[PATCH v8 11/11] dm: add power-of-2 zoned target for non-power-of-2 zoned devices
Damien Le Moal
damien.lemoal at opensource.wdc.com
Wed Jul 27 21:33:12 PDT 2022
On 7/28/22 01:22, Pankaj Raghav wrote:
> Only power-of-2(po2) zoned devices were supported in linux but now non
> power-of-2(npo2) zoned device support has been added to the block layer.
Please rephrase this spelling out "zone size" in the text. As mentioned
before, "power-of-2(po2) zoned devices" is very unclear to people not
familiar with zoned block devices.
>
> Filesystems such as F2FS and btrfs have support for zoned devices with
> po2 zone size assumption. Before adding native support for npo2 zoned
> devices, it was suggested to create a dm target for npo2 zoned device to
> appear as a po2 target so that file systems can initially work without any
> explicit changes by using this target.
>
> The design of this target is very simple: introduce gaps between the
> underlying device's zone size and the nearest po2 device zone size.
> Device's actual zone size becomes the zone capacity of the target and
> device's nearest po2 zone size becomes the target's zone size.
The design of this target is very simple: remap the device zone size to
the zone capacity and change the zone size to be the nearest power of 2
numner of sectors.
>
> For e.g., a device with a zone size/capacity of 3M will have an equivalent
> target layout as follows:
>
> Device layout :-
> zone capacity = 3M
> zone size = 3M
>
> |--------------|-------------|
> 0 3M 6M
>
> Target layout :-
> zone capacity=3M
> zone size = 4M
>
> |--------------|---|--------------|---|
> 0 3M 4M 7M 8M
>
> All IOs will be remapped from target to the actual device location.
That is what DM does... Instead of this obvious statement, explain how the
remapping is done.
>
> The area between target's zone capacity and zone size will be emulated
> in the target.
> The read IOs that fall in the emulated gap area will return 0 filled
> bio and all the other IOs in that area will result in an error.
> If a read IO span across the emulated area boundary, then the IOs are
> split across them. All other IO operations that span across the emulated
> area boundary will result in an error.
>
> The target can be easily created as follows:
> dmsetup create <label> --table '0 <size_sects> po2z /dev/nvme<id>'
0 -> <start offset> ? Or are you allowing only entire devices ?
>
> Signed-off-by: Pankaj Raghav <p.raghav at samsung.com>
> Suggested-by: Johannes Thumshirn <johannes.thumshirn at wdc.com>
> Suggested-by: Damien Le Moal <damien.lemoal at wdc.com>
> Suggested-by: Hannes Reinecke <hare at suse.de>
> ---
> drivers/md/Kconfig | 9 ++
> drivers/md/Makefile | 2 +
> drivers/md/dm-po2z-target.c | 261 ++++++++++++++++++++++++++++++++++
> drivers/md/dm-table.c | 13 +-
> drivers/md/dm-zone.c | 1 +
> include/linux/device-mapper.h | 9 ++
> 6 files changed, 292 insertions(+), 3 deletions(-)
> create mode 100644 drivers/md/dm-po2z-target.c
>
> diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig
> index 998a5cfdbc4e..d58ccfee765b 100644
> --- a/drivers/md/Kconfig
> +++ b/drivers/md/Kconfig
> @@ -518,6 +518,15 @@ config DM_FLAKEY
> help
> A target that intermittently fails I/O for debugging purposes.
>
> +config DM_PO2Z
Maybe DM_PO2_ZONE ?
or DM_ZONE_PO2SIZE ?
To be clearer...
> + tristate "Power-of-2 target for non power-of-2 zoned devices"
...for zoned block devices with a zone size that is not a power of 2
number of sectors.
> + depends on BLK_DEV_DM
> + depends on BLK_DEV_ZONED
> + help
> + A target that converts a zoned device with non power-of-2 zone size to
> + be power of 2. This is done by introducing gaps in between the zone
...to have zones with size equal to a power of 2 n umber of sectors. And
drop the "This done...".
How the target works and how to use it should be documented under
Documentation/admin-guide/device-mapper/
> + capacity and the power of 2 zone size.
