[PATCH] nvme-fc: Improve memory usage in nvme_fc_rcv_ls_req()
Christophe JAILLET
christophe.jaillet at wanadoo.fr
Sun Oct 2 02:59:45 PDT 2022
sizeof( struct nvmefc_ls_rcv_op ) = 64
sizeof( union nvmefc_ls_requests ) = 1024
sizeof( union nvmefc_ls_responses ) = 128
So, in nvme_fc_rcv_ls_req(), 1216 bytes of memory are requested when
kzalloc() is called.
Because of the way memory allocations are performed, 2048 bytes are
allocated. So about 800 bytes are wasted for each request.
Switch to 3 distinct memory allocations, in order to:
- save these 800 bytes
- avoid zeroing this extra memory
- make sure that memory is properly aligned in case of DMA access
("fc_dma_map_single(lsop->rspbuf)" just a few lines below)
Signed-off-by: Christophe JAILLET <christophe.jaillet at wanadoo.fr>
---
This patch is only a RFC to see if this kind of approach makes sense or
not.
I've not checked all paths, so it is likely that it is incomplete.
Anyway, it is just a trade-of between memory footprint and CPU usage (3
kzalloc() instead of 1)
I don't know if it is a slow path or not, nor if the "rport->ls_rcv_list"
list can get big (each item overuses these 800 bytes of memory)
3 kzalloc is more than just 1 (sic!), but with this patch, 800 bytes are
not zeroed anymore. Moreover, maybe the zeroing of rqstbuf and/or rspbuf
can be saved as well.
So, it could balance the impact of the 3 kzalloc().
So, if it looks promising, s.o. with the corresponding hardware should
make some measurements on memory and CPU usage.
---
drivers/nvme/host/fc.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c
index 5d57a042dbca..2d3c54838496 100644
--- a/drivers/nvme/host/fc.c
+++ b/drivers/nvme/host/fc.c
@@ -1475,6 +1475,8 @@ nvme_fc_xmt_ls_rsp_done(struct nvmefc_ls_rsp *lsrsp)
fc_dma_unmap_single(lport->dev, lsop->rspdma,
sizeof(*lsop->rspbuf), DMA_TO_DEVICE);
+ kfree(lsop->rspbuf);
+ kfree(lsop->rqstbuf);
kfree(lsop);
nvme_fc_rport_put(rport);
@@ -1751,20 +1753,17 @@ nvme_fc_rcv_ls_req(struct nvme_fc_remote_port *portptr,
goto out_put;
}
- lsop = kzalloc(sizeof(*lsop) +
- sizeof(union nvmefc_ls_requests) +
- sizeof(union nvmefc_ls_responses),
- GFP_KERNEL);
- if (!lsop) {
+ lsop = kzalloc(sizeof(*lsop), GFP_KERNEL);
+ lsop->rqstbuf = kzalloc(sizeof(*lsop->rqstbuf), GFP_KERNEL);
+ lsop->rspbuf = kzalloc(sizeof(*lsop->rspbuf), GFP_KERNEL);
+ if (!lsop || !lsop->rqstbuf || !lsop->rspbuf) {
dev_info(lport->dev,
"RCV %s LS failed: No memory\n",
(w0->ls_cmd <= NVME_FC_LAST_LS_CMD_VALUE) ?
nvmefc_ls_names[w0->ls_cmd] : "");
ret = -ENOMEM;
- goto out_put;
+ goto out_free;
}
- lsop->rqstbuf = (union nvmefc_ls_requests *)&lsop[1];
- lsop->rspbuf = (union nvmefc_ls_responses *)&lsop->rqstbuf[1];
lsop->rspdma = fc_dma_map_single(lport->dev, lsop->rspbuf,
sizeof(*lsop->rspbuf),
@@ -1801,6 +1800,8 @@ nvme_fc_rcv_ls_req(struct nvme_fc_remote_port *portptr,
fc_dma_unmap_single(lport->dev, lsop->rspdma,
sizeof(*lsop->rspbuf), DMA_TO_DEVICE);
out_free:
+ kfree(lsop->rspbuf);
+ kfree(lsop->rqstbuf);
kfree(lsop);
out_put:
nvme_fc_rport_put(rport);
--
2.34.1
More information about the Linux-nvme
mailing list