[ 21.725604] Adding 8387904k swap on /dev/nvme0n1p4. Priority:-1 extents:1 across:8387904k SS
[ 21.766336] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 21.766353] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 21.766667] ACPI: bus type USB registered
[ 21.766700] usbcore: registered new interface driver usbfs
[ 21.766710] usbcore: registered new interface driver hub
[ 21.766721] usbcore: registered new device driver usb
[ 21.767028] rtsx_pci 0000:3b:00.0: enabling device (0000 -> 0002)
[ 21.770007] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 21.788788] ACPI: bus type thunderbolt registered
[ 21.956251] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 21.956257] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 21.956259] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 21.956260] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 21.956261] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 21.956263] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 21.958654] intel_rapl_common: Found RAPL domain package
[ 21.958657] intel_rapl_common: Found RAPL domain core
[ 21.958659] intel_rapl_common: Found RAPL domain uncore
[ 21.958661] intel_rapl_common: Found RAPL domain dram
[ 21.958662] intel_rapl_common: Found RAPL domain psys
[ 21.966752] EXT4-fs (nvme0n1p2): mounted filesystem 2d23fd4c-5d03-4e1a-8a42-0e859d1f00d8 r/w with ordered data mode. Quota mode: none.
[ 22.028616] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 22.028628] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 22.029771] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[ 22.086514] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 22.089710] iTCO_vendor_support: vendor-support=0
[ 22.118206] intel_rapl_common: Found RAPL domain package
[ 22.118212] intel_rapl_common: Found RAPL domain dram
[ 22.128066] ACPI: battery: new hook: Dell Primary Battery Extension
[ 22.217500] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 22.217637] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 22.224583] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 22.224591] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 22.224596] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 22.225015] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.19
[ 22.225019] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 22.225022] usb usb1: Product: xHCI Host Controller
[ 22.225024] usb usb1: Manufacturer: Linux 6.19-amd64 xhci-hcd
[ 22.225026] usb usb1: SerialNumber: 0000:00:14.0
[ 22.227332] hub 1-0:1.0: USB hub found
[ 22.227356] hub 1-0:1.0: 12 ports detected
[ 22.251292] input: DLL075B:01 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input12
[ 22.252281] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.19
[ 22.252286] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 22.252288] usb usb2: Product: xHCI Host Controller
[ 22.252290] usb usb2: Manufacturer: Linux 6.19-amd64 xhci-hcd
[ 22.252292] usb usb2: SerialNumber: 0000:00:14.0
[ 22.252316] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 22.252633] Loaded X.509 cert 'benh at debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 22.252796] Loaded X.509 cert 'romain.perier at gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 22.252947] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 22.253090] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 22.253833] hub 2-0:1.0: USB hub found
[ 22.253853] hub 2-0:1.0: 6 ports detected
[ 22.266037] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input13
[ 22.266872] hid-generic 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01
[ 22.460193] audit: type=1400 audit(1770442101.585:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=637 comm="apparmor_parser"
[ 22.460506] audit: type=1400 audit(1770442101.585:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=636 comm="apparmor_parser"
[ 22.460775] audit: type=1400 audit(1770442101.585:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=634 comm="apparmor_parser"
[ 22.461150] audit: type=1400 audit(1770442101.585:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=638 comm="apparmor_parser"
[ 22.467249] audit: type=1400 audit(1770442101.593:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=640 comm="apparmor_parser"
[ 22.469777] audit: type=1400 audit(1770442101.593:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=642 comm="apparmor_parser"
[ 22.471083] audit: type=1400 audit(1770442101.597:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=641 comm="apparmor_parser"
[ 22.471090] audit: type=1400 audit(1770442101.597:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=643 comm="apparmor_parser"
[ 22.476434] audit: type=1400 audit(1770442101.601:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=645 comm="apparmor_parser"
[ 22.477059] audit: type=1400 audit(1770442101.601:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=644 comm="apparmor_parser"
[ 22.477479] input: DLL075B:01 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input15
[ 22.479297] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input16
[ 22.486108] hid-multitouch 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01
[ 22.509970] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 22.621218] ath10k_pci 0000:3a:00.0: enabling device (0000 -> 0002)
[ 22.638933] ath10k_pci 0000:3a:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 22.708346] usb 1-3: New USB device found, idVendor=0cf3, idProduct=e300, bcdDevice= 0.01
[ 22.708352] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 22.865935] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[ 22.905629] ath10k_pci 0000:3a:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:3a:00.0.bin (-2)
[ 22.905648] ath10k_pci 0000:3a:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:3a:00.0.bin (-2)
[ 22.905659] ath10k_pci 0000:3a:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:3a:00.0.bin (-2)
[ 22.905674] ath10k_pci 0000:3a:00.0: firmware: failed to load ath10k/cal-pci-0000:3a:00.0.bin (-2)
[ 22.905684] ath10k_pci 0000:3a:00.0: firmware: failed to load ath10k/cal-pci-0000:3a:00.0.bin (-2)
[ 22.905697] ath10k_pci 0000:3a:00.0: firmware: failed to load ath10k/cal-pci-0000:3a:00.0.bin (-2)
[ 22.911491] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[ 22.911498] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[ 22.911580] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
[ 22.981125] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
[ 23.040397] usb 1-4: New USB device found, idVendor=04f3, idProduct=2234, bcdDevice=11.11
[ 23.040406] usb 1-4: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[ 23.040409] usb 1-4: Product: Touchscreen
[ 23.040413] usb 1-4: Manufacturer: ELAN
[ 23.071837] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 23.144368] ath: EEPROM regdomain: 0x6c
[ 23.144372] ath: EEPROM indicates we should expect a direct regpair map
[ 23.144375] ath: Country alpha2 being used: 00
[ 23.144376] ath: Regpair used: 0x6c
[ 23.155342] ath10k_pci 0000:3a:00.0 wlp58s0: renamed from wlan0
[ 23.157975] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[ 23.347128] i915 0000:00:02.0: [drm] Found kabylake/ult (device ID 5916) integrated display version 9.00 stepping B0
[ 23.347778] i915 0000:00:02.0: [drm] VT-d active for gfx access
[ 23.347901] Console: switching to colour dummy device 80x25
[ 23.347929] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 23.347977] i915 0000:00:02.0: [drm] Using Transparent Hugepages
