[RFC] nvme-tcp: Handle number of queue changes
Daniel Wagner
dwagner at suse.de
Fri Aug 12 07:28:24 PDT 2022
On reconnect, the number of queues might have changed. In the case
where the old number of queues is lower than the new one, we try to
restart the new number of queues. At this point though, the tagset
is has not yet been updated and the operations fails.
Thus, on reconnect only start only the old number of queues, then update
the tag set and then start the rest of the newly added queues.
Signed-off-by: Daniel Wagner <dwagner at suse.de>
---
We got a report from our customer that a firmware upgrade on the
storage array is able to 'break' host. This is caused a change of
number of queues which the target supports after a reconnect.
Let's assume the number of queues is 8 and all is working fine. Then
the connection is dropped and the host starts to try to
reconnect. Eventually, this succeeds but now the new number of queues
is 10:
nvme0: creating 8 I/O queues.
nvme0: mapped 8/0/0 default/read/poll queues.
nvme0: new ctrl: NQN "nvmet-test", addr 10.100.128.29:4420
nvme0: queue 0: timeout request 0x0 type 4
nvme0: starting error recovery
nvme0: failed nvme_keep_alive_end_io error=10
nvme0: Reconnecting in 10 seconds...
nvme0: failed to connect socket: -110
nvme0: Failed reconnect attempt 1
nvme0: Reconnecting in 10 seconds...
nvme0: creating 10 I/O queues.
nvme0: Connect command failed, error wo/DNR bit: -16389
nvme0: failed to connect queue: 9 ret=-5
nvme0: Failed reconnect attempt 2
As you can see queue number 9 is not able to connect.
As the order of starting and unfreezing is important we can't just
move the start of the queues after the tagset update. So my stupid
idea was to start just the older number of queues and then the rest.
This seems work:
nvme nvme0: creating 4 I/O queues.
nvme nvme0: mapped 4/0/0 default/read/poll queues.
nvme_tcp_start_io_queues nr_hw_queues 4 queue_count 5 qcnt 5
nvme_tcp_start_io_queues nr_hw_queues 4 queue_count 5 qcnt 5
nvme nvme0: new ctrl: NQN "nvmet-test", addr 10.100.128.29:4420
nvme nvme0: queue 0: timeout request 0x0 type 4
nvme nvme0: starting error recovery
nvme0: Keep Alive(0x18), Unknown (sct 0x3 / sc 0x71)
nvme nvme0: failed nvme_keep_alive_end_io error=10
nvme nvme0: Reconnecting in 10 seconds...
nvme nvme0: creating 6 I/O queues.
nvme_tcp_start_io_queues nr_hw_queues 4 queue_count 7 qcnt 5
nvme nvme0: mapped 6/0/0 default/read/poll queues.
nvme_tcp_start_io_queues nr_hw_queues 6 queue_count 7 qcnt 7
nvme nvme0: Successfully reconnected (1 attempt)
nvme nvme0: starting error recovery
nvme0: Keep Alive(0x18), Unknown (sct 0x3 / sc 0x71)
nvme nvme0: failed nvme_keep_alive_end_io error=10
nvme nvme0: Reconnecting in 10 seconds...
nvme nvme0: creating 4 I/O queues.
nvme_tcp_start_io_queues nr_hw_queues 6 queue_count 5 qcnt 5
nvme nvme0: mapped 4/0/0 default/read/poll queues.
nvme_tcp_start_io_queues nr_hw_queues 4 queue_count 5 qcnt 5
nvme nvme0: Successfully reconnected (1 attempt)
And yes, the patch per se is ugly, but I didn't want to reorganize
code at this point. It just an illustration of my idea.
Feedback highly appreciated!
Thanks,
Daniel
drivers/nvme/host/tcp.c | 23 ++++++++++++++++++-----
1 file changed, 18 insertions(+), 5 deletions(-)
diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c
index e82dcfcda29b..177d2f5d9047 100644
--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -1671,6 +1671,9 @@ static int nvme_tcp_start_queue(struct nvme_ctrl *nctrl, int idx)
struct nvme_tcp_ctrl *ctrl = to_tcp_ctrl(nctrl);
int ret;
+ if (test_bit(NVME_TCP_Q_LIVE, &ctrl->queues[idx].flags))
+ return 0;
+
if (idx)
ret = nvmf_connect_io_queue(nctrl, idx);
else
@@ -1759,12 +1762,18 @@ static void nvme_tcp_stop_io_queues(struct nvme_ctrl *ctrl)
nvme_tcp_stop_queue(ctrl, i);
}
-static int nvme_tcp_start_io_queues(struct nvme_ctrl *ctrl)
+static int nvme_tcp_start_io_queues(struct nvme_ctrl *nctrl)
{
- int i, ret;
+ struct nvme_tcp_ctrl *ctrl = to_tcp_ctrl(nctrl);
+ int i, ret, qcnt;
- for (i = 1; i < ctrl->queue_count; i++) {
- ret = nvme_tcp_start_queue(ctrl, i);
+ qcnt = min(ctrl->tag_set.nr_hw_queues + 1, nctrl->queue_count);
+
+ dev_info(nctrl->device, "nr_hw_queues %d queue_count %d qcnt %d\n",
+ ctrl->tag_set.nr_hw_queues, nctrl->queue_count, qcnt);
+
+ for (i = 1; i < qcnt; i++) {
+ ret = nvme_tcp_start_queue(nctrl, i);
if (ret)
goto out_stop_queues;
}
@@ -1773,7 +1782,7 @@ static int nvme_tcp_start_io_queues(struct nvme_ctrl *ctrl)
out_stop_queues:
for (i--; i >= 1; i--)
- nvme_tcp_stop_queue(ctrl, i);
+ nvme_tcp_stop_queue(nctrl, i);
return ret;
}
@@ -1934,6 +1943,10 @@ static int nvme_tcp_configure_io_queues(struct nvme_ctrl *ctrl, bool new)
nvme_unfreeze(ctrl);
}
+ ret = nvme_tcp_start_io_queues(ctrl);
+ if (ret)
+ goto out_cleanup_connect_q;
+
return 0;
out_wait_freeze_timed_out:
--
2.37.1
More information about the Linux-nvme
mailing list