[PATCH v2 10/22] mpool: add mlog IO utility routines
Nabeel M Mohamed
nmeeramohide at micron.com
Mon Oct 12 12:27:24 EDT 2020
Adds buffer management routines used by the mlog IO path.
Mlog objects are containers for record logging. An mlog is
structured as a series of consecutive log blocks where each
log block is exactly one sector in size. Records of
arbitrary size can be appended to an mlog until it's full.
Mlog uses a flush set algorithm for implementing multi-sector
append and read buffers. A flush set is one or more sector-
size memory buffers containing consecutive log block data
with newly appended records written together in a single
logical I/O. The flush set algorithm maintains flush set
identifiers in the headers of the log blocks comprising the
append buffer and handles failures when writing these log
blocks.
The flush set grows up to the append buffer size providing
better throughput for async appends. Once the flush set is
full or when the client issues a synchronous append or mlog
flush, the flush set is written to media and the buffer pages
are freed/prepared for the next append depending on the I/O
outcome.
The read buffer is also provisioned like the append buffer.
The read buffer management is optimized for the expected use
cases, which is open a log, read once to load persisted state
into memory and thereafter only append while open. The log
blocks are loaded into the read buffer up to but not including
the offset of the first log block in the append buffer.
Co-developed-by: Greg Becker <gbecker at micron.com>
Signed-off-by: Greg Becker <gbecker at micron.com>
Co-developed-by: Pierre Labat <plabat at micron.com>
Signed-off-by: Pierre Labat <plabat at micron.com>
Co-developed-by: John Groves <jgroves at micron.com>
Signed-off-by: John Groves <jgroves at micron.com>
Signed-off-by: Nabeel M Mohamed <nmeeramohide at micron.com>
---
drivers/mpool/mlog_utils.c | 1352 ++++++++++++++++++++++++++++++++++++
drivers/mpool/mlog_utils.h | 63 ++
2 files changed, 1415 insertions(+)
create mode 100644 drivers/mpool/mlog_utils.c
create mode 100644 drivers/mpool/mlog_utils.h
diff --git a/drivers/mpool/mlog_utils.c b/drivers/mpool/mlog_utils.c
new file mode 100644
index 000000000000..3fae46b5a1c3
--- /dev/null
+++ b/drivers/mpool/mlog_utils.c
@@ -0,0 +1,1352 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015-2020 Micron Technology, Inc. All rights reserved.
+ */
+
+#include <linux/mm.h>
+#include <linux/log2.h>
+#include <linux/blk_types.h>
+#include <linux/rbtree.h>
+#include <linux/slab.h>
+#include <asm/page.h>
+
+#include "assert.h"
+#include "mpool_printk.h"
+
+#include "pmd_obj.h"
+#include "mpcore.h"
+#include "mlog.h"
+#include "mlog_utils.h"
+
+#define mlpriv2layout(_ptr) \
+ ((struct pmd_layout *)((char *)(_ptr) - offsetof(struct pmd_layout, eld_priv)))
+
+bool mlog_objid(u64 objid)
+{
+ return objid && pmd_objid_type(objid) == OMF_OBJ_MLOG;
+}
+
+/**
+ * mlog2layout() - convert opaque mlog handle to pmd_layout
+ *
+ * This function converts the opaque handle (mlog_descriptor) used by
+ * clients to the internal representation (pmd_layout). The
+ * conversion is a simple cast, followed by a sanity check to verify the
+ * layout object is an mlog object. If the validation fails, a NULL
+ * pointer is returned.
+ */
+struct pmd_layout *mlog2layout(struct mlog_descriptor *mlh)
+{
+ struct pmd_layout *layout = (void *)mlh;
+
+ return mlog_objid(layout->eld_objid) ? layout : NULL;
+}
+
+/**
+ * layout2mlog() - convert pmd_layout to opaque mlog_descriptor
+ *
+ * This function converts the internally used pmd_layout to
+ * the externally used opaque mlog_descriptor.