> +
> config DM_VERITY
> tristate "Verity target support"
> depends on BLK_DEV_DM
> diff --git a/drivers/md/Makefile b/drivers/md/Makefile
> index 270f694850ec..98af4ed98f73 100644
> --- a/drivers/md/Makefile
> +++ b/drivers/md/Makefile
> @@ -26,6 +26,7 @@ dm-era-y += dm-era-target.o
> dm-clone-y += dm-clone-target.o dm-clone-metadata.o
> dm-verity-y += dm-verity-target.o
> dm-zoned-y += dm-zoned-target.o dm-zoned-metadata.o dm-zoned-reclaim.o
> +dm-po2z-y += dm-po2z-target.o
dm-po2zone ?
Spelling out "zone" makes things clearer I think.
>
> md-mod-y += md.o md-bitmap.o
> raid456-y += raid5.o raid5-cache.o raid5-ppl.o
> @@ -60,6 +61,7 @@ obj-$(CONFIG_DM_CRYPT) += dm-crypt.o
> obj-$(CONFIG_DM_DELAY) += dm-delay.o
> obj-$(CONFIG_DM_DUST) += dm-dust.o
> obj-$(CONFIG_DM_FLAKEY) += dm-flakey.o
> +obj-$(CONFIG_DM_PO2Z) += dm-po2z.o
> obj-$(CONFIG_DM_MULTIPATH) += dm-multipath.o dm-round-robin.o
> obj-$(CONFIG_DM_MULTIPATH_QL) += dm-queue-length.o
> obj-$(CONFIG_DM_MULTIPATH_ST) += dm-service-time.o
> diff --git a/drivers/md/dm-po2z-target.c b/drivers/md/dm-po2z-target.c
> new file mode 100644
> index 000000000000..e9c5b7d00eda
> --- /dev/null
> +++ b/drivers/md/dm-po2z-target.c
> @@ -0,0 +1,261 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2022 Samsung Electronics Co., Ltd.
> + */
> +
> +#include <linux/device-mapper.h>
> +
> +#define DM_MSG_PREFIX "po2z"
s/po2z/po2zone ?
> +
> +struct dm_po2z_target {
> + struct dm_dev *dev;
> + sector_t zone_size; /* Actual zone size of the underlying dev*/
> + sector_t zone_size_po2; /* zone_size rounded to the nearest po2 value */
> + sector_t zone_size_diff; /* diff between zone_size_po2 and zone_size */
> + u32 nr_zones;
s/u32/unsigned int. This is not a hw driver.
> +};
> +
> +static inline u32 npo2_zone_no(struct dm_po2z_target *dmh, sector_t sect)
> +{
> + return div64_u64(sect, dmh->zone_size);
> +}
> +
> +static inline u32 po2_zone_no(struct dm_po2z_target *dmh, sector_t sect)
> +{
> + return sect >> ilog2(dmh->zone_size_po2);
You could saves the shift as "zone_size_po2_shift" in struct dm_po2z_target.
> +}
> +
> +static inline sector_t target_to_device_sect(struct dm_po2z_target *dmh,
> + sector_t sect)
> +{
> + u32 zone_idx = po2_zone_no(dmh, sect);
> +
> + return sect - (zone_idx * dmh->zone_size_diff);
The idx variable seems unnecessary. And use unsgined int, not u32.
> +}
> +
> +static inline sector_t device_to_target_sect(struct dm_po2z_target *dmh,
> + sector_t sect)
> +{
> + u32 zone_idx = npo2_zone_no(dmh, sect);
> +
> + return sect + (zone_idx * dmh->zone_size_diff);
same.
> +}
> +
> +/*
> + * This target works on the complete zoned device. Partial mapping is not
> + * supported.
> + * Construct a zoned po2 logical device: <dev-path>
> + */
> +static int dm_po2z_ctr(struct dm_target *ti, unsigned int argc, char **argv)
> +{
> + struct dm_po2z_target *dmh = NULL;
> + int ret;
> + sector_t zone_size;
> + sector_t dev_capacity;
> +
> + if (argc < 1)
if (argc != 1) ?
