[RFC PATCH 3/8] nvme: add support for the Verify command
Chaitanya Kulkarni
chaitanyak at nvidia.com
Wed Nov 3 23:46:29 PDT 2021
From: Chaitanya Kulkarni <kch at nvidia.com>
Allow verify operations (REQ_OP_VERIFY) on the block device, if the
device supports optional command bit set for verify. Add support
to setup verify command. Set maximum possible verify sectors in one
verify command according to maximum hardware sectors supported by the
controller.
Signed-off-by: Chaitanya Kulkarni <kch at nvidia.com>
---
drivers/nvme/host/core.c | 39 +++++++++++++++++++++++++++++++++++++++
include/linux/nvme.h | 19 +++++++++++++++++++
2 files changed, 58 insertions(+)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 546a10407385..250647c3bb7b 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -801,6 +801,19 @@ static inline blk_status_t nvme_setup_write_zeroes(struct nvme_ns *ns,
return BLK_STS_OK;
}
+static inline blk_status_t nvme_setup_verify(struct nvme_ns *ns,
+ struct request *req, struct nvme_command *cmnd)
+{
+ cmnd->verify.opcode = nvme_cmd_verify;
+ cmnd->verify.nsid = cpu_to_le32(ns->head->ns_id);
+ cmnd->verify.slba =
+ cpu_to_le64(nvme_sect_to_lba(ns, blk_rq_pos(req)));
+ cmnd->verify.length =
+ cpu_to_le16((blk_rq_bytes(req) >> ns->lba_shift) - 1);
+ cmnd->verify.control = 0;
+ return BLK_STS_OK;
+}
+
static inline blk_status_t nvme_setup_rw(struct nvme_ns *ns,
struct request *req, struct nvme_command *cmnd,
enum nvme_opcode op)
@@ -904,6 +917,9 @@ blk_status_t nvme_setup_cmd(struct nvme_ns *ns, struct request *req,
case REQ_OP_WRITE_ZEROES:
ret = nvme_setup_write_zeroes(ns, req, cmd);
break;
+ case REQ_OP_VERIFY:
+ ret = nvme_setup_verify(ns, req, cmd);
+ break;
case REQ_OP_DISCARD:
ret = nvme_setup_discard(ns, req, cmd);
break;
@@ -1974,6 +1990,28 @@ static void nvme_config_write_zeroes(struct gendisk *disk, struct nvme_ns *ns)
nvme_lba_to_sect(ns, max_blocks));
}
+static void nvme_config_verify(struct gendisk *disk, struct nvme_ns *ns)
+{
+ u64 max_blocks;
+
+ if (!(ns->ctrl->oncs & NVME_CTRL_ONCS_VERIFY))
+ return;
+
+ if (ns->ctrl->max_hw_sectors == UINT_MAX)
+ max_blocks = (u64)USHRT_MAX + 1;
+ else
+ max_blocks = ns->ctrl->max_hw_sectors + 1;
+
+ /* keep same as discard */
+ if (blk_queue_flag_test_and_set(QUEUE_FLAG_VERIFY, disk->queue))
+ return;
+
+ blk_queue_max_verify_sectors(disk->queue,
+ nvme_lba_to_sect(ns, max_blocks));
+
+}
+
+
static bool nvme_ns_ids_valid(struct nvme_ns_ids *ids)
{
return !uuid_is_null(&ids->uuid) ||
@@ -2144,6 +2182,7 @@ static void nvme_update_disk_info(struct gendisk *disk,
nvme_config_discard(disk, ns);
nvme_config_write_zeroes(disk, ns);
+ nvme_config_verify(disk, ns);
set_disk_ro(disk, (id->nsattr & NVME_NS_ATTR_RO) ||
test_bit(NVME_NS_FORCE_RO, &ns->flags));
diff --git a/include/linux/nvme.h b/include/linux/nvme.h
index b08787cd0881..14925602726a 100644
--- a/include/linux/nvme.h
+++ b/include/linux/nvme.h
@@ -318,6 +318,7 @@ enum {
NVME_CTRL_ONCS_WRITE_UNCORRECTABLE = 1 << 1,
NVME_CTRL_ONCS_DSM = 1 << 2,
NVME_CTRL_ONCS_WRITE_ZEROES = 1 << 3,
+ NVME_CTRL_ONCS_VERIFY = 1 << 7,
NVME_CTRL_ONCS_RESERVATIONS = 1 << 5,
NVME_CTRL_ONCS_TIMESTAMP = 1 << 6,
NVME_CTRL_VWC_PRESENT = 1 << 0,
@@ -890,6 +891,23 @@ struct nvme_write_zeroes_cmd {
__le16 appmask;
};
+struct nvme_verify_cmd {
+ __u8 opcode;
+ __u8 flags;
+ __u16 command_id;
+ __le32 nsid;
+ __u64 rsvd2;
+ __le64 metadata;
+ union nvme_data_ptr dptr;
+ __le64 slba;
+ __le16 length;
+ __le16 control;
+ __le32 rsvd3;
+ __le32 reftag;
+ __le16 eapptag;
+ __le16 eappmask;
+};
+
enum nvme_zone_mgmt_action {
NVME_ZONE_CLOSE = 0x1,
NVME_ZONE_FINISH = 0x2,
@@ -1411,6 +1429,7 @@ struct nvme_command {
struct nvme_format_cmd format;
struct nvme_dsm_cmd dsm;
struct nvme_write_zeroes_cmd write_zeroes;
+ struct nvme_verify_cmd verify;
struct nvme_zone_mgmt_send_cmd zms;
struct nvme_zone_mgmt_recv_cmd zmr;
struct nvme_abort_cmd abort;
--
2.22.1
More information about the Linux-nvme
mailing list