[ 23.353366] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 23.359279] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 23.365932] usb 1-5: New USB device found, idVendor=0c45, idProduct=670c, bcdDevice=56.26
[ 23.365940] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 23.365942] usb 1-5: Product: Integrated_Webcam_HD
[ 23.365944] usb 1-5: Manufacturer: CN09GTFMLOG008C8B7FWA01
[ 23.422094] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[ 23.444259] mc: Linux media interface: v0.10
[ 23.458476] i915 0000:00:02.0: [drm] Registered 3 planes with drm panic
[ 23.481930] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0
[ 23.520243] nvme nvme0: using unchecked data buffer
[ 23.531787] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 23.532519] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input18
[ 23.556237] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input19
[ 23.556348] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input20
[ 23.557241] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input21
[ 23.557366] hid-multitouch 0003:04F3:2234.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0
[ 23.557412] usbcore: registered new interface driver usbhid
[ 23.557414] usbhid: USB HID core driver
[ 23.572305] fbcon: i915drmfb (fb0) is primary device
[ 23.589439] Console: switching to colour frame buffer device 200x56
[ 23.590340] videodev: Linux video capture interface: v2.00
[ 23.641656] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 23.669854] Bluetooth: Core ver 2.22
[ 23.669905] NET: Registered PF_BLUETOOTH protocol family
[ 23.669907] Bluetooth: HCI device and connection manager initialized
[ 23.669911] Bluetooth: HCI socket layer initialized
[ 23.669914] Bluetooth: L2CAP socket layer initialized
[ 23.670627] Bluetooth: SCO socket layer initialized
[ 23.772258] usbcore: registered new interface driver btusb
[ 23.778749] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[ 23.778754] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[ 23.826572] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 23.826797] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])
[ 23.904756] snd_hda_codec_alc269 hdaudioC0D0: ALC3246: picked fixup (pin match)
[ 23.942460] snd_hda_codec_alc269 hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 23.942467] snd_hda_codec_alc269 hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 23.942470] snd_hda_codec_alc269 hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 23.942473] snd_hda_codec_alc269 hdaudioC0D0: mono: mono_out=0x0
[ 23.942475] snd_hda_codec_alc269 hdaudioC0D0: inputs:
[ 23.942477] snd_hda_codec_alc269 hdaudioC0D0: Internal Mic=0x12
[ 23.942480] snd_hda_codec_alc269 hdaudioC0D0: Headset Mic=0x19
[ 23.942482] snd_hda_codec_alc269 hdaudioC0D0: Headphone Mic=0x1a
[ 24.155756] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[ 24.164800] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[ 24.164993] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[ 24.165370] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
[ 24.165442] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
[ 24.165512] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
[ 24.179650] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 24.275928] uvcvideo 1-5:1.0: Found UVC 1.00 device Integrated_Webcam_HD (0c45:670c)
[ 24.407661] usbcore: registered new interface driver uvcvideo
[ 28.742536] rfkill: input handler disabled
[ 29.846423] wlp58s0: authenticate with 74:1a:e0:e7:b4:cc (local address=9c:b6:d0:d1:6a:b1)
[ 29.846431] wlp58s0: send auth to 74:1a:e0:e7:b4:cc (try 1/3)
[ 29.847770] wlp58s0: send auth to 74:1a:e0:e7:b4:cc (try 2/3)
[ 29.849037] wlp58s0: send auth to 74:1a:e0:e7:b4:cc (try 3/3)
[ 29.850360] wlp58s0: authentication with 74:1a:e0:e7:b4:cc timed out
[ 33.066683] ath10k_pci 0000:3a:00.0: timed out waiting peer stats info
[ 33.288677] wlp58s0: authenticate with 74:1a:e0:e7:b4:c8 (local address=9c:b6:d0:d1:6a:b1)
[ 33.288682] wlp58s0: send auth to 74:1a:e0:e7:b4:c8 (try 1/3)
[ 33.290507] wlp58s0: authenticated
[ 33.293970] wlp58s0: associate with 74:1a:e0:e7:b4:c8 (try 1/3)
[ 33.297990] wlp58s0: RX AssocResp from 74:1a:e0:e7:b4:c8 (capab=0x421 status=0 aid=4)
[ 33.300491] wlp58s0: associated
[ 33.300581] ath: EEPROM regdomain: 0x809c
[ 33.300583] ath: EEPROM indicates we should expect a country code
[ 33.300584] ath: doing EEPROM country->regdmn map search
[ 33.300585] ath: country maps to regdmn code: 0x52
[ 33.300587] ath: Country alpha2 being used: CN
[ 33.300589] ath: Regpair used: 0x52
[ 33.300590] ath: regdomain 0x809c dynamically updated by country element
[ 33.782447] rfkill: input handler enabled
[ 36.138627] rfkill: input handler disabled
[ 38.153378] SCSI subsystem initialized
[ 45.772892] usbcore: deregistering interface driver btusb
[ 46.040741] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030
[ 81.472582] warning: `telegram-deskto' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[ 293.474583] wlp58s0: deauthenticating from 74:1a:e0:e7:b4:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 293.477282] ath10k_pci 0000:3a:00.0: not found station for peer stats
[ 293.477286] ath10k_pci 0000:3a:00.0: failed to parse stats info tlv: -22
[ 302.825402] wlp58s0: authenticate with 74:1a:e0:e7:b4:cc (local address=9c:b6:d0:d1:6a:b1)
[ 302.825409] wlp58s0: send auth to 74:1a:e0:e7:b4:cc (try 1/3)
[ 302.826764] wlp58s0: send auth to 74:1a:e0:e7:b4:cc (try 2/3)
[ 302.828174] wlp58s0: send auth to 74:1a:e0:e7:b4:cc (try 3/3)
[ 302.829752] wlp58s0: authentication with 74:1a:e0:e7:b4:cc timed out
[ 305.938967] ath10k_pci 0000:3a:00.0: timed out waiting peer stats info
[ 306.341324] wlp58s0: authenticate with 74:1a:e0:e7:b4:c8 (local address=9c:b6:d0:d1:6a:b1)
[ 306.341342] wlp58s0: send auth to 74:1a:e0:e7:b4:c8 (try 1/3)
[ 306.345912] wlp58s0: authenticated
[ 306.350585] wlp58s0: associate with 74:1a:e0:e7:b4:c8 (try 1/3)
[ 306.354437] wlp58s0: RX AssocResp from 74:1a:e0:e7:b4:c8 (capab=0x421 status=0 aid=4)
[ 306.357039] wlp58s0: associated
[ 306.357122] ath: EEPROM regdomain: 0x809c
[ 306.357125] ath: EEPROM indicates we should expect a country code
[ 306.357127] ath: doing EEPROM country->regdmn map search
[ 306.357129] ath: country maps to regdmn code: 0x52
[ 306.357131] ath: Country alpha2 being used: CN
[ 306.357133] ath: Regpair used: 0x52
[ 306.357135] ath: regdomain 0x809c dynamically updated by country element
[ 7280.454613] wlp58s0: deauthenticating from 74:1a:e0:e7:b4:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 7280.494714] ath10k_pci 0000:3a:00.0: not found station for peer stats
[ 7280.494719] ath10k_pci 0000:3a:00.0: failed to parse stats info tlv: -22
[ 7285.592427] wlp58s0: authenticate with 62:47:d1:6c:d8:af (local address=9c:b6:d0:d1:6a:b1)
[ 7285.592456] wlp58s0: send auth to 62:47:d1:6c:d8:af (try 1/3)
[ 7285.598729] wlp58s0: authenticated
[ 7285.604484] wlp58s0: associate with 62:47:d1:6c:d8:af (try 1/3)
[ 7285.613598] wlp58s0: RX AssocResp from 62:47:d1:6c:d8:af (capab=0x1431 status=0 aid=1)
[ 7285.616957] wlp58s0: associated
[ 7377.355525] wlp58s0: deauthenticated from 62:47:d1:6c:d8:af (Reason: 3=DEAUTH_LEAVING)
[ 7377.447973] ath10k_pci 0000:3a:00.0: not found station for peer stats
[ 7377.447999] ath10k_pci 0000:3a:00.0: failed to parse stats info tlv: -22
[ 7382.482565] wlp58s0: authenticate with 62:47:d1:6c:d8:af (local address=9c:b6:d0:d1:6a:b1)
[ 7382.482582] wlp58s0: send auth to 62:47:d1:6c:d8:af (try 1/3)
