[PATCH] nvme/tcp: Add support to set the tcp worker cpu affinity

[Li Feng]

Hi Sagi,

On Wed, Apr 19, 2023 at 5:32 PM Sagi Grimberg <sagi at grimberg.me> wrote:
>
>
> >> Hey Li,
> >>
> >>> The default worker affinity policy is using all online cpus, e.g. from 0
> >>> to N-1. However, some cpus are busy for other jobs, then the nvme-tcp will
> >>> have a bad performance.
> >>> This patch adds a module parameter to set the cpu affinity for the nvme-tcp
> >>> socket worker threads.  The parameter is a comma separated list of CPU
> >>> numbers.  The list is parsed and the resulting cpumask is used to set the
> >>> affinity of the socket worker threads.  If the list is empty or the
> >>> parsing fails, the default affinity is used.
> >>
> >> I can see how this may benefit a specific set of workloads, but I have a
> >> few issues with this.
> >>
> >> - This is exposing a user interface for something that is really
> >> internal to the driver.
> >>
> >> - This is something that can be misleading and could be tricky to get
> >> right, my concern is that this would only benefit a very niche case.
> > Our storage products needs this feature~
> > If the user doesn’t know what this is, they can keep it default, so I thinks this is
> > not unacceptable.
>
> It doesn't work like that. A user interface is not something exposed to
> a specific consumer.
>
> >> - If the setting should exist, it should not be global.
> > V2 has fixed it.
> >>
> >> - I prefer not to introduce new modparams.
> >>
> >> - I'd prefer to find a way to support your use-case without introducing
> >> a config knob for it.
> >>
> > I’m looking forward to it.
>
> If you change queue_work_on to queue_work, ignoring the io_cpu, does it
> address your problem?
Sorry for the late response, I just got my machine back.
Replace the queue_work_on to queue_work, looks like it has a little
good performance.
The  busy worker is `kworker/56:1H+nvme_tcp_wq`, and fio binds to
90('cpus_allowed=90'),
I don't know why the worker 56 is selected.
The performance of 256k read up from 1.15GB/s to 1.35GB/s.

>
> Not saying that this should be a solution though.
>
> How many queues does your controller support that you happen to use
> queue 0 ?
Our controller only support one io queue currently.
>
> Also, what happens if you don't pin your process to a specific cpu, does
> that change anything?
If I don't pin the cpu, the performance has no effect.

Thanks,
Li