+ */
+struct mlog_descriptor *layout2mlog(struct pmd_layout *layout)
+{
+ return (struct mlog_descriptor *)layout;
+}
+
+static struct pmd_layout_mlpriv *oml_layout_find(struct mpool_descriptor *mp, u64 key)
+{
+ struct pmd_layout_mlpriv *this;
+ struct pmd_layout *layout;
+ struct rb_node *node;
+
+ node = mp->pds_oml_root.rb_node;
+ while (node) {
+ this = rb_entry(node, typeof(*this), mlp_nodeoml);
+ layout = mlpriv2layout(this);
+
+ if (key < layout->eld_objid)
+ node = node->rb_left;
+ else if (key > layout->eld_objid)
+ node = node->rb_right;
+ else
+ return this;
+ }
+
+ return NULL;
+}
+
+struct pmd_layout_mlpriv *oml_layout_insert(struct mpool_descriptor *mp,
+ struct pmd_layout_mlpriv *item)
+{
+ struct pmd_layout_mlpriv *this;
+ struct pmd_layout *layout;
+ struct rb_node **pos, *parent;
+ struct rb_root *root;
+ u64 key;
+
+ root = &mp->pds_oml_root;
+ pos = &root->rb_node;
+ parent = NULL;
+
+ key = mlpriv2layout(item)->eld_objid;
+
+ while (*pos) {
+ this = rb_entry(*pos, typeof(*this), mlp_nodeoml);
+ layout = mlpriv2layout(this);
+
+ parent = *pos;
+ if (key < layout->eld_objid)
+ pos = &(*pos)->rb_left;
+ else if (key > layout->eld_objid)
+ pos = &(*pos)->rb_right;
+ else
+ return this;
+ }
+
+ /* Add new node and rebalance tree. */
+ rb_link_node(&item->mlp_nodeoml, parent, pos);
+ rb_insert_color(&item->mlp_nodeoml, root);
+
+ return NULL;
+}
+
+struct pmd_layout_mlpriv *oml_layout_remove(struct mpool_descriptor *mp, u64 key)
+{
+ struct pmd_layout_mlpriv *found;
+
+ found = oml_layout_find(mp, key);
+ if (found)
+ rb_erase(&found->mlp_nodeoml, &mp->pds_oml_root);
+
+ return found;
+}
+
+/**
+ * mlog_free_abuf() - Free log pages in the append buffer, range:[start, end].
+ * @lstat: mlog_stat
+ * @start: start log page index, inclusive
+ * @end: end log page index, inclusive
+ */
+void mlog_free_abuf(struct mlog_stat *lstat, int start, int end)
+{
+ int i;
+
+ for (i = start; i <= end; i++) {
+ if (lstat->lst_abuf[i]) {
+ free_page((unsigned long)lstat->lst_abuf[i]);
+ lstat->lst_abuf[i] = NULL;
+ }
+ }
+}
+
+/**
+ * mlog_free_rbuf() - Free log pages in the read buffer, range:[start, end].
+ * @lstat: mlog_stat
+ * @start: start log page index, inclusive
+ * @end: end log page index, inclusive
+ */
+void mlog_free_rbuf(struct mlog_stat *lstat, int start, int end)
+{
+ int i;
+
+ for (i = start; i <= end; i++) {
+ if (lstat->lst_rbuf[i]) {
+ free_page((unsigned long)lstat->lst_rbuf[i]);
+ lstat->lst_rbuf[i] = NULL;
+ }
+ }
+}
+
+/**
+ * mlog_init_fsetparms() - Initialize frequently used mlog & flush set parameters.
+ * @mp: mpool descriptor
+ * @layout: layout descriptor
+ * @mfp: fset parameters (output)
+ */
+static void mlog_init_fsetparms(struct mpool_descriptor *mp, struct mlog_descriptor *mlh,
+ struct mlog_fsetparms *mfp)
+{
+ struct pmd_layout *layout;
+ struct pd_prop *pdp;
+ u8 secshift;
+ u16 sectsz;
+
+ layout = mlog2layout(mlh);
+ ASSERT(layout);
+
+ pdp = &mp->pds_pdv[layout->eld_ld.ol_pdh].pdi_prop;
+ secshift = PD_SECTORSZ(pdp);
+ mfp->mfp_totsec = pmd_layout_cap_get(mp, layout) >> secshift;
+
+ sectsz = 1 << secshift;
+ ASSERT((sectsz == PAGE_SIZE) || (sectsz == 512));
+
+ mfp->mfp_sectsz = sectsz;
+ mfp->mfp_lpgsz = PAGE_SIZE;
+ mfp->mfp_secpga = IS_ALIGNED(mfp->mfp_sectsz, mfp->mfp_lpgsz);
+ mfp->mfp_nlpgmb = MB >> PAGE_SHIFT;
+ mfp->mfp_nsecmb = MB >> secshift;
+ mfp->mfp_nseclpg = mfp->mfp_lpgsz >> secshift;
+}
+
+/**
+ * mlog_extract_fsetparms() - Helper to extract flush set parameters.
