[PATCH 12/15] virtio_blk: pass queue_limits to blk_mq_alloc_disk
Christoph Hellwig
hch at lst.de
Sun Feb 11 22:46:06 PST 2024
Call virtblk_read_limits and most of virtblk_probe_zoned_device before
allocating the gendisk and thus request_queue and make them read into
a queue_limits structure instead. Pass this initialized queue_limits
to blk_mq_alloc_disk to set the queue up with the right parameters
from the start and only leave a few final touches for zoned devices
to be done just before adding the disk.
Signed-off-by: Christoph Hellwig <hch at lst.de>
Reviewed-by: Keith Busch <kbusch at kernel.org>
Reviewed-by: Stefan Hajnoczi <stefanha at redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch at nvidia.com>
Reviewed-by: Ming Lei <ming.lei at redhat.com>
Reviewed-by: Damien Le Moal <dlemoal at kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen at oracle.com>
Reviewed-by: Hannes Reinecke <hare at suse.de>
---
drivers/block/virtio_blk.c | 130 ++++++++++++++++++-------------------
1 file changed, 64 insertions(+), 66 deletions(-)
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index dd46ccd9f84c7d..d8b55874cd5950 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -720,16 +720,15 @@ static int virtblk_report_zones(struct gendisk *disk, sector_t sector,
return ret;
}
-static int virtblk_probe_zoned_device(struct virtio_device *vdev,
- struct virtio_blk *vblk,
- struct request_queue *q)
+static int virtblk_read_zoned_limits(struct virtio_blk *vblk,
+ struct queue_limits *lim)
{
+ struct virtio_device *vdev = vblk->vdev;
u32 v, wg;
dev_dbg(&vdev->dev, "probing host-managed zoned device\n");
- disk_set_zoned(vblk->disk);
- blk_queue_flag_set(QUEUE_FLAG_ZONE_RESETALL, q);
+ lim->zoned = true;
virtio_cread(vdev, struct virtio_blk_config,
zoned.max_open_zones, &v);
@@ -747,8 +746,8 @@ static int virtblk_probe_zoned_device(struct virtio_device *vdev,
dev_warn(&vdev->dev, "zero write granularity reported\n");
return -ENODEV;
}
- blk_queue_physical_block_size(q, wg);
- blk_queue_io_min(q, wg);
+ lim->physical_block_size = wg;
+ lim->io_min = wg;
dev_dbg(&vdev->dev, "write granularity = %u\n", wg);
@@ -764,13 +763,13 @@ static int virtblk_probe_zoned_device(struct virtio_device *vdev,
vblk->zone_sectors);
return -ENODEV;
}
- blk_queue_chunk_sectors(q, vblk->zone_sectors);
+ lim->chunk_sectors = vblk->zone_sectors;
dev_dbg(&vdev->dev, "zone sectors = %u\n", vblk->zone_sectors);
if (virtio_has_feature(vdev, VIRTIO_BLK_F_DISCARD)) {
dev_warn(&vblk->vdev->dev,
"ignoring negotiated F_DISCARD for zoned device\n");
- blk_queue_max_discard_sectors(q, 0);
+ lim->max_hw_discard_sectors = 0;
}
virtio_cread(vdev, struct virtio_blk_config,
@@ -785,25 +784,21 @@ static int virtblk_probe_zoned_device(struct virtio_device *vdev,
wg, v);
return -ENODEV;
}
- blk_queue_max_zone_append_sectors(q, v);
+ lim->max_zone_append_sectors = v;
dev_dbg(&vdev->dev, "max append sectors = %u\n", v);
- return blk_revalidate_disk_zones(vblk->disk, NULL);
+ return 0;
}
-
#else
-
/*
- * Zoned block device support is not configured in this kernel.
- * Host-managed zoned devices can't be supported, but others are
- * good to go as regular block devices.
+ * Zoned block device support is not configured in this kernel, host-managed
+ * zoned devices can't be supported.
