2 second nvme initialization delay regression in 5.18 [Was: Re: [bug report]nvme0: Admin Cmd(0x6), I/O Error (sct 0x0 / sc 0x2) MORE DNR observed during blktests]

[Jason A. Donenfeld]

Hi Monish,

On Thu, Jun 09, 2022 at 09:32:02AM +0000, R, Monish Kumar wrote:
> Hi Jason,
> 
> I would like to provide justification for this Samsung X5 SSD fix added.
> We were facing SSD enumeration issue after cold / warm reboot with device 
> connected ends up with probe failures.
> 
> When I debug on this issue, I could find that this device was not enumerating 
> once the system got booted. Moreover, we were facing this enumeration issue
> specific to this device. 
> 
> Based on analysis, due to deep power state of the device fails to enumerate.
> So, added the following quirks as a workaround fixe and it helps to enumerate the device after cold/warm reboot. If new Samsung X5 SSD's are working fine as expected, we can remove those 
> fix. 

FWIW, all of that should have been in the commit message. Also, "based
on analysis" - what analysis exactly? I have no way of thinking more
about the issue at hand other than, "Monish said things are like this in
a lab".

In any case, I believe the 970 ID predates that of the X5, and
destroying battery on those laptops and introducing boot time delays
isn't really okay. So let's just revert this until somebody can work out
better how to differentiate drives that need a quirk from drives that
don't need a quirk.

I sent this in: https://lore.kernel.org/lkml/20220609084051.4445-1-Jason@zx2c4.com/

Jason