[ 7382.487382] wlp58s0: send auth to 62:47:d1:6c:d8:af (try 2/3)
[ 7382.492157] wlp58s0: send auth to 62:47:d1:6c:d8:af (try 3/3)
[ 7382.496987] wlp58s0: authentication with 62:47:d1:6c:d8:af timed out
[ 7382.516945] ath10k_pci 0000:3a:00.0: not found station for peer stats
[ 7382.516958] ath10k_pci 0000:3a:00.0: failed to parse stats info tlv: -22
[ 7399.859262] wlp58s0: authenticate with 74:1a:e0:e7:b4:c8 (local address=9c:b6:d0:d1:6a:b1)
[ 7399.859270] wlp58s0: send auth to 74:1a:e0:e7:b4:c8 (try 1/3)
[ 7399.860956] wlp58s0: authenticated
[ 7399.863706] wlp58s0: associate with 74:1a:e0:e7:b4:c8 (try 1/3)
[ 7399.867553] wlp58s0: RX AssocResp from 74:1a:e0:e7:b4:c8 (capab=0x421 status=0 aid=1)
[ 7399.870166] wlp58s0: associated
[ 7399.870252] ath: EEPROM regdomain: 0x809c
[ 7399.870256] ath: EEPROM indicates we should expect a country code
[ 7399.870257] ath: doing EEPROM country->regdmn map search
[ 7399.870259] ath: country maps to regdmn code: 0x52
[ 7399.870260] ath: Country alpha2 being used: CN
[ 7399.870262] ath: Regpair used: 0x52
[ 7399.870263] ath: regdomain 0x809c dynamically updated by country element
[ 7399.912026] wlp58s0: deauthenticating from 74:1a:e0:e7:b4:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 7399.960015] ath10k_pci 0000:3a:00.0: not found station for peer stats
[ 7399.960038] ath10k_pci 0000:3a:00.0: failed to parse stats info tlv: -22
[ 7401.425114] PM: suspend entry (deep)
[ 7401.463438] Filesystems sync: 0.038 seconds
[ 7401.466228] Freezing user space processes
[ 7401.467669] Freezing user space processes completed (elapsed 0.001 seconds)
[ 7401.467673] OOM killer disabled.
[ 7401.467674] Freezing remaining freezable tasks
[ 7401.469002] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 7401.469054] printk: Suspending console(s) (use no_console_suspend to debug)
[ 7401.535117] pcieport 0000:00:1c.5: Intel SPT PCH root port ACS workaround enabled
[ 7401.995659] ACPI: EC: interrupt blocked
[ 7402.017706] ACPI: PM: Preparing to enter system sleep state S3
[ 7402.022724] ACPI: EC: event blocked
[ 7402.022726] ACPI: EC: EC stopped
[ 7402.022727] ACPI: PM: Saving platform NVS memory
[ 7402.024531] Disabling non-boot CPUs ...
[ 7402.026117] smpboot: CPU 3 is now offline
[ 7402.029706] smpboot: CPU 2 is now offline
[ 7402.032156] smpboot: CPU 1 is now offline
[ 7402.039574] ACPI: PM: Low-level resume complete
[ 7402.039618] ACPI: EC: EC started
[ 7402.039619] ACPI: PM: Restoring platform NVS memory
[ 7402.041755] Enabling non-boot CPUs ...
[ 7402.041788] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 7402.042538] CPU1 is up
[ 7402.042557] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 7402.043365] CPU2 is up
[ 7402.043384] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 7402.044113] CPU3 is up
[ 7402.046959] ACPI: PM: Waking up from system sleep state S3
[ 7402.074515] ACPI: EC: interrupt unblocked
[ 7402.074712] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
[ 7402.074723] pcieport 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled
[ 7402.074778] pcieport 0000:00:1c.5: Intel SPT PCH root port ACS workaround enabled
[ 7402.074788] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
[ 7402.102710] DMAR: DRHD: handling fault status reg 2
[ 7402.102719] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault index 0x0 [fault reason 0x25] Blocked a compatibility format interrupt request
[ 7402.104603] ACPI: EC: event unblocked
[ 7402.117684] nvme nvme0: 4/0/0 default/read/poll queues
[ 7402.346921] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[ 7402.362082] OOM killer enabled.
[ 7402.362083] Restarting tasks: Starting
[ 7402.362161] usb 1-3: USB disconnect, device number 2
[ 7402.371294] Restarting tasks: Done
[ 7402.371301] efivarfs: resyncing variable state
[ 7402.387277] efivarfs: finished resyncing variable state
[ 7402.387304] random: crng reseeded on system resumption
[ 7402.486817] usb 1-3: new full-speed USB device number 5 using xhci_hcd
[ 7402.514978] atkbd_receive_byte: 122 callbacks suppressed
[ 7402.514982] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 7402.563613] PM: suspend exit
[ 7402.628730] usb 1-3: New USB device found, idVendor=0cf3, idProduct=e300, bcdDevice= 0.01
[ 7402.628737] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7402.630379] usb 1-4: USB disconnect, device number 3
[ 7402.846645] usb 1-4: new full-speed USB device number 6 using xhci_hcd
[ 7402.988033] usb 1-4: New USB device found, idVendor=04f3, idProduct=2234, bcdDevice=11.11
[ 7402.988041] usb 1-4: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[ 7402.988044] usb 1-4: Product: Touchscreen
[ 7402.988046] usb 1-4: Manufacturer: ELAN
[ 7402.997289] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0003/input/input29
[ 7402.997396] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0003/input/input30
[ 7402.997447] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0003/input/input31
[ 7402.997552] hid-multitouch 0003:04F3:2234.0003: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0
[ 7402.997748] usb 1-5: USB disconnect, device number 4
[ 7403.126526] usb 1-5: new high-speed USB device number 7 using xhci_hcd
[ 7403.326991] usb 1-5: New USB device found, idVendor=0c45, idProduct=670c, bcdDevice=56.26
[ 7403.326998] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 7403.327000] usb 1-5: Product: Integrated_Webcam_HD
[ 7403.327002] usb 1-5: Manufacturer: CN09GTFMLOG008C8B7FWA01
[ 7403.337418] uvcvideo 1-5:1.0: Found UVC 1.00 device Integrated_Webcam_HD (0c45:670c)
[ 7403.538842] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[ 7403.584429] usbcore: registered new interface driver btusb
[ 7403.584766] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 7408.140293] wlp58s0: authenticate with 74:1a:e0:e7:b4:cc (local address=9c:b6:d0:d1:6a:b1)
[ 7408.140300] wlp58s0: send auth to 74:1a:e0:e7:b4:cc (try 1/3)
[ 7408.141588] wlp58s0: send auth to 74:1a:e0:e7:b4:cc (try 2/3)
[ 7408.142847] wlp58s0: send auth to 74:1a:e0:e7:b4:cc (try 3/3)
[ 7408.144128] wlp58s0: authentication with 74:1a:e0:e7:b4:cc timed out
[ 7411.198502] ath10k_pci 0000:3a:00.0: timed out waiting peer stats info
[ 7411.427655] wlp58s0: authenticate with 74:1a:e0:e7:b4:c8 (local address=9c:b6:d0:d1:6a:b1)
[ 7411.427673] wlp58s0: send auth to 74:1a:e0:e7:b4:c8 (try 1/3)
[ 7411.430953] wlp58s0: authenticated
[ 7411.434401] wlp58s0: associate with 74:1a:e0:e7:b4:c8 (try 1/3)
[ 7411.438371] wlp58s0: RX AssocResp from 74:1a:e0:e7:b4:c8 (capab=0x421 status=0 aid=1)
[ 7411.442569] wlp58s0: associated
[ 7411.442847] ath: EEPROM regdomain: 0x809c
[ 7411.442860] ath: EEPROM indicates we should expect a country code
[ 7411.442867] ath: doing EEPROM country->regdmn map search
[ 7411.442873] ath: country maps to regdmn code: 0x52
[ 7411.442881] ath: Country alpha2 being used: CN
[ 7411.442888] ath: Regpair used: 0x52
[ 7411.442894] ath: regdomain 0x809c dynamically updated by country element
[10196.527171] wlp58s0: deauthenticating from 74:1a:e0:e7:b4:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[10196.583102] ath10k_pci 0000:3a:00.0: not found station for peer stats
[10196.583107] ath10k_pci 0000:3a:00.0: failed to parse stats info tlv: -22
[10198.084042] PM: suspend entry (deep)
[10198.127824] Filesystems sync: 0.043 seconds
[10198.130872] Freezing user space processes
[10198.138831] Freezing user space processes completed (elapsed 0.007 seconds)
[10198.138834] OOM killer disabled.
