nvmetcli restore fails in add_subsystem

[Daniel Wagner]

On Wed, Apr 09, 2025 at 02:58:17PM +0300, Anton Gavriliuk wrote:
> The link - https://documentation.suse.com/sles/15-SP6/html/SLES-all/cha-nvmeof.html
> 
> is quite confused me,
>
> 17.4.3 Marvell
> 
> FC-NVMe is supported on QLE269x and QLE27xx adapters. FC-NVMe support
> is enabled by default in the Marvell® QLogic® QLA2xxx Fibre Channel
> driver.

I think this paragraph only talks about the host side support.

> So if "the qla2xxx driver or/and the HBA firmware do not support the
> target mode anymore.", it is not clear, will NVMe/FC target work with
> QLE269x and QLE27xx adapters or not.

Let me back paddle a bit. My failed attempt (or that one from my
colleague) might just be a bad combination of driver/HBA. Without asking
Marvell directly it's not clear what the status is.