[PATCH blktests v3 08/15] nvme/rc: introduce NVMET_BLKDEV_TYPES

[Shin'ichiro Kawasaki]

Some of the test cases in nvme test group do the exact same test for two
blkdev types: device type and file type. Except for this difference, the
test cases are pure duplication. It is desired to avoid the duplication.
When the duplication is avoided, it is required to control which
condition to run the test.
    
To avoid the duplication and also to allow the blkdev type control,
introduce a new configuration parameter NVMET_BLKDEV_TYPES. This
parameter specifies which blkdev type to setup for the tests. It can
take one of the blkdev types. Or it can take both types, which is the
default. When both types are specified, the test cases are repeated
twice to cover the types.
    
Also add the helper function _set_nvme_trtype_and_nvmet_blkdev_type().
It sets up nvmet_blkdev_type variable for each test case run from
NVMET_BLKDEV_TYPES. It also sets nvme_trtype from NVMET_TRTYPES.

When NVMET_BLKDEV_TYPES and NVMET_TRTYPES are set as follows, the test
case with _set_nvme_trtype_and_nvmet_blkdev_type in set_condition() hook
is called 2 x 3 = 6 times.

  NVMET_BLKDEV_TYPES="device file"
  NVMET_TRTYPES="loop rdma tcp"

Reviewed-by: Daniel Wagner <dwagner at suse.de>
Reviewed-by: Chaitanya Kulkarni <kch at nvidia.com>
Acked-by: Nitesh Shetty <nj.shetty at samsung.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki at wdc.com>
---
 Documentation/running-tests.md |  5 +++++
 tests/nvme/rc                  | 22 ++++++++++++++++++++++
 2 files changed, 27 insertions(+)

diff --git a/Documentation/running-tests.md b/Documentation/running-tests.md
index 571ee04..64aff7c 100644
--- a/Documentation/running-tests.md
+++ b/Documentation/running-tests.md
@@ -108,6 +108,11 @@ The NVMe tests can be additionally parameterized via environment variables.
   tests are repeated to cover all of the transports specified.
   This parameter had an old name 'nvme_trtype'. The old name is still usable,
   but not recommended.
+- NVMET_BLKDEV_TYPES: 'device', 'file'
+  Set up NVME target backends with the specified block device type. Multiple
+  block device types can be listed with separating spaces. In this case, the
+  tests are repeated to cover all of the block device types specified. Default
+  value is "device file".
 - nvme_img_size: '1G' (default)
   Run the tests with given image size in bytes. 'm', 'M', 'g'
 	and 'G' postfix are supported.
diff --git a/tests/nvme/rc b/tests/nvme/rc
index ec54609..a31690d 100644
--- a/tests/nvme/rc
+++ b/tests/nvme/rc
@@ -22,6 +22,7 @@ _check_conflict_and_set_default NVMET_TRTYPES nvme_trtype "loop"
 nvme_img_size=${nvme_img_size:-"1G"}
 nvme_num_iter=${nvme_num_iter:-"1000"}
 nvmet_blkdev_type=${nvmet_blkdev_type:-"device"}
+NVMET_BLKDEV_TYPES=${NVMET_BLKDEV_TYPES:-"device file"}
 
 _NVMET_TRTYPES_is_valid() {
 	local type
@@ -54,6 +55,27 @@ _set_nvme_trtype() {
 	COND_DESC="nvmet tr=${nvme_trtype}"
 }
 
+_set_nvme_trtype_and_nvmet_blkdev_type() {
+	local index=$1
+	local bd_index tr_index
+	local -a blkdev_types
+	local -a trtypes
+
+	read -r -a blkdev_types <<< "$NVMET_BLKDEV_TYPES"
+	read -r -a trtypes <<< "$NVMET_TRTYPES"
+
+	if [[ -z $index ]]; then
+		echo $(( ${#trtypes[@]} * ${#blkdev_types[@]} ))
+		return
+	fi
+
+	bd_index=$((index / ${#trtypes[@]}))
+	tr_index=$((index % ${#trtypes[@]}))
+	nvmet_blkdev_type=${blkdev_types[bd_index]}
+	nvme_trtype=${trtypes[tr_index]}
+	COND_DESC="nvmet bd=${nvmet_blkdev_type} tr=${nvme_trtype}"
+}
+
 # TMPDIR can not be referred out of test() or test_device() context. Instead of
 # global variable def_flie_path, use this getter function.
 _nvme_def_file_path() {
-- 
2.44.0