[PATCH v8 3/4] driver core: shut down devices asynchronously
stuart hayes
stuart.w.hayes at gmail.com
Tue Sep 10 17:14:46 PDT 2024
On 9/8/2024 8:36 AM, Jan Kiszka wrote:
> On 22.08.24 22:28, Stuart Hayes wrote:
>> Add code to allow asynchronous shutdown of devices, ensuring that each
>> device is shut down before its parents & suppliers.
>>
>> Only devices with drivers that have async_shutdown_enable enabled will be
>> shut down asynchronously.
>>
>> This can dramatically reduce system shutdown/reboot time on systems that
>> have multiple devices that take many seconds to shut down (like certain
>> NVMe drives). On one system tested, the shutdown time went from 11 minutes
>> without this patch to 55 seconds with the patch.
>>
>> Signed-off-by: Stuart Hayes <stuart.w.hayes at gmail.com>
>> Signed-off-by: David Jeffery <djeffery at redhat.com>
>> ---
>> drivers/base/base.h | 4 +++
>> drivers/base/core.c | 54 ++++++++++++++++++++++++++++++++++-
>> include/linux/device/driver.h | 2 ++
>> 3 files changed, 59 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/base/base.h b/drivers/base/base.h
>> index 0b53593372d7..aa5a2bd3f2b8 100644
>> --- a/drivers/base/base.h
>> +++ b/drivers/base/base.h
>> @@ -10,6 +10,7 @@
>> * shared outside of the drivers/base/ directory.
>> *
>> */
>> +#include <linux/async.h>
>> #include <linux/notifier.h>
>>
>> /**
>> @@ -97,6 +98,8 @@ struct driver_private {
>> * the device; typically because it depends on another driver getting
>> * probed first.
>> * @async_driver - pointer to device driver awaiting probe via async_probe
>> + * @shutdown_after - used during device shutdown to ensure correct shutdown
>> + * ordering.
>> * @device - pointer back to the struct device that this structure is
>> * associated with.
>> * @dead - This device is currently either in the process of or has been
>> @@ -114,6 +117,7 @@ struct device_private {
>> struct list_head deferred_probe;
>> const struct device_driver *async_driver;
>> char *deferred_probe_reason;
>> + async_cookie_t shutdown_after;
>> struct device *device;
>> u8 dead:1;
>> };
>> diff --git a/drivers/base/core.c b/drivers/base/core.c
>> index 7e50daa65ca0..dd3652ea56fe 100644
>> --- a/drivers/base/core.c
>> +++ b/drivers/base/core.c
>> @@ -9,6 +9,7 @@
>> */
>>
>> #include <linux/acpi.h>
>> +#include <linux/async.h>
>> #include <linux/cpufreq.h>
>> #include <linux/device.h>
>> #include <linux/err.h>
>> @@ -3531,6 +3532,7 @@ static int device_private_init(struct device *dev)
>> klist_init(&dev->p->klist_children, klist_children_get,
>> klist_children_put);
>> INIT_LIST_HEAD(&dev->p->deferred_probe);
>> + dev->p->shutdown_after = 0;
>> return 0;
>> }
>>
>> @@ -4781,6 +4783,8 @@ int device_change_owner(struct device *dev, kuid_t kuid, kgid_t kgid)
>> }
>> EXPORT_SYMBOL_GPL(device_change_owner);
>>
>> +static ASYNC_DOMAIN(sd_domain);
>> +
>> static void shutdown_one_device(struct device *dev)
>> {
>> /* hold lock to avoid race with probe/release */
>> @@ -4816,12 +4820,34 @@ static void shutdown_one_device(struct device *dev)
>> put_device(dev->parent);
>> }
>>
>> +/**
>> + * shutdown_one_device_async
>> + * @data: the pointer to the struct device to be shutdown
>> + * @cookie: not used
>> + *
>> + * Shuts down one device, after waiting for shutdown_after to complete.
>> + * shutdown_after should be set to the cookie of the last child or consumer
>> + * of this device to be shutdown (if any), or to the cookie of the previous
>> + * device to be shut down for devices that don't enable asynchronous shutdown.
>> + */
>> +static void shutdown_one_device_async(void *data, async_cookie_t cookie)
>> +{
>> + struct device *dev = data;
>> +
>> + async_synchronize_cookie_domain(dev->p->shutdown_after + 1, &sd_domain);
>> +
>> + shutdown_one_device(dev);
>> +}
>> +
>> /**
>> * device_shutdown - call ->shutdown() on each device to shutdown.
