[PATCH v2 2/2] nvme-pci: Add debug message on fail to read CSTS

[John Garry]

On 22/10/2025 11:33, Gerd Bayer wrote:
> Add a debug log spelling out that reading the CSTS register failed - to
> distinguish this from other reasons for ENODEV.
> 
> Reviewed-by: Wilfred Mallawa <wilfred.mallawa at wdc.com>
> Reviewed-by: Chaitanya Kulkarni <kch at nvidia.com>
> Signed-off-by: Gerd Bayer <gbayer at linux.ibm.com>
> ---
>   drivers/nvme/host/pci.c | 1 +
>   1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
> index 8c624960c9f67e0cc8409023de5e532d6ed9b3ac..ce563e93d29443a25e9236d0b6d8152ee85796d7 100644
> --- a/drivers/nvme/host/pci.c
> +++ b/drivers/nvme/host/pci.c
> @@ -2906,6 +2906,7 @@ static int nvme_pci_enable(struct nvme_dev *dev)
>   	pci_set_master(pdev);
>   
>   	if (readl(dev->bar + NVME_REG_CSTS) == -1) {
> +		dev_dbg(dev->ctrl.device, "reading CSTS register failed");

we should add "\n" as a good practice, no?

>   		result = -ENODEV;
>   		goto disable;
>   	}
>