+ * @lstat: mlog stat
+ * @sectsz: sector size
+ * @totsec: total number of sectors in the mlog
+ * @nsecmb: number of sectors in 1 MiB
+ * @nseclpg: number of sectors in a log page
+ */
+void
+mlog_extract_fsetparms(struct mlog_stat *lstat, u16 *sectsz, u32 *totsec, u16 *nsecmb, u16 *nseclpg)
+{
+ if (sectsz)
+ *sectsz = MLOG_SECSZ(lstat);
+ if (totsec)
+ *totsec = MLOG_TOTSEC(lstat);
+ if (nsecmb)
+ *nsecmb = MLOG_NSECMB(lstat);
+ if (nseclpg)
+ *nseclpg = MLOG_NSECLPG(lstat);
+}
+
+/**
+ * mlog_stat_free() - Deallocate log stat struct for mlog layout (if any)
+ */
+void mlog_stat_free(struct pmd_layout *layout)
+{
+ struct mlog_stat *lstat = &layout->eld_lstat;
+
+ if (!lstat->lst_abuf)
+ return;
+
+ mlog_free_rbuf(lstat, 0, MLOG_NLPGMB(lstat) - 1);
+ mlog_free_abuf(lstat, 0, MLOG_NLPGMB(lstat) - 1);
+
+ kfree(lstat->lst_abuf);
+ lstat->lst_abuf = NULL;
+}
+
+/**
+ * mlog_read_iter_init() - Initialize read iterator
+ *
+ * @layout: mlog layout
+ * @lstat: mlog stat
+ * @lri" mlog read iterator
+ */
+void
+mlog_read_iter_init(struct pmd_layout *layout, struct mlog_stat *lstat, struct mlog_read_iter *lri)
+{
+ lri->lri_layout = layout;
+ lri->lri_gen = layout->eld_gen;
+ lri->lri_soff = 0;
+ lri->lri_roff = 0;
+ lri->lri_valid = 1;
+ lri->lri_rbidx = 0;
+ lri->lri_sidx = 0;
+
+ lstat->lst_rsoff = -1;
+ lstat->lst_rseoff = -1;
+}
+
+/**
+ * mlog_stat_init_common() - Initialize mlog_stat fields.
+ * @layout:
+ * @lstat: mlog_stat
+ */
+void mlog_stat_init_common(struct pmd_layout *layout, struct mlog_stat *lstat)
+{
+ struct mlog_read_iter *lri;
+
+ lstat->lst_pfsetid = 0;
+ lstat->lst_cfsetid = 1;
+ lstat->lst_abidx = 0;
+ lstat->lst_asoff = -1;
+ lstat->lst_cfssoff = OMF_LOGBLOCK_HDR_PACKLEN;
+ lstat->lst_aoff = OMF_LOGBLOCK_HDR_PACKLEN;
+ lstat->lst_abdirty = false;
+ lstat->lst_wsoff = 0;
+ lstat->lst_cstart = 0;
+ lstat->lst_cend = 0;
+
+ lri = &lstat->lst_citr;
+ mlog_read_iter_init(layout, lstat, lri);
+}
+
+/**
+ * mlog_rw_raw() - Called by mpctl kernel for mlog IO.
+ * @mp: mpool descriptor
+ * @mlh: mlog descriptor
+ * @iov: iovec
+ * @iovcnt: iov cnt
+ * @boff: IO offset
+ * @rw: MPOOL_OP_READ or MPOOL_OP_WRITE
+ *
+ * The scatter-gather buffer must contain
+ * framed mlog data (this is done in user space for user space mlogs).
