[PATCH blktests v1 2/3] nvme/rc: Avoid triggering host nvme-cli autoconnect

Daniel Wagner dwagner at suse.de
Wed Jul 12 05:04:26 PDT 2023 

On Mon, Jul 10, 2023 at 07:30:20PM +0300, Max Gurtovoy wrote:
> 
> 
> On 10/07/2023 18:03, Daniel Wagner wrote:
> > On Mon, Jul 10, 2023 at 03:31:23PM +0300, Max Gurtovoy wrote:
> > > I think it is more than just commit message.
> > 
> > Okay, starting to understand what's the problem.
> > 
> > > A lot of code that we can avoid was added regarding the --context cmdline
> > > argument.
> > 
> > Correct and it's not optional to get the tests passing for the fc transport.
> 
> why the fc needs the --context to pass tests ?

A typical nvme test consists out of following steps (nvme/004):

// nvme target setup (1)
	_create_nvmet_subsystem "blktests-subsystem-1" "${loop_dev}" \
		"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
	_add_nvmet_subsys_to_port "${port}" "blktests-subsystem-1"

// nvme host setup (2)
	_nvme_connect_subsys "${nvme_trtype}" blktests-subsystem-1

	local nvmedev
	nvmedev=$(_find_nvme_dev "blktests-subsystem-1")
	cat "/sys/block/${nvmedev}n1/uuid"
	cat "/sys/block/${nvmedev}n1/wwid"

// nvme host teardown (3)
	_nvme_disconnect_subsys blktests-subsystem-1

// nvme target teardown (4)
	_remove_nvmet_subsystem_from_port "${port}" "blktests-subsystem-1"
	_remove_nvmet_subsystem "blktests-subsystem-1"


The corresponding output with --context

 run blktests nvme/004 at 2023-07-12 13:49:50
// (1)
 loop0: detected capacity change from 0 to 32768
 nvmet: adding nsid 1 to subsystem blktests-subsystem-1
 nvme nvme2: NVME-FC{0}: create association : host wwpn 0x20001100aa000002  rport wwpn 0x20001100aa000001: NQN "blktests-subsystem-1"
 (NULL device *): {0:0} Association created
 [174] nvmet: ctrl 1 start keep-alive timer for 5 secs
// (2)
 nvmet: creating nvm controller 1 for subsystem blktests-subsystem-1 for NQN nqn.2014-08.org.nvmexpress:uuid:0f01fb42-9f7f-4856-b0b3-51e60b8de349.
 [374] nvmet: adding queue 1 to ctrl 1.
 [1138] nvmet: adding queue 2 to ctrl 1.
 [73] nvmet: adding queue 3 to ctrl 1.
 [174] nvmet: adding queue 4 to ctrl 1.
 nvme nvme2: NVME-FC{0}: controller connect complete
 nvme nvme2: NVME-FC{0}: new ctrl: NQN "blktests-subsystem-1"
// (3)
 nvme nvme2: Removing ctrl: NQN "blktests-subsystem-1"
// (4)
 [1138] nvmet: ctrl 1 stop keep-alive
 (NULL device *): {0:0} Association deleted
 (NULL device *): {0:0} Association freed
 (NULL device *): Disconnect LS failed: No Association