*/
#define virtblk_report_zones NULL
-
-static inline int virtblk_probe_zoned_device(struct virtio_device *vdev,
- struct virtio_blk *vblk, struct request_queue *q)
+static inline int virtblk_read_zoned_limits(struct virtio_blk *vblk,
+ struct queue_limits *lim)
{
- dev_err(&vdev->dev,
+ dev_err(&vblk->vdev->dev,
"virtio_blk: zoned devices are not supported");
return -EOPNOTSUPP;
}
@@ -1248,9 +1243,9 @@ static const struct blk_mq_ops virtio_mq_ops = {
static unsigned int virtblk_queue_depth;
module_param_named(queue_depth, virtblk_queue_depth, uint, 0444);
-static int virtblk_read_limits(struct virtio_blk *vblk)
+static int virtblk_read_limits(struct virtio_blk *vblk,
+ struct queue_limits *lim)
{
- struct request_queue *q = vblk->disk->queue;
struct virtio_device *vdev = vblk->vdev;
u32 v, blk_size, max_size, sg_elems, opt_io_size;
u32 max_discard_segs = 0;
@@ -1273,10 +1268,10 @@ static int virtblk_read_limits(struct virtio_blk *vblk)
sg_elems = min_t(u32, sg_elems, VIRTIO_BLK_MAX_SG_ELEMS - 2);
/* We can handle whatever the host told us to handle. */
- blk_queue_max_segments(q, sg_elems);
+ lim->max_segments = sg_elems;
/* No real sector limit. */
- blk_queue_max_hw_sectors(q, UINT_MAX);
+ lim->max_hw_sectors = UINT_MAX;
max_dma_size = virtio_max_dma_size(vdev);
max_size = max_dma_size > U32_MAX ? U32_MAX : max_dma_size;
@@ -1288,7 +1283,7 @@ static int virtblk_read_limits(struct virtio_blk *vblk)
if (!err)
max_size = min(max_size, v);
- blk_queue_max_segment_size(q, max_size);
+ lim->max_segment_size = max_size;
/* Host can optionally specify the block size of the device */
err = virtio_cread_feature(vdev, VIRTIO_BLK_F_BLK_SIZE,
@@ -1303,35 +1298,34 @@ static int virtblk_read_limits(struct virtio_blk *vblk)
return err;
}
- blk_queue_logical_block_size(q, blk_size);
+ lim->logical_block_size = blk_size;
} else
- blk_size = queue_logical_block_size(q);
+ blk_size = lim->logical_block_size;
/* Use topology information if available */
err = virtio_cread_feature(vdev, VIRTIO_BLK_F_TOPOLOGY,
struct virtio_blk_config, physical_block_exp,
&physical_block_exp);
if (!err && physical_block_exp)
- blk_queue_physical_block_size(q,
- blk_size * (1 << physical_block_exp));
+ lim->physical_block_size = blk_size * (1 << physical_block_exp);
err = virtio_cread_feature(vdev, VIRTIO_BLK_F_TOPOLOGY,
struct virtio_blk_config, alignment_offset,
&alignment_offset);
if (!err && alignment_offset)
- blk_queue_alignment_offset(q, blk_size * alignment_offset);
+ lim->alignment_offset = blk_size * alignment_offset;
err = virtio_cread_feature(vdev, VIRTIO_BLK_F_TOPOLOGY,
struct virtio_blk_config, min_io_size,
&min_io_size);
if (!err && min_io_size)
- blk_queue_io_min(q, blk_size * min_io_size);
+ lim->io_min = blk_size * min_io_size;
err = virtio_cread_feature(vdev, VIRTIO_BLK_F_TOPOLOGY,
struct virtio_blk_config, opt_io_size,
&opt_io_size);
if (!err && opt_io_size)
- blk_queue_io_opt(q, blk_size * opt_io_size);
+ lim->io_opt = blk_size * opt_io_size;
if (virtio_has_feature(vdev, VIRTIO_BLK_F_DISCARD)) {
virtio_cread(vdev, struct virtio_blk_config,
@@ -1339,7 +1333,7 @@ static int virtblk_read_limits(struct virtio_blk *vblk)
virtio_cread(vdev, struct virtio_blk_config,
max_discard_sectors, &v);
- blk_queue_max_discard_sectors(q, v ? v : UINT_MAX);
+ lim->max_hw_discard_sectors = v ? v : UINT_MAX;
virtio_cread(vdev, struct virtio_blk_config, max_discard_seg,
&max_discard_segs);
@@ -1348,7 +1342,7 @@ static int virtblk_read_limits(struct virtio_blk *vblk)
if (virtio_has_feature(vdev, VIRTIO_BLK_F_WRITE_ZEROES)) {
