[PATCH 09/11] nvmet: Implement basic In-Band Authentication

[Max Gurtovoy]

Hi Hannes,

On 5/18/2022 2:22 PM, Hannes Reinecke wrote:
> Implement NVMe-oF In-Band authentication according to NVMe TPAR 8006.
> This patch adds three additional configfs entries 'dhchap_key',
> 'dhchap_ctrl_key', and 'dhchap_hash' to the 'host' configfs directory.
> The 'dhchap_key' and 'dhchap_ctrl_key' entries need to be in the ASCII
> format as specified in NVMe Base Specification v2.0 section 8.13.5.8
> 'Secret representation'.
> 'dhchap_hash' defaults to 'hmac(sha256)', and can be written to to
> switch to a different HMAC algorithm.
>
> Signed-off-by: Hannes Reinecke <hare at suse.de>
> ---
>   drivers/nvme/target/Kconfig            |  12 +
>   drivers/nvme/target/Makefile           |   1 +
>   drivers/nvme/target/admin-cmd.c        |   2 +
>   drivers/nvme/target/auth.c             | 367 ++++++++++++++++++
>   drivers/nvme/target/configfs.c         | 107 +++++-
>   drivers/nvme/target/core.c             |  11 +
>   drivers/nvme/target/fabrics-cmd-auth.c | 491 +++++++++++++++++++++++++
>   drivers/nvme/target/fabrics-cmd.c      |  38 +-
>   drivers/nvme/target/nvmet.h            |  62 ++++
>   9 files changed, 1088 insertions(+), 3 deletions(-)
>   create mode 100644 drivers/nvme/target/auth.c
>   create mode 100644 drivers/nvme/target/fabrics-cmd-auth.c
>
> diff --git a/drivers/nvme/target/Kconfig b/drivers/nvme/target/Kconfig
> index 973561c93888..e569319be679 100644
> --- a/drivers/nvme/target/Kconfig
> +++ b/drivers/nvme/target/Kconfig
> @@ -83,3 +83,15 @@ config NVME_TARGET_TCP
>   	  devices over TCP.
>   
>   	  If unsure, say N.
> +
> +config NVME_TARGET_AUTH
> +	bool "NVMe over Fabrics In-band Authentication support"
> +	depends on NVME_TARGET
> +	depends on NVME_AUTH
> +	select CRYPTO_HMAC
> +	select CRYPTO_SHA256
> +	select CRYPTO_SHA512
> +	help
> +	  This enables support for NVMe over Fabrics In-band Authentication
> +
> +	  If unsure, say N.
> diff --git a/drivers/nvme/target/Makefile b/drivers/nvme/target/Makefile
> index 9837e580fa7e..c66820102493 100644
> --- a/drivers/nvme/target/Makefile
> +++ b/drivers/nvme/target/Makefile
> @@ -13,6 +13,7 @@ nvmet-y		+= core.o configfs.o admin-cmd.o fabrics-cmd.o \
>   			discovery.o io-cmd-file.o io-cmd-bdev.o
>   nvmet-$(CONFIG_NVME_TARGET_PASSTHRU)	+= passthru.o
>   nvmet-$(CONFIG_BLK_DEV_ZONED)		+= zns.o
> +nvmet-$(CONFIG_NVME_TARGET_AUTH)	+= fabrics-cmd-auth.o auth.o
>   nvme-loop-y	+= loop.o
>   nvmet-rdma-y	+= rdma.o
>   nvmet-fc-y	+= fc.o
> diff --git a/drivers/nvme/target/admin-cmd.c b/drivers/nvme/target/admin-cmd.c
> index 31df40ac828f..fc8a957fad0a 100644
> --- a/drivers/nvme/target/admin-cmd.c
> +++ b/drivers/nvme/target/admin-cmd.c
> @@ -1018,6 +1018,8 @@ u16 nvmet_parse_admin_cmd(struct nvmet_req *req)
>   
>   	if (nvme_is_fabrics(cmd))
>   		return nvmet_parse_fabrics_admin_cmd(req);
> +	if (unlikely(!nvmet_check_auth_status(req)))
> +		return NVME_SC_AUTH_REQUIRED | NVME_SC_DNR;
>   	if (nvmet_is_disc_subsys(nvmet_req_subsys(req)))
>   		return nvmet_parse_discovery_cmd(req);
>   
> diff --git a/drivers/nvme/target/auth.c b/drivers/nvme/target/auth.c
> new file mode 100644
> index 000000000000..003c0faad7ff
> --- /dev/null
> +++ b/drivers/nvme/target/auth.c
> @@ -0,0 +1,367 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * NVMe over Fabrics DH-HMAC-CHAP authentication.
> + * Copyright (c) 2020 Hannes Reinecke, SUSE Software Solutions.
> + * All rights reserved.
> + */
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/slab.h>
> +#include <linux/err.h>
> +#include <crypto/hash.h>
> +#include <linux/crc32.h>
> +#include <linux/base64.h>
> +#include <linux/ctype.h>
> +#include <linux/random.h>
> +#include <asm/unaligned.h>
> +
> +#include "nvmet.h"
> +#include "../host/auth.h"

maybe we can put the common stuff to include/linux/nvme-auth.h instead 
of doing ../host/auth.h ?