> + return -EINVAL;
> +
> + dmh = kmalloc(sizeof(*dmh), GFP_KERNEL);
> + if (!dmh)
> + return -ENOMEM;
> +
> + ret = dm_get_device(ti, argv[0], dm_table_get_mode(ti->table),
> + &dmh->dev);
> +
> + if (ret) {
> + ti->error = "Device lookup failed";
> + return ret;
You are leaking dmh.
> + }
> +
> + zone_size = bdev_zone_sectors(dmh->dev->bdev);
> + dev_capacity = get_capacity(dmh->dev->bdev->bd_disk);
> + if (ti->len != dev_capacity || ti->begin) {
> + DMERR("%pg Partial mapping of the target not supported",
> + dmh->dev->bdev);
dmh is leaked.
> + return -EINVAL;
> + }
> +
> + if (is_power_of_2(zone_size)) {
> + DMERR("%pg: this target is not useful for power-of-2 zoned devices",
> + dmh->dev->bdev);
> + return -EINVAL;
Same here.
And as suggested before, we could simply warn here but let the target be
created. If used with a power of 2 zone size device, it should still work.
> + }
> +
> + dmh->zone_size = zone_size;
> + dmh->zone_size_po2 = 1 << get_count_order_long(zone_size);
> + dmh->zone_size_diff = dmh->zone_size_po2 - dmh->zone_size;
> + ti->private = dmh;
> + dmh->nr_zones = npo2_zone_no(dmh, ti->len);
> + ti->len = dmh->zone_size_po2 * dmh->nr_zones;
> +
> + return 0;
> +}
> +
> +static int dm_po2z_report_zones_cb(struct blk_zone *zone, unsigned int idx,
> + void *data)
> +{
> + struct dm_report_zones_args *args = data;
> + struct dm_po2z_target *dmh = args->tgt->private;
> +
> + zone->start = device_to_target_sect(dmh, zone->start);
> + zone->wp = device_to_target_sect(dmh, zone->wp);
You could simplify this to a single call to device_to_target_sect() by
saving the diff between device zone start and remapped zone start and add
that diff to the wp field.
> + zone->len = dmh->zone_size_po2;
> + args->next_sector = zone->start + zone->len;
> +
> + return args->orig_cb(zone, args->zone_idx++, args->orig_data);
> +}
> +
> +static int dm_po2z_report_zones(struct dm_target *ti,
> + struct dm_report_zones_args *args,
> + unsigned int nr_zones)
> +{
> + struct dm_po2z_target *dmh = ti->private;
> + sector_t sect = po2_zone_no(dmh, args->next_sector) * dmh->zone_size;
> +
> + return blkdev_report_zones(dmh->dev->bdev, sect, nr_zones,
> + dm_po2z_report_zones_cb, args);
> +}
> +
> +static int dm_po2z_end_io(struct dm_target *ti, struct bio *bio,
> + blk_status_t *error)
> +{
> + struct dm_po2z_target *dmh = ti->private;
> +
> + if (bio->bi_status == BLK_STS_OK && bio_op(bio) == REQ_OP_ZONE_APPEND)
> + bio->bi_iter.bi_sector =
> + device_to_target_sect(dmh, bio->bi_iter.bi_sector);
> +
> + return DM_ENDIO_DONE;
> +}
> +
> +static void dm_po2z_io_hints(struct dm_target *ti, struct queue_limits *limits)
> +{
> + struct dm_po2z_target *dmh = ti->private;
> +
> + limits->chunk_sectors = dmh->zone_size_po2;
> +}
> +
> +static bool bio_across_emulated_zone_area(struct dm_po2z_target *dmh,
> + struct bio *bio)
> +{
> + u32 zone_idx = po2_zone_no(dmh, bio->bi_iter.bi_sector);
> + sector_t size = bio->bi_iter.bi_size >> SECTOR_SHIFT;
Rename that to nr_sectors to be clear about the unit.
> +
> + return (bio->bi_iter.bi_sector - (zone_idx * dmh->zone_size_po2) +
> + size) > dmh->zone_size;
This is hard to read and actually seems very wrong. Shouldn't this be simply:
return bio->bi_iter.bi_sector + nr_sectors >
zone_idx * dmh->zone_size_po2 + dmh->zone_size;
Thatis, check that the BIO goes beyond the zone capacity of the target.
?