[10198.138835] Freezing remaining freezable tasks
[10198.140092] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[10198.140120] printk: Suspending console(s) (use no_console_suspend to debug)
[10198.183269] pcieport 0000:00:1c.5: Intel SPT PCH root port ACS workaround enabled
[10198.651736] ACPI: EC: interrupt blocked
[10198.671250] ACPI: PM: Preparing to enter system sleep state S3
[10198.677990] ACPI: EC: event blocked
[10198.677992] ACPI: EC: EC stopped
[10198.677993] ACPI: PM: Saving platform NVS memory
[10198.680349] Disabling non-boot CPUs ...
[10198.682031] smpboot: CPU 3 is now offline
[10198.686097] smpboot: CPU 2 is now offline
[10198.689760] smpboot: CPU 1 is now offline
[10198.698586] ACPI: PM: Low-level resume complete
[10198.698632] ACPI: EC: EC started
[10198.698633] ACPI: PM: Restoring platform NVS memory
[10198.700762] Enabling non-boot CPUs ...
[10198.700795] smpboot: Booting Node 0 Processor 1 APIC 0x2
[10198.701552] CPU1 is up
[10198.701573] smpboot: Booting Node 0 Processor 2 APIC 0x1
[10198.702385] CPU2 is up
[10198.702404] smpboot: Booting Node 0 Processor 3 APIC 0x3
[10198.703144] CPU3 is up
[10198.706084] ACPI: PM: Waking up from system sleep state S3
[10198.733318] ACPI: EC: interrupt unblocked
[10198.733471] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
[10198.733635] pcieport 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled
[10198.733639] pcieport 0000:00:1c.5: Intel SPT PCH root port ACS workaround enabled
[10198.733650] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
[10198.746129] ACPI: EC: event unblocked
[10198.758855] nvme nvme0: 4/0/0 default/read/poll queues
[10198.967948] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[10199.025951] OOM killer enabled.
[10199.025953] Restarting tasks: Starting
[10199.026115] usb 1-3: USB disconnect, device number 5
[10199.027257] Restarting tasks: Done
[10199.027266] efivarfs: resyncing variable state
[10199.043990] efivarfs: finished resyncing variable state
[10199.044013] random: crng reseeded on system resumption
[10199.139451] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[10199.148002] usb 1-3: new full-speed USB device number 8 using xhci_hcd
[10199.203270] PM: suspend exit
[10199.290977] usb 1-3: New USB device found, idVendor=0cf3, idProduct=e300, bcdDevice= 0.01
[10199.290986] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[10199.296001] usb 1-4: USB disconnect, device number 6
[10199.296189] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[10199.296195] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[10199.520035] usb 1-4: new full-speed USB device number 9 using xhci_hcd
[10199.661922] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[10199.669958] usb 1-4: New USB device found, idVendor=04f3, idProduct=2234, bcdDevice=11.11
[10199.669967] usb 1-4: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[10199.669970] usb 1-4: Product: Touchscreen
[10199.669973] usb 1-4: Manufacturer: ELAN
[10199.682758] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0004/input/input34
[10199.682930] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0004/input/input35
[10199.683026] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0004/input/input36
[10199.683206] hid-multitouch 0003:04F3:2234.0004: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0
[10199.683366] usb 1-5: USB disconnect, device number 7
[10199.686737] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[10199.808069] usb 1-5: new high-speed USB device number 10 using xhci_hcd
[10200.011833] usb 1-5: New USB device found, idVendor=0c45, idProduct=670c, bcdDevice=56.26
[10200.011849] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[10200.011852] usb 1-5: Product: Integrated_Webcam_HD
[10200.011855] usb 1-5: Manufacturer: CN09GTFMLOG008C8B7FWA01
[10200.024142] uvcvideo 1-5:1.0: Found UVC 1.00 device Integrated_Webcam_HD (0c45:670c)
[10200.195749] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[10204.744059] systemd-sysv-generator[6900]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[10204.744069] systemd-sysv-generator[6900]: Please update package to include a native systemd unit file.
[10204.744073] systemd-sysv-generator[6900]: ! This compatibility logic is deprecated, expect removal soon. !
[10205.003450] wlp58s0: authenticate with a8:29:48:9d:a2:a0 (local address=9c:b6:d0:d1:6a:b1)
[10205.003456] wlp58s0: send auth to a8:29:48:9d:a2:a0 (try 1/3)
[10205.018685] wlp58s0: authenticated
[10205.020708] wlp58s0: associate with a8:29:48:9d:a2:a0 (try 1/3)
[10205.031483] wlp58s0: RX AssocResp from a8:29:48:9d:a2:a0 (capab=0xc21 status=0 aid=33)
[10205.034790] wlp58s0: associated
[10205.782741] systemd[1]: systemd 259.1-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE)
[10205.783003] systemd[1]: Detected architecture x86-64.
[10206.261290] systemd[1]: bpf-restrict-fs: LSM BPF program attached
[10206.311248] systemd-sysv-generator[7087]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[10206.311258] systemd-sysv-generator[7087]: Please update package to include a native systemd unit file.
[10206.311263] systemd-sysv-generator[7087]: ! This compatibility logic is deprecated, expect removal soon. !
[10207.149553] systemd-sysv-generator[7225]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[10207.149561] systemd-sysv-generator[7225]: Please update package to include a native systemd unit file.
[10207.149564] systemd-sysv-generator[7225]: ! This compatibility logic is deprecated, expect removal soon. !
[10207.569649] systemd-journald[501]: Received SIGTERM from PID 1 (systemd).
[10207.570110] systemd[1]: Stopping systemd-journald.service - Journal Service...
[10207.596885] systemd[1]: Started NetworkManager-dispatcher.service - Network Manager Script Dispatcher Service.
[10207.614509] systemd[1]: systemd-journald.service: Deactivated successfully.
[10207.614891] systemd[1]: Stopped systemd-journald.service - Journal Service.
[10207.614965] systemd[1]: systemd-journald.service: Consumed 1.025s CPU time over 2h 49min 47.520s wall clock time, 30.7M memory peak.
