[PATCH v4 06/11] block: Add atomic write support for statx

John Garry john.g.garry at oracle.com
Mon Feb 19 05:01:04 PST 2024


From: Prasad Singamsetty <prasad.singamsetty at oracle.com>

Extend statx system call to return additional info for atomic write support
support if the specified file is a block device.

Signed-off-by: Prasad Singamsetty <prasad.singamsetty at oracle.com>
Signed-off-by: John Garry <john.g.garry at oracle.com>
---
 block/bdev.c           | 37 +++++++++++++++++++++++++++----------
 fs/stat.c              | 13 ++++++-------
 include/linux/blkdev.h |  5 +++--
 3 files changed, 36 insertions(+), 19 deletions(-)

diff --git a/block/bdev.c b/block/bdev.c
index e9f1b12bd75c..0dada9902bd4 100644
--- a/block/bdev.c
+++ b/block/bdev.c
@@ -1116,24 +1116,41 @@ void sync_bdevs(bool wait)
 	iput(old_inode);
 }
 
+#define BDEV_STATX_SUPPORTED_MASK (STATX_DIOALIGN | STATX_WRITE_ATOMIC)
+
 /*
- * Handle STATX_DIOALIGN for block devices.
- *
- * Note that the inode passed to this is the inode of a block device node file,
- * not the block device's internal inode.  Therefore it is *not* valid to use
- * I_BDEV() here; the block device has to be looked up by i_rdev instead.
+ * Handle STATX_{DIOALIGN, WRITE_ATOMIC} for block devices.
  */
-void bdev_statx_dioalign(struct inode *inode, struct kstat *stat)
+void bdev_statx(struct dentry *dentry, struct kstat *stat, u32 request_mask)
 {
 	struct block_device *bdev;
 
-	bdev = blkdev_get_no_open(inode->i_rdev);
+	if (!(request_mask & BDEV_STATX_SUPPORTED_MASK))
+		return;
+
+	/*
+	 * Note that d_backing_inode() returns the inode of a block device node
+	 * file, not the block device's internal inode.  Therefore it is *not*
+	 * valid to use I_BDEV() here; the block device has to be looked up by
+	 * i_rdev instead.
+	 */
+	bdev = blkdev_get_no_open(d_backing_inode(dentry)->i_rdev);
 	if (!bdev)
 		return;
 
-	stat->dio_mem_align = bdev_dma_alignment(bdev) + 1;
-	stat->dio_offset_align = bdev_logical_block_size(bdev);
-	stat->result_mask |= STATX_DIOALIGN;
+	if (request_mask & STATX_DIOALIGN) {
+		stat->dio_mem_align = bdev_dma_alignment(bdev) + 1;
+		stat->dio_offset_align = bdev_logical_block_size(bdev);
+		stat->result_mask |= STATX_DIOALIGN;
+	}
+
+	if (request_mask & STATX_WRITE_ATOMIC && bdev_can_atomic_write(bdev)) {
+		struct request_queue *bd_queue = bdev->bd_queue;
+
+		generic_fill_statx_atomic_writes(stat,
+			queue_atomic_write_unit_min_bytes(bd_queue),
+			queue_atomic_write_unit_max_bytes(bd_queue));
+	}
 
 	blkdev_put_no_open(bdev);
 }
diff --git a/fs/stat.c b/fs/stat.c
index 522787a4ab6a..bd0618477702 100644
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -290,13 +290,12 @@ static int vfs_statx(int dfd, struct filename *filename, int flags,
 		stat->attributes |= STATX_ATTR_MOUNT_ROOT;
 	stat->attributes_mask |= STATX_ATTR_MOUNT_ROOT;
 
-	/* Handle STATX_DIOALIGN for block devices. */
-	if (request_mask & STATX_DIOALIGN) {
-		struct inode *inode = d_backing_inode(path.dentry);
-
-		if (S_ISBLK(inode->i_mode))
-			bdev_statx_dioalign(inode, stat);
-	}
+	/* If this is a block device inode, override the filesystem
+	 * attributes with the block device specific parameters
+	 * that need to be obtained from the bdev backing inode
+	 */
+	if (S_ISBLK(d_backing_inode(path.dentry)->i_mode))
+		bdev_statx(path.dentry, stat, request_mask);
 
 	path_put(&path);
 	if (retry_estale(error, lookup_flags)) {
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 40ed56ef4937..4f04456f1250 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1541,7 +1541,7 @@ int sync_blockdev(struct block_device *bdev);
 int sync_blockdev_range(struct block_device *bdev, loff_t lstart, loff_t lend);
 int sync_blockdev_nowait(struct block_device *bdev);
 void sync_bdevs(bool wait);
-void bdev_statx_dioalign(struct inode *inode, struct kstat *stat);
+void bdev_statx(struct dentry *dentry, struct kstat *stat, u32 request_mask);
 void printk_all_partitions(void);
 int __init early_lookup_bdev(const char *pathname, dev_t *dev);
 #else
@@ -1559,7 +1559,8 @@ static inline int sync_blockdev_nowait(struct block_device *bdev)
 static inline void sync_bdevs(bool wait)
 {
 }
-static inline void bdev_statx_dioalign(struct inode *inode, struct kstat *stat)
+static inline void bdev_statx(struct dentry *dentry, struct kstat *stat,
+				u32 request_mask)
 {
 }
 static inline void printk_all_partitions(void)
-- 
2.31.1




More information about the Linux-nvme mailing list