> +}
> +
> +static int dm_po2z_map_read(struct dm_po2z_target *dmh, struct bio *bio)
> +{
> + sector_t start_sect, size, relative_sect_in_zone, split_io_pos;
> + u32 zone_idx;
> +
> + /*
> + * Read does not extend into the emulated zone area (area between
> + * zone capacity and zone size)
> + */
> + if (!bio_across_emulated_zone_area(dmh, bio)) {
hu... why not use dm_accept_partial_bio() in dm_po2z_map() to never have
to deal with this here ? That is, dm_po2z_map_read() is called for any
read BIO fully within the zone capacity. And create a
dm_po2z_map_read_zero() helper for any read BIO that is after the zone
capacity. Way simpler I think.
> + bio->bi_iter.bi_sector =
> + target_to_device_sect(dmh, bio->bi_iter.bi_sector);
> + return DM_MAPIO_REMAPPED;
> + }
> +
> + start_sect = bio->bi_iter.bi_sector;
> + size = bio->bi_iter.bi_size >> SECTOR_SHIFT;
> + zone_idx = po2_zone_no(dmh, start_sect);
> + relative_sect_in_zone = start_sect - (zone_idx * dmh->zone_size_po2);
> +
> + /*
> + * If the starting sector is in the emulated area then fill
> + * all the bio with zeros. If bio is across emulated zone boundary,
> + * split the bio across boundaries and fill zeros only for the
> + * bio that is between the zone capacity and the zone size.
> + */
> + if (relative_sect_in_zone < dmh->zone_size &&
> + ((relative_sect_in_zone + size) > dmh->zone_size)) {
> + split_io_pos = (zone_idx * dmh->zone_size_po2) + dmh->zone_size;
> + dm_accept_partial_bio(bio, split_io_pos - start_sect);
See above. Do that in dm_po2z_map(). This will simplify this function.
> + bio->bi_iter.bi_sector = target_to_device_sect(dmh, start_sect);
> +
> + return DM_MAPIO_REMAPPED;
> + } else if (relative_sect_in_zone >= dmh->zone_size &&
> + ((relative_sect_in_zone + size) > dmh->zone_size_po2)) {
No need for the else after return. And this can NEVER happen since BIOs
can never cross zone boundaries.
> + split_io_pos = (zone_idx + 1) * dmh->zone_size_po2;
> + dm_accept_partial_bio(bio, split_io_pos - start_sect);
> + }
> +
> + zero_fill_bio(bio);
> + bio_endio(bio);
> + return DM_MAPIO_SUBMITTED;
> +}
> +
> +static int dm_po2z_map(struct dm_target *ti, struct bio *bio)
> +{
> + struct dm_po2z_target *dmh = ti->private;
> +
> + bio_set_dev(bio, dmh->dev->bdev);
> + if (bio_sectors(bio) || op_is_zone_mgmt(bio_op(bio))) {
> + /*
> + * Read operation on the emulated zone area (between zone capacity
> + * and zone size) will fill the bio with zeroes. Any other operation
> + * in the emulated area should return an error.
> + */
> + if (bio_op(bio) == REQ_OP_READ)
> + return dm_po2z_map_read(dmh, bio);
> +
> + if (!bio_across_emulated_zone_area(dmh, bio)) {
> + bio->bi_iter.bi_sector = target_to_device_sect(dmh,
> + bio->bi_iter.bi_sector);
> + return DM_MAPIO_REMAPPED;
> + }
> + return DM_MAPIO_KILL;
> + }
> + return DM_MAPIO_REMAPPED;
> +}
> +
> +static int dm_po2z_iterate_devices(struct dm_target *ti,
> + iterate_devices_callout_fn fn, void *data)
> +{
> + struct dm_po2z_target *dmh = ti->private;
> + sector_t len = dmh->nr_zones * dmh->zone_size;
> +
> + return fn(ti, dmh->dev, 0, len, data);
> +}
> +
> +static struct target_type dm_po2z_target = {
> + .name = "po2z",
> + .version = { 1, 0, 0 },
> + .features = DM_TARGET_ZONED_HM | DM_TARGET_EMULATED_ZONES,
> + .map = dm_po2z_map,
> + .end_io = dm_po2z_end_io,
> + .report_zones = dm_po2z_report_zones,
> + .iterate_devices = dm_po2z_iterate_devices,
> + .module = THIS_MODULE,
> + .io_hints = dm_po2z_io_hints,
> + .ctr = dm_po2z_ctr,
> +};
> +
> +static int __init dm_po2z_init(void)
> +{
> + int r = dm_register_target(&dm_po2z_target);
> +
> + if (r < 0)
> + DMERR("register failed %d", r);
> +
> + return r;
Simplify:
return dm_register_target(&dm_po2z_target);
> +}
> +
> +static void __exit dm_po2z_exit(void)
> +{
> + dm_unregister_target(&dm_po2z_target);
> +}
> +
> +/* Module hooks */
> +module_init(dm_po2z_init);
> +module_exit(dm_po2z_exit);
> +
> +MODULE_DESCRIPTION(DM_NAME "power-of-2 zoned target");
> +MODULE_AUTHOR("Pankaj Raghav <p.raghav at samsung.com>");
> +MODULE_LICENSE("GPL");
> +
the changes below should be a different prep patch.
> diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
> index 534fddfc2b42..d77feff124af 100644
> --- a/drivers/md/dm-table.c
> +++ b/drivers/md/dm-table.c
> @@ -1614,13 +1614,20 @@ static bool dm_table_supports_zoned_model(struct dm_table *t,
> return true;
> }
>
> -static int device_not_matches_zone_sectors(struct dm_target *ti, struct dm_dev *dev,
> +/*
> + * Callback function to check for device zone sector across devices. If the
> + * DM_TARGET_EMULATED_ZONES target feature flag is not set, then the target
> + * should have the same zone sector as the underlying devices.
> + */
> +static int check_valid_device_zone_sectors(struct dm_target *ti, struct dm_dev *dev,
> sector_t start, sector_t len, void *data)
> {
> unsigned int *zone_sectors = data;
>
> - if (!bdev_is_zoned(dev->bdev))
> + if (!bdev_is_zoned(dev->bdev) ||
> + dm_target_supports_emulated_zones(ti->type))
> return 0;
> +
> return bdev_zone_sectors(dev->bdev) != *zone_sectors;
> }
>
> @@ -1646,7 +1653,7 @@ static int validate_hardware_zoned_model(struct dm_table *t,
> if (!zone_sectors)
> return -EINVAL;
>
> - if (dm_table_any_dev_attr(t, device_not_matches_zone_sectors, &zone_sectors)) {
> + if (dm_table_any_dev_attr(t, check_valid_device_zone_sectors, &zone_sectors)) {
> DMERR("%s: zone sectors is not consistent across all zoned devices",
> dm_device_name(t->md));
> return -EINVAL;
> diff --git a/drivers/md/dm-zone.c b/drivers/md/dm-zone.c
> index 31c16aafdbfc..2b6b3883471f 100644
> --- a/drivers/md/dm-zone.c
> +++ b/drivers/md/dm-zone.c
> @@ -302,6 +302,7 @@ int dm_set_zones_restrictions(struct dm_table *t, struct request_queue *q)
> if (dm_table_supports_zone_append(t)) {
> clear_bit(DMF_EMULATE_ZONE_APPEND, &md->flags);
> dm_cleanup_zoned_dev(md);
> +
> return 0;
> }
>
> diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
> index 920085dd7f3b..7dbd28b8de01 100644
> --- a/include/linux/device-mapper.h
> +++ b/include/linux/device-mapper.h
> @@ -294,6 +294,15 @@ struct target_type {
> #define dm_target_supports_mixed_zoned_model(type) (false)
> #endif
>
> +#ifdef CONFIG_BLK_DEV_ZONED
> +#define DM_TARGET_EMULATED_ZONES 0x00000400
> +#define dm_target_supports_emulated_zones(type) \
> + ((type)->features & DM_TARGET_EMULATED_ZONES)
> +#else
> +#define DM_TARGET_EMULATED_ZONES 0x00000000
> +#define dm_target_supports_emulated_zones(type) (false)
> +#endif
> +
> struct dm_target {
> struct dm_table *table;
> struct target_type *type;
--
Damien Le Moal
Western Digital Research
More information about the Linux-nvme
mailing list