[10207.633846] systemd[1]: Starting systemd-journald.service - Journal Service...
[10207.698006] systemd-journald[7246]: Collecting audit messages is disabled.
[10207.730374] systemd[1]: Started systemd-journald.service - Journal Service.
[10208.805055] systemd-sysv-generator[7411]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[10208.805065] systemd-sysv-generator[7411]: Please update package to include a native systemd unit file.
[10208.805070] systemd-sysv-generator[7411]: ! This compatibility logic is deprecated, expect removal soon. !
[10211.069450] systemd-sysv-generator[7578]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[10211.069461] systemd-sysv-generator[7578]: Please update package to include a native systemd unit file.
[10211.069466] systemd-sysv-generator[7578]: ! This compatibility logic is deprecated, expect removal soon. !
[10214.919298] systemd-sysv-generator[7750]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[10214.919309] systemd-sysv-generator[7750]: Please update package to include a native systemd unit file.
[10214.919314] systemd-sysv-generator[7750]: ! This compatibility logic is deprecated, expect removal soon. !
[10215.708360] systemd-sysv-generator[7895]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[10215.708368] systemd-sysv-generator[7895]: Please update package to include a native systemd unit file.
[10215.708372] systemd-sysv-generator[7895]: ! This compatibility logic is deprecated, expect removal soon. !
[10216.720978] systemd-sysv-generator[8048]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[10216.720986] systemd-sysv-generator[8048]: Please update package to include a native systemd unit file.
[10216.720990] systemd-sysv-generator[8048]: ! This compatibility logic is deprecated, expect removal soon. !
[10217.396322] systemd-sysv-generator[8189]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[10217.396332] systemd-sysv-generator[8189]: Please update package to include a native systemd unit file.
[10217.396336] systemd-sysv-generator[8189]: ! This compatibility logic is deprecated, expect removal soon. !
[10218.006295] systemd-sysv-generator[8332]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[10218.006301] systemd-sysv-generator[8332]: Please update package to include a native systemd unit file.
[10218.006304] systemd-sysv-generator[8332]: ! This compatibility logic is deprecated, expect removal soon. !
[10581.286447] wlp58s0: Connection to AP a8:29:48:9d:a2:a0 lost
[10581.346706] ath10k_pci 0000:3a:00.0: not found station for peer stats
[10581.346715] ath10k_pci 0000:3a:00.0: failed to parse stats info tlv: -22
[10581.586906] wlp58s0: authenticate with 1c:18:4a:02:49:b0 (local address=9c:b6:d0:d1:6a:b1)
[10581.586915] wlp58s0: send auth to 1c:18:4a:02:49:b0 (try 1/3)
[10581.588776] wlp58s0: authenticated
[10581.590444] wlp58s0: associate with 1c:18:4a:02:49:b0 (try 1/3)
[10581.593199] wlp58s0: RX AssocResp from 1c:18:4a:02:49:b0 (capab=0x401 status=0 aid=3)
[10581.598871] wlp58s0: associated
[10581.599043] ath: EEPROM regdomain: 0x809c
[10581.599047] ath: EEPROM indicates we should expect a country code
[10581.599049] ath: doing EEPROM country->regdmn map search
[10581.599050] ath: country maps to regdmn code: 0x52
[10581.599052] ath: Country alpha2 being used: CN
[10581.599054] ath: Regpair used: 0x52
[10581.599056] ath: regdomain 0x809c dynamically updated by country element
[10615.894668] wlp58s0: disconnect from AP 1c:18:4a:02:49:b0 for new auth to a8:29:48:9d:a2:a0
[10615.952869] ath10k_pci 0000:3a:00.0: not found station for peer stats
[10615.952877] ath10k_pci 0000:3a:00.0: failed to parse stats info tlv: -22
[10616.016970] wlp58s0: authenticate with a8:29:48:9d:a2:a0 (local address=9c:b6:d0:d1:6a:b1)
[10616.016983] wlp58s0: send auth to a8:29:48:9d:a2:a0 (try 1/3)
[10616.035887] wlp58s0: authenticated
[10616.036468] wlp58s0: associate with a8:29:48:9d:a2:a0 (try 1/3)
[10616.049331] wlp58s0: RX ReassocResp from a8:29:48:9d:a2:a0 (capab=0xc21 status=0 aid=37)
[10616.052876] wlp58s0: associated
[10653.968050] wlp58s0: deauthenticating from a8:29:48:9d:a2:a0 by local choice (Reason: 3=DEAUTH_LEAVING)
[10654.023176] ath10k_pci 0000:3a:00.0: not found station for peer stats
[10654.023185] ath10k_pci 0000:3a:00.0: failed to parse stats info tlv: -22
[10655.914725] PM: suspend entry (deep)
[10655.962717] Filesystems sync: 0.047 seconds
[10655.971036] Freezing user space processes
[10655.973045] Freezing user space processes completed (elapsed 0.002 seconds)
[10655.973051] OOM killer disabled.
[10655.973052] Freezing remaining freezable tasks
[10655.974625] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[10655.974690] printk: Suspending console(s) (use no_console_suspend to debug)
[10656.027353] pcieport 0000:00:1c.5: Intel SPT PCH root port ACS workaround enabled
[10656.472400] ACPI: EC: interrupt blocked
[10656.495184] ACPI: PM: Preparing to enter system sleep state S3
[10656.504716] ACPI: EC: event blocked
[10656.504721] ACPI: EC: EC stopped
[10656.504723] ACPI: PM: Saving platform NVS memory
[10656.507998] Disabling non-boot CPUs ...
[10656.511287] smpboot: CPU 3 is now offline
[10656.518348] smpboot: CPU 2 is now offline
[10656.522784] smpboot: CPU 1 is now offline
[10656.532089] ACPI: PM: Low-level resume complete
[10656.532132] ACPI: EC: EC started
[10656.532132] ACPI: PM: Restoring platform NVS memory
[10656.534258] Enabling non-boot CPUs ...
[10656.534293] smpboot: Booting Node 0 Processor 1 APIC 0x2
[10656.535126] CPU1 is up
[10656.535146] smpboot: Booting Node 0 Processor 2 APIC 0x1
[10656.536000] CPU2 is up
[10656.536018] smpboot: Booting Node 0 Processor 3 APIC 0x3
[10656.536763] CPU3 is up
[10656.539601] ACPI: PM: Waking up from system sleep state S3
[10656.566509] ACPI: EC: interrupt unblocked
[10656.566740] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
[10656.566771] pcieport 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled
[10656.566772] pcieport 0000:00:1c.5: Intel SPT PCH root port ACS workaround enabled
[10656.567090] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
[10656.617107] ACPI: EC: event unblocked
[10656.629825] nvme nvme0: 4/0/0 default/read/poll queues
[10656.845785] OOM killer enabled.