+ */
+int mlog_rw_raw(struct mpool_descriptor *mp, struct mlog_descriptor *mlh,
+ const struct kvec *iov, int iovcnt, u64 boff, u8 rw)
+{
+ struct pmd_layout *layout;
+ int flags;
+ int rc;
+
+ layout = mlog2layout(mlh);
+ if (!layout)
+ return -EINVAL;
+
+ flags = (rw == MPOOL_OP_WRITE) ? REQ_FUA : 0;
+
+ pmd_obj_wrlock(layout);
+ rc = pmd_layout_rw(mp, layout, iov, iovcnt, boff, flags, rw);
+ pmd_obj_wrunlock(layout);
+
+ return rc;
+}
+
+/**
+ * mlog_rw() -
+ * @mp: mpool descriptor
+ * @mlh: mlog descriptor
+ * @iov: iovec
+ * @iovcnt: iov cnt
+ * @boff: IO offset
+ * @rw: MPOOL_OP_READ or MPOOL_OP_WRITE
+ * @skip_ser: client guarantees serialization
+ */
+static int mlog_rw(struct mpool_descriptor *mp, struct mlog_descriptor *mlh,
+ struct kvec *iov, int iovcnt, u64 boff, u8 rw, bool skip_ser)
+{
+ struct pmd_layout *layout;
+
+ layout = mlog2layout(mlh);
+ if (!layout)
+ return -EINVAL;
+
+ if (!skip_ser) {
+ int flags = (rw == MPOOL_OP_WRITE) ? REQ_FUA : 0;
+
+ return pmd_layout_rw(mp, layout, iov, iovcnt, boff, flags, rw);
+ }
+
+ return mlog_rw_raw(mp, mlh, iov, iovcnt, boff, rw);
+}
+
+/**
+ * mlog_stat_init() - Allocate and init log stat struct for mlog layout.
+ *
+ * Returns: 0 if successful, -errno otherwise
+ */
+int mlog_stat_init(struct mpool_descriptor *mp, struct mlog_descriptor *mlh, bool csem)
+{
+ struct pmd_layout *layout = mlog2layout(mlh);
+ struct mlog_fsetparms mfp;
+ struct mlog_stat *lstat;
+ size_t bufsz;
+ int rc;
+
+ if (!layout)
+ return -EINVAL;
+
+ lstat = &layout->eld_lstat;
+
+ mlog_stat_init_common(layout, lstat);
+ mlog_init_fsetparms(mp, mlh, &mfp);
+
+ bufsz = mfp.mfp_nlpgmb * sizeof(char *) * 2;
+
+ lstat->lst_abuf = kzalloc(bufsz, GFP_KERNEL);
+ if (!lstat->lst_abuf) {
+ rc = -ENOMEM;
+ mp_pr_err("mpool %s, allocating mlog 0x%lx status failed %zu",
+ rc, mp->pds_name, (ulong)layout->eld_objid, bufsz);
+ return rc;
+ }
+
+ lstat->lst_rbuf = lstat->lst_abuf + mfp.mfp_nlpgmb;
+ lstat->lst_mfp = mfp;
+ lstat->lst_csem = csem;
+
+ return 0;
+}
+
+/**
+ * mlog_setup_buf() - Build an iovec list to read into an mlog read buffer, or write from
+ * an mlog append buffer.
+ * @lstat: mlog_stat
+ * @riov: iovec (output)
+ * @iovcnt: number of iovecs
+ * @l_iolen: IO length for the last log page in the buffer
+ * @op: MPOOL_OP_READ or MPOOL_OP_WRITE
+ *
+ * In the read case, the read buffer pages will be allocated if not already populated.