>> */
>> void device_shutdown(void)
>> {
>> struct device *dev, *parent;
>> + async_cookie_t cookie = 0;
>> + struct device_link *link;
>> + int idx;
>>
>> wait_for_device_probe();
>> device_block_probing();
>> @@ -4852,11 +4878,37 @@ void device_shutdown(void)
>> list_del_init(&dev->kobj.entry);
>> spin_unlock(&devices_kset->list_lock);
>>
>> - shutdown_one_device(dev);
>> +
>> + /*
>> + * Set cookie for devices that will be shut down synchronously
>> + */
>> + if (!dev->driver || !dev->driver->async_shutdown_enable)
>> + dev->p->shutdown_after = cookie;
>> +
>> + get_device(dev);
>> + get_device(parent);
>> +
>> + cookie = async_schedule_domain(shutdown_one_device_async,
>> + dev, &sd_domain);
>> + /*
>> + * Ensure parent & suppliers wait for this device to shut down
>> + */
>> + if (parent) {
>> + parent->p->shutdown_after = cookie;
>> + put_device(parent);
>> + }
>> +
>> + idx = device_links_read_lock();
>> + list_for_each_entry_rcu(link, &dev->links.suppliers, c_node,
>> + device_links_read_lock_held())
>> + link->supplier->p->shutdown_after = cookie;
>
> This will not fly if a supplier registered after its consumer. As we are
> walking the list backward, the supplier will now wait for something that
> is coming later during shutdown if the affected devices are still doing
> this synchronously (as almost all at this stage). This creates a
> circular dependency.
>
> Seems to explain the reboot hang that I'm seeing on an embedded target
> with a mailbox dev waiting for a remoteproc dev while the mailbox being
> after the remoteproc in the list (thus first on shutting down).
>
> This resolves the issue for me so far, but I don't think we are done yet:
>
> list_for_each_entry_rcu(link, &dev->links.suppliers, c_node,
> device_links_read_lock_held()) {
> if (link->supplier->driver &&
> link->supplier->driver->async_shutdown_enable)
> link->supplier->p->shutdown_after = cookie;
> }
>
> I wonder if overwriting the supplier's shutdown_after unconditionally is
> a good idea. A supplier may have multiple consumers - will we overwrite
> in the right order then? And why do we now need this ordering when we
> were so far shutting down suppliers while consumers were still up?
>
The devices_kset list should already be in the right order for shutting
stuff down--i.e., parents and suppliers should be shutdown later as the
device_shutdown loop goes through the devices.
With async shutdown this loop still goes the devices_kset list in the same
order it did before the patch, so my expectation was that any parents/suppliers
would come later in the loop than any children/siblings, and it would update
shutdown_after as it went to ensure that each device ended up with the cookie
of the last child/consumer that it needed to wait for.
However, I missed that the devices_kset list isn't always reordered when a
devlink is added and a consumer isn't dependent on the supplier (see
device_is_dependent()). I have a patch would address that, and add a sanity
check in case any devices get in the list in the wrong order somehow:
diff --git a/drivers/base/core.c b/drivers/base/core.c
index b69b82da8837..52d64b419c01 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -4832,6 +4832,13 @@ static void shutdown_one_device_async(void *data, async_cookie_t cookie)
{
struct device *dev = data;
+ /*
+ * Sanity check to prevent shutdown hang in case a parent or supplier
+ * is in devices_kset list in the wrong order
+ */
+ if (dev->p->shutdown_after > cookie)
+ dev->p->shutdown_after = cookie - 1;
+
async_synchronize_cookie_domain(dev->p->shutdown_after + 1, &sd_domain);
shutdown_one_device(dev);
@@ -4898,8 +4905,11 @@ void device_shutdown(void)
idx = device_links_read_lock();
list_for_each_entry_rcu(link, &dev->links.suppliers, c_node,
- device_links_read_lock_held())
+ device_links_read_lock_held()) {
+ if (device_link_flag_is_sync_state_only(link->flags))
+ continue;
link->supplier->p->shutdown_after = cookie;
+ }
device_links_read_unlock(idx);
put_device(dev);
I'll submit this shortly if nobody responds with any issues with this.
Thank you!
> Same overwrite question applies to setting shutdown_after in parents.
> Don't we rather need a list for shutdown_after, at least once everything
> is async?
>
> This needs to be thought through once more, I guess.
>
> Jan
>
>> + device_links_read_unlock(idx);
>> + put_device(dev);
>>
>> spin_lock(&devices_kset->list_lock);
>> }
>> spin_unlock(&devices_kset->list_lock);
>> + async_synchronize_full_domain(&sd_domain);
>> }
>>
>> /*
>> diff --git a/include/linux/device/driver.h b/include/linux/device/driver.h
>> index 1fc8b68786de..2b6127faaa25 100644
>> --- a/include/linux/device/driver.h
>> +++ b/include/linux/device/driver.h
>> @@ -56,6 +56,7 @@ enum probe_type {
>> * @mod_name: Used for built-in modules.
>> * @suppress_bind_attrs: Disables bind/unbind via sysfs.
>> * @probe_type: Type of the probe (synchronous or asynchronous) to use.
>> + * @async_shutdown_enable: Enables devices to be shutdown asynchronously.
>> * @of_match_table: The open firmware table.
>> * @acpi_match_table: The ACPI match table.
>> * @probe: Called to query the existence of a specific device,
>> @@ -102,6 +103,7 @@ struct device_driver {
>>
>> bool suppress_bind_attrs; /* disables bind/unbind via sysfs */
>> enum probe_type probe_type;
>> + bool async_shutdown_enable;
>>
>> const struct of_device_id *of_match_table;
>> const struct acpi_device_id *acpi_match_table;
>
More information about the Linux-nvme
mailing list