[10656.845788] Restarting tasks: Starting
[10656.846003] usb 1-3: USB disconnect, device number 8
[10656.846877] Restarting tasks: Done
[10656.846886] efivarfs: resyncing variable state
[10656.863697] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[10656.873681] efivarfs: finished resyncing variable state
[10656.873721] random: crng reseeded on system resumption
[10656.971711] usb 1-3: new full-speed USB device number 11 using xhci_hcd
[10657.029475] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[10657.109237] usb 1-3: New USB device found, idVendor=0cf3, idProduct=e300, bcdDevice= 0.01
[10657.109256] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[10657.185160] PM: suspend exit
[10657.186588] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[10657.186599] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[10657.197848] usb 1-4: USB disconnect, device number 9
[10657.403841] usb 1-4: new full-speed USB device number 12 using xhci_hcd
[10657.541643] usb 1-4: New USB device found, idVendor=04f3, idProduct=2234, bcdDevice=11.11
[10657.541651] usb 1-4: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[10657.541654] usb 1-4: Product: Touchscreen
[10657.541656] usb 1-4: Manufacturer: ELAN
[10657.544666] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[10657.557055] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0005/input/input39
[10657.557647] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0005/input/input40
[10657.557738] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0005/input/input41
[10657.558193] hid-multitouch 0003:04F3:2234.0005: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0
[10657.558442] usb 1-5: USB disconnect, device number 10
[10657.571905] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[10657.681340] usb 1-5: new high-speed USB device number 13 using xhci_hcd
[10657.881617] usb 1-5: New USB device found, idVendor=0c45, idProduct=670c, bcdDevice=56.26
[10657.881632] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[10657.881636] usb 1-5: Product: Integrated_Webcam_HD
[10657.881639] usb 1-5: Manufacturer: CN09GTFMLOG008C8B7FWA01
[10657.889519] uvcvideo 1-5:1.0: Found UVC 1.00 device Integrated_Webcam_HD (0c45:670c)
[10658.030969] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[10715.808972] usbcore: deregistering interface driver btusb
[10773.553133] usb 1-2: new high-speed USB device number 14 using xhci_hcd
[10773.690185] usb 1-2: New USB device found, idVendor=0fce, idProduct=0201, bcdDevice= 4.04
[10773.690202] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[10773.690209] usb 1-2: Product: I4113
[10773.690214] usb 1-2: Manufacturer: Sony
[10773.690219] usb 1-2: SerialNumber: CQ30020CYQ
[10778.338358] usb 1-2: USB disconnect, device number 14
[10778.724486] usb 1-2: new high-speed USB device number 15 using xhci_hcd
[10778.862783] usb 1-2: New USB device found, idVendor=0fce, idProduct=0201, bcdDevice= 4.04
[10778.862791] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[10778.862794] usb 1-2: Product: I4113
[10778.862796] usb 1-2: Manufacturer: Sony
[10778.862798] usb 1-2: SerialNumber: CQ30020CYQ
[11110.417551] usb 1-2: reset high-speed USB device number 15 using xhci_hcd
[11111.010403] usb 1-2: USB disconnect, device number 15
[13571.638958] PM: suspend entry (deep)
[13571.652965] Filesystems sync: 0.013 seconds
[13571.657507] Freezing user space processes
[13571.659417] Freezing user space processes completed (elapsed 0.001 seconds)
[13571.659422] OOM killer disabled.
[13571.659423] Freezing remaining freezable tasks
[13571.660933] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[13571.660985] printk: Suspending console(s) (use no_console_suspend to debug)
[13571.717844] pcieport 0000:00:1c.5: Intel SPT PCH root port ACS workaround enabled
[13572.168239] ACPI: EC: interrupt blocked
[13572.189949] ACPI: PM: Preparing to enter system sleep state S3
[13572.199571] ACPI: EC: event blocked
[13572.199576] ACPI: EC: EC stopped
[13572.199579] ACPI: PM: Saving platform NVS memory
[13572.202936] Disabling non-boot CPUs ...
[13572.205148] smpboot: CPU 3 is now offline
[13572.210509] smpboot: CPU 2 is now offline
[13572.214743] smpboot: CPU 1 is now offline
[13572.221108] ACPI: PM: Low-level resume complete
[13572.221152] ACPI: EC: EC started
[13572.221153] ACPI: PM: Restoring platform NVS memory
[13572.223290] Enabling non-boot CPUs ...
[13572.223322] smpboot: Booting Node 0 Processor 1 APIC 0x2
[13572.224101] CPU1 is up
[13572.224121] smpboot: Booting Node 0 Processor 2 APIC 0x1
[13572.224975] CPU2 is up
[13572.224994] smpboot: Booting Node 0 Processor 3 APIC 0x3
[13572.225741] CPU3 is up
[13572.228594] ACPI: PM: Waking up from system sleep state S3
[13572.255132] ACPI: EC: interrupt unblocked
[13572.255379] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
[13572.255398] pcieport 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled
[13572.255403] pcieport 0000:00:1c.5: Intel SPT PCH root port ACS workaround enabled
[13572.255727] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
[13572.300133] DMAR: DRHD: handling fault status reg 2
[13572.300142] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault index 0x0 [fault reason 0x25] Blocked a compatibility format interrupt request
[13572.302127] ACPI: EC: event unblocked
[13572.314761] nvme nvme0: 4/0/0 default/read/poll queues
[13572.548370] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[13572.781923] OOM killer enabled.
[13572.781925] Restarting tasks: Starting
[13572.782165] usb 1-3: USB disconnect, device number 11
[13572.783569] Restarting tasks: Done
[13572.783578] efivarfs: resyncing variable state
[13572.809718] efivarfs: finished resyncing variable state
[13572.809749] random: crng reseeded on system resumption
[13572.865604] PM: suspend exit
[13572.908458] usb 1-3: new full-speed USB device number 16 using xhci_hcd
[13573.049945] usb 1-3: New USB device found, idVendor=0cf3, idProduct=e300, bcdDevice= 0.01
[13573.049955] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[13573.051923] usb 1-4: USB disconnect, device number 12
[13573.264443] usb 1-4: new full-speed USB device number 17 using xhci_hcd
[13573.406090] usb 1-4: New USB device found, idVendor=04f3, idProduct=2234, bcdDevice=11.11
[13573.406100] usb 1-4: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[13573.406105] usb 1-4: Product: Touchscreen
[13573.406109] usb 1-4: Manufacturer: ELAN
[13573.416162] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0006/input/input44
[13573.416346] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0006/input/input45
[13573.416487] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0006/input/input46
[13573.416786] hid-multitouch 0003:04F3:2234.0006: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0
[13573.416954] usb 1-5: USB disconnect, device number 13
[13573.544478] usb 1-5: new high-speed USB device number 18 using xhci_hcd
[13573.725758] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[13573.749005] usb 1-5: New USB device found, idVendor=0c45, idProduct=670c, bcdDevice=56.26
[13573.749016] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[13573.749028] usb 1-5: Product: Integrated_Webcam_HD
[13573.749032] usb 1-5: Manufacturer: CN09GTFMLOG008C8B7FWA01
[13573.757751] uvcvideo 1-5:1.0: Found UVC 1.00 device Integrated_Webcam_HD (0c45:670c)
[13574.160229] usbcore: registered new interface driver btusb
[13574.161424] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[13574.161432] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[13574.520339] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[13574.542325] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[13683.702520] usbcore: deregistering interface driver btusb
[17958.492826] PM: suspend entry (deep)
[17958.534063] Filesystems sync: 0.041 seconds
[17958.542736] Freezing user space processes
[17958.545448] Freezing user space processes completed (elapsed 0.002 seconds)
[17958.545459] OOM killer disabled.