and without --context

 run blktests nvme/004 at 2023-07-12 13:50:33
// (1)
 loop1: detected capacity change from 0 to 32768
 nvmet: adding nsid 1 to subsystem blktests-subsystem-1
 nvme nvme2: NVME-FC{0}: create association : host wwpn 0x20001100aa000002  rport wwpn 0x20001100aa000001: NQN "nqn.2014-08.org.nvmexpress.discovery"
 (NULL device *): {0:0} Association created
 [1235] nvmet: ctrl 1 start keep-alive timer for 120 secs
// XXX udev auto connect
 nvmet: creating discovery controller 1 for subsystem nqn.2014-08.org.nvmexpress.discovery for NQN nqn.2014-08.org.nvmexpress:uuid:242d4a24-2484-4a80-8234-d0169409c5e8.
 nvme nvme2: NVME-FC{0}: controller connect complete
 nvme nvme2: NVME-FC{0}: new ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery"
 nvme nvme3: NVME-FC{1}: create association : host wwpn 0x20001100aa000002  rport wwpn 0x20001100aa000001: NQN "blktests-subsystem-1"
 (NULL device *): {0:1} Association created
 [73] nvmet: ctrl 2 start keep-alive timer for 5 secs
// (2)
 nvmet: creating nvm controller 2 for subsystem blktests-subsystem-1 for NQN nqn.2014-08.org.nvmexpress:uuid:0f01fb42-9f7f-4856-b0b3-51e60b8de349.
 [374] nvmet: adding queue 1 to ctrl 2.
 [233] nvmet: adding queue 2 to ctrl 2.
 [73] nvmet: adding queue 3 to ctrl 2.
 [1235] nvmet: adding queue 4 to ctrl 2.
 nvme nvme3: NVME-FC{1}: controller connect complete
 nvme nvme3: NVME-FC{1}: new ctrl: NQN "blktests-subsystem-1"
// (3)
 nvme nvme3: Removing ctrl: NQN "blktests-subsystem-1"
 general protection fault, probably for non-canonical address 0xdffffc00000000a4: 0000 [#1] PREEMPT SMP KASAN NOPTI
 KASAN: null-ptr-deref in range [0x0000000000000520-0x0000000000000527]
 CPU: 1 PID: 2076 Comm: kworker/1:1 Tainted: G        W          6.4.0-rc2+ #7 f2a41a58e59b44ee1bb7bc68087ccbe6d76392dd
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown unknown
 Workqueue: nvmet-wq fcloop_fcp_recv_work [nvme_fcloop]
 RIP: 0010:nvmet_execute_disc_get_log_page+0x23f/0x8c0 [nvmet]
 Code: e8 c6 12 c7 e0 4c 89 6c 24 40 48 89 5c 24 08 4c 8b 3b 49 8d 9f 20 05 00 00 48 89 d8 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 48 89 df e8 93 12 c7 e0 4c 89 74 24 30 4c 8b 2b
 RSP: 0018:ffff888139a778a0 EFLAGS: 00010202
 RAX: 00000000000000a4 RBX: 0000000000000520 RCX: dffffc0000000000
 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffffa8af3a88
 RBP: ffff888139a77ab0 R08: dffffc0000000000 R09: fffffbfff515e752
 R10: 0000000000000000 R11: dffffc0000000001 R12: 1ffff1102734ef20
 R13: ffff888105563260 R14: ffff888105563270 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffff88815a600000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000824220 CR3: 0000000106512005 CR4: 0000000000370ee0
 Call Trace:
  <TASK>
  ? prepare_alloc_pages+0x1c5/0x580
  ? __cfi_nvmet_execute_disc_get_log_page+0x10/0x10 [nvmet 1da13efcd047161c3381cb240a95399f951fd98f]
  ? __alloc_pages+0x30e/0x650
  ? slab_post_alloc_hook+0x67/0x350
  ? __cfi___alloc_pages+0x10/0x10
  ? alloc_pages+0x30e/0x530
  ? sgl_alloc_order+0x118/0x320
  nvmet_fc_queue_fcp_req+0xa19/0xda0 [nvmet_fc 11628cdb09a094fd591bfaf88be45b97e3b18e3a]
  ? nvmet_fc_rcv_fcp_req+0x9c0/0x9c0 [nvmet_fc 11628cdb09a094fd591bfaf88be45b97e3b18e3a]
  ? lockdep_hardirqs_on_prepare+0x2aa/0x5e0
  ? nvmet_fc_rcv_fcp_req+0x4de/0x9c0 [nvmet_fc 11628cdb09a094fd591bfaf88be45b97e3b18e3a]
  nvmet_fc_rcv_fcp_req+0x4f0/0x9c0 [nvmet_fc 11628cdb09a094fd591bfaf88be45b97e3b18e3a]
  fcloop_fcp_recv_work+0x173/0x440 [nvme_fcloop 05cf1144b564c4e1626f9f15422ccf61f2af41de]
  process_one_work+0x80f/0xfb0
  ? rescuer_thread+0x1130/0x1130
  ? do_raw_spin_trylock+0xc9/0x1f0
  ? lock_acquired+0x310/0x9a0
  ? worker_thread+0xd5e/0x1260
  worker_thread+0x91e/0x1260
  ? __cfi_lock_release+0x10/0x10
  ? do_raw_spin_unlock+0x116/0x8a0
  kthread+0x25d/0x2f0
  ? __cfi_worker_thread+0x10/0x10
  ? __cfi_kthread+0x10/0x10
  ret_from_fork+0x29/0x50
  </TASK>

> > > Maybe it's worth cleaning it..
> > 
> > It really solves the problem that the autoconnect setup of nvme-cli is
> > distrubing the tests (*). The only other way I found to stop the autoconnect is
> > by disabling the udev rule completely. If autoconnect isn't enabled the context
> > isn't necessary. Though changing system configuration from blktests seems at bit
> > excessive.
> 
> we should not stop any autoconnect during blktests. The autoconnect and all
> the system admin services should run normally.

I do not agree here. The current blktests are not designed for run as
intergration tests. Sure we should also tests this but currently blktests is
just not there and tcp/rdma are not actually covered anyway.

Thanks,
Daniel

More information about the Linux-nvme mailing list