[PATCH v2] nvme: fix write zeroes pi

[Klaus Jensen]

From: Klaus Jensen <k.jensen at samsung.com>

Write Zeroes sets PRACT when block integrity is enabled (as it should),
but neglects to also set the reftag which is expected by reads. This
causes protection errors on reads.

Fix this by setting the reftag for type 1 and 2 (for type 3, reads will
not check the reftag).

Signed-off-by: Klaus Jensen <k.jensen at samsung.com>
---
v2: also set PRACT for type 3...

 drivers/nvme/host/core.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 3825b596ca16..41885ecc69fc 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -914,10 +914,19 @@ static inline blk_status_t nvme_setup_write_zeroes(struct nvme_ns *ns,
 		cpu_to_le64(nvme_sect_to_lba(ns, blk_rq_pos(req)));
 	cmnd->write_zeroes.length =
 		cpu_to_le16((blk_rq_bytes(req) >> ns->lba_shift) - 1);
-	if (nvme_ns_has_pi(ns))
+
+	if (nvme_ns_has_pi(ns)) {
 		cmnd->write_zeroes.control = cpu_to_le16(NVME_RW_PRINFO_PRACT);
-	else
-		cmnd->write_zeroes.control = 0;
+
+		switch (ns->pi_type) {
+		case NVME_NS_DPS_PI_TYPE1:
+		case NVME_NS_DPS_PI_TYPE2:
+			cmnd->write_zeroes.reftag =
+				cpu_to_le32(t10_pi_ref_tag(req));
+			break;
+		}
+	}
+
 	return BLK_STS_OK;
 }
 
-- 
2.33.1