[17958.545463] Freezing remaining freezable tasks
[17958.547396] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[17958.547509] printk: Suspending console(s) (use no_console_suspend to debug)
[17958.609269] pcieport 0000:00:1c.5: Intel SPT PCH root port ACS workaround enabled
[17959.065396] ACPI: EC: interrupt blocked
[17959.085306] ACPI: PM: Preparing to enter system sleep state S3
[17959.094789] ACPI: EC: event blocked
[17959.094794] ACPI: EC: EC stopped
[17959.094796] ACPI: PM: Saving platform NVS memory
[17959.098115] Disabling non-boot CPUs ...
[17959.100336] smpboot: CPU 3 is now offline
[17959.106665] smpboot: CPU 2 is now offline
[17959.111370] smpboot: CPU 1 is now offline
[17959.118417] ACPI: PM: Low-level resume complete
[17959.118460] ACPI: EC: EC started
[17959.118461] ACPI: PM: Restoring platform NVS memory
[17959.120598] Enabling non-boot CPUs ...
[17959.120633] smpboot: Booting Node 0 Processor 1 APIC 0x2
[17959.121417] CPU1 is up
[17959.121437] smpboot: Booting Node 0 Processor 2 APIC 0x1
[17959.122283] CPU2 is up
[17959.122302] smpboot: Booting Node 0 Processor 3 APIC 0x3
[17959.123051] CPU3 is up
[17959.125904] ACPI: PM: Waking up from system sleep state S3
[17959.154557] ACPI: EC: interrupt unblocked
[17959.154765] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
[17959.154777] pcieport 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled
[17959.154781] pcieport 0000:00:1c.5: Intel SPT PCH root port ACS workaround enabled
[17959.155069] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
[17959.187901] DMAR: DRHD: handling fault status reg 2
[17959.187908] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault index 0x0 [fault reason 0x25] Blocked a compatibility format interrupt request
[17959.189315] ACPI: EC: event unblocked
[17959.197876] DMAR: DRHD: handling fault status reg 2
[17959.197882] DMAR: [DMA Write NO_PASID] Request device [3c:00.0] fault addr 0x0 [fault reason 0x05] PTE Write access is not set
[17959.198366] DMAR: DRHD: handling fault status reg 2
[17959.198369] DMAR: [DMA Write NO_PASID] Request device [3c:00.0] fault addr 0x0 [fault reason 0x05] PTE Write access is not set
[17959.198923] DMAR: DRHD: handling fault status reg 2
[17959.201477] nvme nvme0: 4/0/0 default/read/poll queues
[17959.304908] OOM killer enabled.
[17959.304911] Restarting tasks: Starting
[17959.305098] usb 1-3: USB disconnect, device number 16
[17959.305845] Restarting tasks: Done
[17959.305856] efivarfs: resyncing variable state
[17959.323931] efivarfs: finished resyncing variable state
[17959.323964] random: crng reseeded on system resumption
[17959.423774] usb 1-3: new full-speed USB device number 19 using xhci_hcd
[17959.443833] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[17959.561178] usb 1-3: New USB device found, idVendor=0cf3, idProduct=e300, bcdDevice= 0.01
[17959.561191] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[17959.563617] usb 1-4: USB disconnect, device number 17
[17959.613091] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[17959.718449] PM: suspend exit
[17959.755839] usb 1-4: new full-speed USB device number 20 using xhci_hcd
[17959.897388] usb 1-4: New USB device found, idVendor=04f3, idProduct=2234, bcdDevice=11.11
[17959.897396] usb 1-4: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[17959.897399] usb 1-4: Product: Touchscreen
[17959.897402] usb 1-4: Manufacturer: ELAN
[17960.010946] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0007/input/input49
[17960.014448] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0007/input/input50
[17960.014897] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0007/input/input51
[17960.015112] hid-multitouch 0003:04F3:2234.0007: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0
[17960.015530] usb 1-5: USB disconnect, device number 18
[17960.147826] usb 1-5: new high-speed USB device number 21 using xhci_hcd
[17960.348431] usb 1-5: New USB device found, idVendor=0c45, idProduct=670c, bcdDevice=56.26
[17960.348439] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[17960.348442] usb 1-5: Product: Integrated_Webcam_HD
[17960.348452] usb 1-5: Manufacturer: CN09GTFMLOG008C8B7FWA01
[17960.357147] uvcvideo 1-5:1.0: Found UVC 1.00 device Integrated_Webcam_HD (0c45:670c)
[17960.631967] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[17961.358863] usbcore: registered new interface driver btusb
[17961.366016] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[17961.366041] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[17961.724990] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[17961.749922] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[18006.830173] usbcore: deregistering interface driver btusb
[18023.855825] dmar_fault: 38 callbacks suppressed
[18023.855841] DMAR: DRHD: handling fault status reg 2
[18023.855857] DMAR: [DMA Write NO_PASID] Request device [3c:00.0] fault addr 0x0 [fault reason 0x05] PTE Write access is not set
[18023.861027] DMAR: DRHD: handling fault status reg 2
[18023.861056] DMAR: [DMA Write NO_PASID] Request device [3c:00.0] fault addr 0x0 [fault reason 0x05] PTE Write access is not set
[18023.862097] DMAR: DRHD: handling fault status reg 2
[18023.862122] DMAR: [DMA Write NO_PASID] Request device [3c:00.0] fault addr 0x0 [fault reason 0x05] PTE Write access is not set
[18605.522956] DMAR: DRHD: handling fault status reg 2
[18605.522964] DMAR: [DMA Write NO_PASID] Request device [3c:00.0] fault addr 0x0 [fault reason 0x05] PTE Write access is not set
[18605.523812] DMAR: DRHD: handling fault status reg 2
[18605.523816] DMAR: [DMA Write NO_PASID] Request device [3c:00.0] fault addr 0x0 [fault reason 0x05] PTE Write access is not set
[18623.937446] DMAR: DRHD: handling fault status reg 2
[18623.937470] DMAR: [DMA Write NO_PASID] Request device [3c:00.0] fault addr 0x0 [fault reason 0x05] PTE Write access is not set
[18623.944171] DMAR: DRHD: handling fault status reg 2
[18623.944197] DMAR: [DMA Write NO_PASID] Request device [3c:00.0] fault addr 0x0 [fault reason 0x05] PTE Write access is not set
[18623.945756] DMAR: DRHD: handling fault status reg 2
[18623.945783] DMAR: [DMA Write NO_PASID] Request device [3c:00.0] fault addr 0x0 [fault reason 0x05] PTE Write access is not set
[19223.937461] DMAR: DRHD: handling fault status reg 2
[19223.937486] DMAR: [DMA Write NO_PASID] Request device [3c:00.0] fault addr 0x0 [fault reason 0x05] PTE Write access is not set
[19223.944963] DMAR: DRHD: handling fault status reg 2
[19223.944988] DMAR: [DMA Write NO_PASID] Request device [3c:00.0] fault addr 0x0 [fault reason 0x05] PTE Write access is not set
[19223.945984] DMAR: DRHD: handling fault status reg 2
[19223.946005] DMAR: [DMA Write NO_PASID] Request device [3c:00.0] fault addr 0x0 [fault reason 0x05] PTE Write access is not set
[19567.604273] DMAR: DRHD: handling fault status reg 2
[19567.604300] DMAR: [DMA Write NO_PASID] Request device [3c:00.0] fault addr 0x0 [fault reason 0x05] PTE Write access is not set
[19567.605235] DMAR: DRHD: handling fault status reg 2
[19567.605258] DMAR: [DMA Write NO_PASID] Request device [3c:00.0] fault addr 0x0 [fault reason 0x05] PTE Write access is not set
[19639.184011] pcieport 0000:00:1c.5: Intel SPT PCH root port ACS workaround enabled
[19824.050807] DMAR: DRHD: handling fault status reg 2
[19824.050836] DMAR: [DMA Write NO_PASID] Request device [3c:00.0] fault addr 0x0 [fault reason 0x05] PTE Write access is not set
[19824.055895] DMAR: DRHD: handling fault status reg 2
[19824.055914] DMAR: [DMA Write NO_PASID] Request device [3c:00.0] fault addr 0x0 [fault reason 0x05] PTE Write access is not set
[19824.056876] DMAR: DRHD: handling fault status reg 2
[19824.056891] DMAR: [DMA Write NO_PASID] Request device [3c:00.0] fault addr 0x0 [fault reason 0x05] PTE Write access is not set
[20393.446173] PM: suspend entry (deep)
[20393.460849] Filesystems sync: 0.014 seconds
[20393.463914] Freezing user space processes
[20393.465630] Freezing user space processes completed (elapsed 0.001 seconds)
[20393.465635] OOM killer disabled.
