[PATCH 5/6] dt-bindings: mtd: Add Documentation for Airoha fixed-partitions

[Rob Herring (Arm)]

On Sun, 04 Aug 2024 13:41:05 +0200, Christian Marangi wrote:
> Add Documentation for Airoha fixed-partitions compatibles.
> 
> Airoha based SoC declare a dedicated partition at the end of the flash to
> store calibration and device specific data, in addition to fixed
> partitions.
> The offset of this special partition is not well defined as it depends on
> flash bad block management that might require reserving additional space
> at the end of the flash.
> 
> This binding allows defining all fixed partitions and marking the last one
> to detect the correct offset.
> 
> Signed-off-by: Christian Marangi <ansuelsmth at gmail.com>
> ---
>  .../partitions/airoha,fixed-partitions.yaml   | 80 +++++++++++++++++++
>  1 file changed, 80 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mtd/partitions/airoha,fixed-partitions.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/mtd/partitions/airoha,fixed-partitions.example.dtb: /example-0/partitions: failed to match any schema with compatible: ['airoha,fixed-partitions']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240804114108.1893-6-ansuelsmth@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.