[PATCH v2 2/3] nvme: prevent admin controller from smart log fetch (LID 2)

[Kamaljit Singh]

Similar to a discovery ctrl, prevent an admin-ctrl from getting a smart
log. LID 2 is optional for admin controllers to support.

In the future when support for the newly added LID=0 (supported log
pages) is added, GLP accesses can be made smarter by basing such calls
on response from LID=0 reads.

Reference: NVMe Base rev 2.2, sec 3.1.3.5, fig 31.

Signed-off-by: Kamaljit Singh <kamaljit.singh1 at wdc.com>
---
 drivers/nvme/host/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index a1155fb8d5be..c310634e75f3 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -3705,7 +3705,7 @@ int nvme_init_ctrl_finish(struct nvme_ctrl *ctrl, bool was_suspended)
 
 	nvme_configure_opal(ctrl, was_suspended);
 
-	if (!ctrl->identified && !nvme_discovery_ctrl(ctrl)) {
+	if (!ctrl->identified && !nvme_discovery_ctrl(ctrl) && !nvme_admin_ctrl(ctrl)) {
 		/*
 		 * Do not return errors unless we are in a controller reset,
 		 * the controller works perfectly fine without hwmon.
-- 
2.43.0