completion timeouts with pin-based interrupts in QEMU hw/nvme

[Klaus Jensen]

On Jan 18 21:03, Keith Busch wrote:
> On Thu, Jan 19, 2023 at 01:10:57PM +1000, Alistair Francis wrote:
> > On Thu, Jan 19, 2023 at 12:44 PM Keith Busch <kbusch at kernel.org> wrote:
> > >
> > > Further up, it says the "interrupt gateway" is responsible for
> > > forwarding new interrupt requests while the level remains asserted, but
> > > it doesn't look like anything is handling that, which essentially turns
> > > this into an edge interrupt. Am I missing something, or is this really
> > > not being handled?
> > 
> > Yeah, that wouldn't be handled. In QEMU the PLIC relies on QEMUs
> > internal GPIO lines to trigger an interrupt. So with the current setup
> > we only support edge triggered interrupts.
> 
> Thanks for confirming!
> 
> Klaus,
> I think we can justify introducing a work-around in the emulated device
> now. My previous proposal with pci_irq_pulse() is no good since it does
> assert+deassert, but it needs to be the other way around, so please
> don't considert that one.
> 
> Also, we ought to revisit the intms/intmc usage in the linux driver for
> threaded interrupts.

+CC: qemu-riscv

Keith,

Thanks for digging into this!

Yeah, you are probably right that we should only use the intms/intmc
changes in the use_threaded_interrupts case, not in general. While my
RFC patch does seem to "fix" this, it is just a workaround as your
analysis indicate.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-nvme/attachments/20230119/bd0daa9b/attachment.sig>