[20393.465636] Freezing remaining freezable tasks
[20393.466495] Freezing remaining freezable tasks completed (elapsed 0.000 seconds)
[20393.466545] printk: Suspending console(s) (use no_console_suspend to debug)
[20393.518410] pcieport 0000:00:1c.5: Intel SPT PCH root port ACS workaround enabled
[20393.547195] DMAR: DRHD: handling fault status reg 2
[20393.547209] DMAR: [DMA Write NO_PASID] Request device [3c:00.0] fault addr 0x0 [fault reason 0x05] PTE Write access is not set
[20393.547462] DMAR: DRHD: handling fault status reg 2
[20393.547474] DMAR: [DMA Write NO_PASID] Request device [3c:00.0] fault addr 0x0 [fault reason 0x05] PTE Write access is not set
[20393.547727] DMAR: DRHD: handling fault status reg 2
[20393.547734] DMAR: [DMA Write NO_PASID] Request device [3c:00.0] fault addr 0x0 [fault reason 0x05] PTE Write access is not set
[20393.548038] DMAR: DRHD: handling fault status reg 2
[20393.980643] ACPI: EC: interrupt blocked
[20394.002396] ACPI: PM: Preparing to enter system sleep state S3
[20394.011895] ACPI: EC: event blocked
[20394.011900] ACPI: EC: EC stopped
[20394.011902] ACPI: PM: Saving platform NVS memory
[20394.015190] Disabling non-boot CPUs ...
[20394.018492] smpboot: CPU 3 is now offline
[20394.023535] smpboot: CPU 2 is now offline
[20394.027372] smpboot: CPU 1 is now offline
[20394.033522] ACPI: PM: Low-level resume complete
[20394.033565] ACPI: EC: EC started
[20394.033566] ACPI: PM: Restoring platform NVS memory
[20394.035711] Enabling non-boot CPUs ...
[20394.035743] smpboot: Booting Node 0 Processor 1 APIC 0x2
[20394.036521] CPU1 is up
[20394.036541] smpboot: Booting Node 0 Processor 2 APIC 0x1
[20394.037433] CPU2 is up
[20394.037454] smpboot: Booting Node 0 Processor 3 APIC 0x3
[20394.038220] CPU3 is up
[20394.041072] ACPI: PM: Waking up from system sleep state S3
[20394.071102] ACPI: EC: interrupt unblocked
[20394.071364] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
[20394.071380] pcieport 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled
[20394.071385] pcieport 0000:00:1c.5: Intel SPT PCH root port ACS workaround enabled
[20394.071734] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
[20394.134900] ACPI: EC: event unblocked
[20394.148413] nvme nvme0: 4/0/0 default/read/poll queues
[20394.400832] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[20394.573318] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[20394.578463] OOM killer enabled.
[20394.578729] Restarting tasks: Starting
[20394.578893] usb 1-3: USB disconnect, device number 19
[20394.591941] Restarting tasks: Done
[20394.591955] efivarfs: resyncing variable state
[20394.633108] efivarfs: finished resyncing variable state
[20394.633172] random: crng reseeded on system resumption
[20394.696920] usb 1-3: new full-speed USB device number 22 using xhci_hcd
[20394.739729] PM: suspend exit
[20394.838356] usb 1-3: New USB device found, idVendor=0cf3, idProduct=e300, bcdDevice= 0.01
[20394.838373] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[20394.846327] usb 1-4: USB disconnect, device number 20
[20395.044913] usb 1-4: new full-speed USB device number 23 using xhci_hcd
[20395.182594] usb 1-4: New USB device found, idVendor=04f3, idProduct=2234, bcdDevice=11.11
[20395.182601] usb 1-4: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[20395.182604] usb 1-4: Product: Touchscreen
[20395.182606] usb 1-4: Manufacturer: ELAN
[20395.197109] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0008/input/input54
[20395.197354] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0008/input/input55
[20395.197475] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0008/input/input56
[20395.197722] hid-multitouch 0003:04F3:2234.0008: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0
[20395.197916] usb 1-5: USB disconnect, device number 21
[20395.320996] usb 1-5: new high-speed USB device number 24 using xhci_hcd
[20395.524963] usb 1-5: New USB device found, idVendor=0c45, idProduct=670c, bcdDevice=56.26
[20395.524979] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[20395.524994] usb 1-5: Product: Integrated_Webcam_HD
[20395.524999] usb 1-5: Manufacturer: CN09GTFMLOG008C8B7FWA01
[20395.533623] uvcvideo 1-5:1.0: Found UVC 1.00 device Integrated_Webcam_HD (0c45:670c)
[20395.542235] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[20396.034946] usbcore: registered new interface driver btusb
[20396.044144] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[20396.044158] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[20396.405536] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[20396.430858] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[20441.100304] wlp58s0: authenticate with d4:78:9b:df:34:70 (local address=9c:b6:d0:d1:6a:b1)
[20441.100370] wlp58s0: send auth to d4:78:9b:df:34:70 (try 1/3)
[20441.101687] wlp58s0: authenticated
[20441.104428] wlp58s0: associate with d4:78:9b:df:34:70 (try 1/3)
[20441.106066] wlp58s0: RX AssocResp from d4:78:9b:df:34:70 (capab=0x101 status=0 aid=7)
[20441.109092] wlp58s0: associated
[20441.250571] usbcore: deregistering interface driver btusb
[20570.097083] audit: type=1400 audit(1770481371.042:134): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince" pid=23259 comm="apparmor_parser"
[20570.112630] audit: type=1400 audit(1770481371.058:135): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=23259 comm="apparmor_parser"
[20570.120269] audit: type=1400 audit(1770481371.066:136): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince//snap_browsers" pid=23259 comm="apparmor_parser"
[20570.146396] audit: type=1400 audit(1770481371.094:137): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-previewer" pid=23259 comm="apparmor_parser"
[20570.156113] audit: type=1400 audit(1770481371.102:138): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=23259 comm="apparmor_parser"
[20570.164430] audit: type=1400 audit(1770481371.110:139): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=23259 comm="apparmor_parser"
[21937.443555] sctp: Hash tables configured (bind 256/256)
More information about the Linux-nvme
mailing list