[PATCH 10/12] nvmet: Implement basic In-Band Authentication

[Hannes Reinecke]

On 11/22/21 12:59 PM, Sagi Grimberg wrote:
> 
>> +void nvmet_execute_auth_send(struct nvmet_req *req)
>> +{
>> +    struct nvmet_ctrl *ctrl = req->sq->ctrl;
>> +    struct nvmf_auth_dhchap_success2_data *data;
>> +    void *d;
>> +    u32 tl;
>> +    u16 status = 0;
>> +
>> +    if (req->cmd->auth_send.secp !=
>> NVME_AUTH_DHCHAP_PROTOCOL_IDENTIFIER) {
>> +        status = NVME_SC_INVALID_FIELD | NVME_SC_DNR;
>> +        req->error_loc =
>> +            offsetof(struct nvmf_auth_send_command, secp);
>> +        goto done;
>> +    }
>> +    if (req->cmd->auth_send.spsp0 != 0x01) {
>> +        status = NVME_SC_INVALID_FIELD | NVME_SC_DNR;
>> +        req->error_loc =
>> +            offsetof(struct nvmf_auth_send_command, spsp0);
>> +        goto done;
>> +    }
>> +    if (req->cmd->auth_send.spsp1 != 0x01) {
>> +        status = NVME_SC_INVALID_FIELD | NVME_SC_DNR;
>> +        req->error_loc =
>> +            offsetof(struct nvmf_auth_send_command, spsp1);
>> +        goto done;
>> +    }
>> +    tl = le32_to_cpu(req->cmd->auth_send.tl);
>> +    if (!tl) {
>> +        status = NVME_SC_INVALID_FIELD | NVME_SC_DNR;
>> +        req->error_loc =
>> +            offsetof(struct nvmf_auth_send_command, tl);
>> +        goto done;
>> +    }
>> +    if (!nvmet_check_transfer_len(req, tl)) {
>> +        pr_debug("%s: transfer length mismatch (%u)\n", __func__, tl);
>> +        return;
>> +    }
>> +
>> +    d = kmalloc(tl, GFP_KERNEL);
>> +    if (!d) {
>> +        status = NVME_SC_INTERNAL;
>> +        goto done;
>> +    }
>> +
>> +    status = nvmet_copy_from_sgl(req, 0, d, tl);
>> +    if (status) {
>> +        kfree(d);
>> +        goto done;
>> +    }
>> +
>> +    data = d;
>> +    pr_debug("%s: ctrl %d qid %d type %d id %d step %x\n", __func__,
>> +         ctrl->cntlid, req->sq->qid, data->auth_type, data->auth_id,
>> +         req->sq->dhchap_step);
>> +    if (data->auth_type != NVME_AUTH_COMMON_MESSAGES &&
>> +        data->auth_type != NVME_AUTH_DHCHAP_MESSAGES)
>> +        goto done_failure1;
>> +    if (data->auth_type == NVME_AUTH_COMMON_MESSAGES) {
>> +        if (data->auth_id == NVME_AUTH_DHCHAP_MESSAGE_NEGOTIATE) {
>> +            /* Restart negotiation */
>> +            pr_debug("%s: ctrl %d qid %d reset negotiation\n", __func__,
>> +                 ctrl->cntlid, req->sq->qid);
>> +            if (!req->sq->qid) {
>> +                status = nvmet_setup_auth(ctrl);
> 
> Aren't you leaking memory here?
>
Hmm. Might. Will be checking.

Cheers,

Hannes
-- 
Dr. Hannes Reinecke		        Kernel Storage Architect
hare at suse.de			               +49 911 74053 688
SUSE Software Solutions Germany GmbH, 90409 Nürnberg
GF: F. Imendörffer, HRB 36809 (AG Nürnberg)