[PATCH v3 12/15] scsi: use block layer helpers to calculate num of queues

[Daniel Wagner]

Multiqueue devices should only allocate queues for the housekeeping CPUs
when isolcpus=io_queue is set. This avoids that the isolated CPUs get
disturbed with OS workload.

Use helpers which calculates the correct number of queues which should
be used when isolcpus is used.

Signed-off-by: Daniel Wagner <dwagner at suse.de>
---
 drivers/scsi/megaraid/megaraid_sas_base.c | 15 +++++++++------
 drivers/scsi/qla2xxx/qla_isr.c            | 10 +++++-----
 drivers/scsi/smartpqi/smartpqi_init.c     |  5 ++---
 3 files changed, 16 insertions(+), 14 deletions(-)

diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index d026b7513c8d..ddddcdbf71b2 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -5964,7 +5964,8 @@ megasas_alloc_irq_vectors(struct megasas_instance *instance)
 		else
 			instance->iopoll_q_count = 0;
 
-		num_msix_req = num_online_cpus() + instance->low_latency_index_start;
+		num_msix_req = blk_mq_num_online_queues(0) +
+			instance->low_latency_index_start;
 		instance->msix_vectors = min(num_msix_req,
 				instance->msix_vectors);
 
@@ -5980,7 +5981,8 @@ megasas_alloc_irq_vectors(struct megasas_instance *instance)
 		/* Disable Balanced IOPS mode and try realloc vectors */
 		instance->perf_mode = MR_LATENCY_PERF_MODE;
 		instance->low_latency_index_start = 1;
-		num_msix_req = num_online_cpus() + instance->low_latency_index_start;
+		num_msix_req = blk_mq_num_online_queues(0) +
+			instance->low_latency_index_start;
 
 		instance->msix_vectors = min(num_msix_req,
 				instance->msix_vectors);
@@ -6236,7 +6238,7 @@ static int megasas_init_fw(struct megasas_instance *instance)
 		intr_coalescing = (scratch_pad_1 & MR_INTR_COALESCING_SUPPORT_OFFSET) ?
 								true : false;
 		if (intr_coalescing &&
-			(num_online_cpus() >= MR_HIGH_IOPS_QUEUE_COUNT) &&
+			(blk_mq_num_online_queues(0) >= MR_HIGH_IOPS_QUEUE_COUNT) &&
 			(instance->msix_vectors == MEGASAS_MAX_MSIX_QUEUES))
 			instance->perf_mode = MR_BALANCED_PERF_MODE;
 		else
@@ -6280,7 +6282,8 @@ static int megasas_init_fw(struct megasas_instance *instance)
 		else
 			instance->low_latency_index_start = 1;
 
-		num_msix_req = num_online_cpus() + instance->low_latency_index_start;
+		num_msix_req = blk_mq_num_online_queues(0) +
+			instance->low_latency_index_start;
 
 		instance->msix_vectors = min(num_msix_req,
 				instance->msix_vectors);
@@ -6312,8 +6315,8 @@ static int megasas_init_fw(struct megasas_instance *instance)
 	megasas_setup_reply_map(instance);
 
 	dev_info(&instance->pdev->dev,
-		"current msix/online cpus\t: (%d/%d)\n",
-		instance->msix_vectors, (unsigned int)num_online_cpus());
+		"current msix/max num queues\t: (%d/%u)\n",
+		instance->msix_vectors, blk_mq_num_online_queues(0));
 	dev_info(&instance->pdev->dev,
 		"RDPQ mode\t: (%s)\n", instance->is_rdpq ? "enabled" : "disabled");
 
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index fe98c76e9be3..c4c6b5c6658c 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -4533,13 +4533,13 @@ qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp)
 	if (USER_CTRL_IRQ(ha) || !ha->mqiobase) {
 		/* user wants to control IRQ setting for target mode */
 		ret = pci_alloc_irq_vectors(ha->pdev, min_vecs,
-		    min((u16)ha->msix_count, (u16)(num_online_cpus() + min_vecs)),
-		    PCI_IRQ_MSIX);
+			blk_mq_num_online_queues(ha->msix_count) + min_vecs,
+			PCI_IRQ_MSIX);
 	} else
 		ret = pci_alloc_irq_vectors_affinity(ha->pdev, min_vecs,
-		    min((u16)ha->msix_count, (u16)(num_online_cpus() + min_vecs)),
-		    PCI_IRQ_MSIX | PCI_IRQ_AFFINITY,
-		    &desc);
+			blk_mq_num_online_queues(ha->msix_count) + min_vecs,
+			PCI_IRQ_MSIX | PCI_IRQ_AFFINITY,
+			&desc);
 
 	if (ret < 0) {
 		ql_log(ql_log_fatal, vha, 0x00c7,
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index 1fb13d4e0448..da361602ad7d 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -5264,15 +5264,14 @@ static void pqi_calculate_queue_resources(struct pqi_ctrl_info *ctrl_info)
 	if (reset_devices) {
 		num_queue_groups = 1;
 	} else {
-		int num_cpus;
 		int max_queue_groups;
 
 		max_queue_groups = min(ctrl_info->max_inbound_queues / 2,
 			ctrl_info->max_outbound_queues - 1);
 		max_queue_groups = min(max_queue_groups, PQI_MAX_QUEUE_GROUPS);
 
-		num_cpus = num_online_cpus();
-		num_queue_groups = min(num_cpus, ctrl_info->max_msix_vectors);
+		num_queue_groups =
+			blk_mq_num_online_queues(ctrl_info->max_msix_vectors);
 		num_queue_groups = min(num_queue_groups, max_queue_groups);
 	}
 

-- 
2.46.0