[PATCH 1/2] nvme: make independent ns identify default

[Hannes Reinecke]

On 10/8/24 16:55, Matias Bjørling wrote:
> From: Matias Bjørling <matias.bjorling at wdc.com>
> 
> The NVMe 2.0 specification adds an independent identify namespace
> data structure that contains generic attributes that apply to all
> namespace types. Some attributes carry over from the NVM command set
> identify namespace data structure, and others are new.
> 
> Currently, the data structure only considered when CRIMS is enabled or
> when the namespace type is key-value.
> 
> However, the independent namespace data structure
> is mandatory for devices that implement features from the 2.0+
> specification. Therefore, we can check this data structure first. If
> unavailable, retrieve the generic attributes from the NVM command set
> identify namespace data structure.
> 
> Signed-off-by: Matias Bjørling <matias.bjorling at wdc.com>
> ---
>   drivers/nvme/host/core.c | 7 +++----
>   1 file changed, 3 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
> index 0dc8bcc664f2..9cbef6342c39 100644
> --- a/drivers/nvme/host/core.c
> +++ b/drivers/nvme/host/core.c
> @@ -3999,7 +3999,7 @@ static void nvme_scan_ns(struct nvme_ctrl *ctrl, unsigned nsid)
>   {
>   	struct nvme_ns_info info = { .nsid = nsid };
>   	struct nvme_ns *ns;
> -	int ret;
> +	int ret = 1;
>   
>   	if (nvme_identify_ns_descs(ctrl, &info))
>   		return;
> @@ -4015,10 +4015,9 @@ static void nvme_scan_ns(struct nvme_ctrl *ctrl, unsigned nsid)
>   	 * data structure to find all the generic information that is needed to
>   	 * set up a namespace.  If not fall back to the legacy version.
>   	 */
> -	if ((ctrl->cap & NVME_CAP_CRMS_CRIMS) ||
> -	    (info.ids.csi != NVME_CSI_NVM && info.ids.csi != NVME_CSI_ZNS))
> +	if (!nvme_ctrl_limited_cns(ctrl))
>   		ret = nvme_ns_info_from_id_cs_indep(ctrl, &info);
> -	else
> +	if (ret > 0)
>   		ret = nvme_ns_info_from_identify(ctrl, &info);
>   
>   	if (info.is_removed)

That is a very odd coding. 'info' will only be filled out for a non-zero
return value of nvme_ns_info_from_cs_indep().
So why not check for that?
But if we get an NVME status back there is a fair chance that something 
else than 'invalid field' (or whatever indicated that the command is not 
supported). That then would cause the device to be misdetected without 
the admin knowning.
Shouldn't we add a message if we fall back to nvme_ns_info_from_identify()?

Cheers,

Hannes
-- 
Dr. Hannes Reinecke                  Kernel Storage Architect
hare at suse.de                                +49 911 74053 688
SUSE Software Solutions GmbH, Frankenstr. 146, 90461 Nürnberg
HRB 36809 (AG Nürnberg), GF: I. Totev, A. McDonald, W. Knoblich