virtio_cread(vdev, struct virtio_blk_config,
max_write_zeroes_sectors, &v);
- blk_queue_max_write_zeroes_sectors(q, v ? v : UINT_MAX);
+ lim->max_write_zeroes_sectors = v ? v : UINT_MAX;
}
/* The discard and secure erase limits are combined since the Linux
@@ -1391,7 +1385,7 @@ static int virtblk_read_limits(struct virtio_blk *vblk)
return -EINVAL;
}
- blk_queue_max_secure_erase_sectors(q, v);
+ lim->max_secure_erase_sectors = v;
virtio_cread(vdev, struct virtio_blk_config,
max_secure_erase_seg, &v);
@@ -1418,13 +1412,34 @@ static int virtblk_read_limits(struct virtio_blk *vblk)
if (!max_discard_segs)
max_discard_segs = sg_elems;
- blk_queue_max_discard_segments(q,
- min(max_discard_segs, MAX_DISCARD_SEGMENTS));
+ lim->max_discard_segments =
+ min(max_discard_segs, MAX_DISCARD_SEGMENTS);
if (discard_granularity)
- q->limits.discard_granularity = discard_granularity << SECTOR_SHIFT;
+ lim->discard_granularity =
+ discard_granularity << SECTOR_SHIFT;
else
- q->limits.discard_granularity = blk_size;
+ lim->discard_granularity = blk_size;
+ }
+
+ if (virtio_has_feature(vdev, VIRTIO_BLK_F_ZONED)) {
+ u8 model;
+
+ virtio_cread(vdev, struct virtio_blk_config, zoned.model, &model);
+ switch (model) {
+ case VIRTIO_BLK_Z_NONE:
+ case VIRTIO_BLK_Z_HA:
+ /* treat host-aware devices as non-zoned */
+ return 0;
+ case VIRTIO_BLK_Z_HM:
+ err = virtblk_read_zoned_limits(vblk, lim);
+ if (err)
+ return err;
+ break;
+ default:
+ dev_err(&vdev->dev, "unsupported zone model %d\n", model);
+ return -EINVAL;
+ }
}
return 0;
@@ -1433,7 +1448,7 @@ static int virtblk_read_limits(struct virtio_blk *vblk)
static int virtblk_probe(struct virtio_device *vdev)
{
struct virtio_blk *vblk;
- struct request_queue *q;
+ struct queue_limits lim = { };
int err, index;
unsigned int queue_depth;
@@ -1493,12 +1508,15 @@ static int virtblk_probe(struct virtio_device *vdev)
if (err)
goto out_free_vq;
- vblk->disk = blk_mq_alloc_disk(&vblk->tag_set, NULL, vblk);
+ err = virtblk_read_limits(vblk, &lim);
+ if (err)
+ goto out_free_tags;
+
+ vblk->disk = blk_mq_alloc_disk(&vblk->tag_set, &lim, vblk);
if (IS_ERR(vblk->disk)) {
err = PTR_ERR(vblk->disk);
goto out_free_tags;
}
- q = vblk->disk->queue;
virtblk_name_format("vd", index, vblk->disk->disk_name, DISK_NAME_LEN);
@@ -1516,10 +1534,6 @@ static int virtblk_probe(struct virtio_device *vdev)
if (virtio_has_feature(vdev, VIRTIO_BLK_F_RO))
set_disk_ro(vblk->disk, 1);
- err = virtblk_read_limits(vblk);
- if (err)
- goto out_cleanup_disk;
-
virtblk_update_capacity(vblk, false);
virtio_device_ready(vdev);
@@ -1527,27 +1541,11 @@ static int virtblk_probe(struct virtio_device *vdev)
* All steps that follow use the VQs therefore they need to be
* placed after the virtio_device_ready() call above.
*/
- if (virtio_has_feature(vdev, VIRTIO_BLK_F_ZONED)) {
- u8 model;
-
- virtio_cread(vdev, struct virtio_blk_config, zoned.model,
- &model);
- switch (model) {
- case VIRTIO_BLK_Z_NONE:
- case VIRTIO_BLK_Z_HA:
- /* Present the host-aware device as non-zoned */
- break;
- case VIRTIO_BLK_Z_HM:
- err = virtblk_probe_zoned_device(vdev, vblk, q);
- if (err)
- goto out_cleanup_disk;
- break;
- default:
- dev_err(&vdev->dev, "unsupported zone model %d\n",
- model);
- err = -EINVAL;
+ if (IS_ENABLED(CONFIG_BLK_DEV_ZONED) && lim.zoned) {
+ blk_queue_flag_set(QUEUE_FLAG_ZONE_RESETALL, vblk->disk->queue);
+ err = blk_revalidate_disk_zones(vblk->disk, NULL);
+ if (err)
goto out_cleanup_disk;
- }
}
err = device_add_disk(&vdev->dev, vblk->disk, virtblk_attr_groups);
--
2.39.2
More information about the Linux-nvme
mailing list