+ */
+static int
+mlog_setup_buf(struct mlog_stat *lstat, struct kvec **riov, u16 iovcnt, u32 l_iolen, u8 op)
+{
+ struct kvec *iov = *riov;
+ u32 len = MLOG_LPGSZ(lstat);
+ bool alloc_iov = false;
+ u16 i;
+ char *buf;
+
+ ASSERT(len == PAGE_SIZE);
+ ASSERT(l_iolen <= PAGE_SIZE);
+
+ if (!iov) {
+ ASSERT((iovcnt * sizeof(*iov)) <= PAGE_SIZE);
+
+ iov = kcalloc(iovcnt, sizeof(*iov), GFP_KERNEL);
+ if (!iov)
+ return -ENOMEM;
+
+ alloc_iov = true;
+ *riov = iov;
+ }
+
+ for (i = 0; i < iovcnt; i++, iov++) {
+ buf = ((op == MPOOL_OP_READ) ? lstat->lst_rbuf[i] : lstat->lst_abuf[i]);
+
+ /* iov_len for the last log page in read/write buffer. */
+ if (i == iovcnt - 1 && l_iolen != 0)
+ len = l_iolen;
+
+ ASSERT(IS_ALIGNED(len, MLOG_SECSZ(lstat)));
+
+ if (op == MPOOL_OP_WRITE && buf) {
+ iov->iov_base = buf;
+ iov->iov_len = len;
+ continue;
+ }
+
+ /*
+ * Pages for the append buffer are allocated in
+ * mlog_append_*(), so we shouldn't be here for MPOOL_OP_WRITE.
+ */
+ ASSERT(op == MPOOL_OP_READ);
+
+ /*
+ * If the read buffer contains stale log pages from a prior
+ * iterator, reuse them. No need to zero these pages for
+ * the same reason provided in the following comment.
+ */
+ if (buf) {
+ iov->iov_base = buf;
+ iov->iov_len = len;
+ continue;
+ }
+
+ /*
+ * No need to zero the read buffer as we never read more than
+ * what's needed and do not consume beyond what's read.
+ */
+ buf = (char *)__get_free_page(GFP_KERNEL);
+ if (!buf) {
+ mlog_free_rbuf(lstat, 0, i - 1);
+ if (alloc_iov) {
+ kfree(iov);
+ *riov = NULL;
+ }
+
+ return -ENOMEM;
+ }
+
+ /*
+ * Must be a page-aligned buffer so that it can be used
+ * in bio_add_page().
+ */
+ ASSERT(PAGE_ALIGNED(buf));
+
+ lstat->lst_rbuf[i] = iov->iov_base = buf;
+ iov->iov_len = len;
+ }
+
+ return 0;
+}
+
+/**
+ * mlog_populate_abuf() - Makes append offset page-aligned and performs the
+ * read operation in the read-modify-write cycle.
+ * @mp: mpool descriptor
+ * @layout: layout descriptor
+ * @soff: sector/LB offset
+ * @buf: buffer to populate. Size of this buffer must be MLOG_LPGSZ(lstat).
+ * @skip_ser: client guarantees serialization
+ *
+ * This is to ensure that IO-requests to the device are always 4K-aligned.
+ * The read-modify-write cycle happens *only* if the first append post mlog
+ * open lands on a non-page aligned sector offset. For any further appends,
+ * read-modify-write cycle doesn't happen, as the 4k-aligned version of the
+ * flush set algorithm ensures 4k-alignment of sector offsets at the start
+ * of each log page.
+ */
+static int mlog_populate_abuf(struct mpool_descriptor *mp, struct pmd_layout *layout,
+ off_t *soff, char *buf, bool skip_ser)
+{
+ struct mlog_stat *lstat = &layout->eld_lstat;
+ struct kvec iov;
+ u16 sectsz, iovcnt, leading;
+ off_t off;
+ u32 leadb;
+ int rc;
+
+ sectsz = MLOG_SECSZ(lstat);
+
+ /* Find the leading number of sectors to make it page-aligned. */
+ leading = ((*soff * sectsz) & ~PAGE_MASK) >> ilog2(sectsz);
+ if (leading == 0)
+ return 0; /* Nothing to do */
+
+ *soff = *soff - leading;
+ leadb = leading * sectsz;
+
+ iovcnt = 1;
+ iov.iov_base = buf;
+ iov.iov_len = MLOG_LPGSZ(lstat);
+
+ off = *soff * sectsz;
+ ASSERT(IS_ALIGNED(off, MLOG_LPGSZ(lstat)));
+
+ rc = mlog_rw(mp, layout2mlog(layout), &iov, iovcnt, off, MPOOL_OP_READ, skip_ser);
+ if (rc) {
+ mp_pr_err("mpool %s, mlog 0x%lx, read IO failed, iovcnt: %u, off: 0x%lx",
+ rc, mp->pds_name, (ulong)layout->eld_objid, iovcnt, off);
+ return rc;
+ }
+
+ memset(&buf[leadb], 0, MLOG_LPGSZ(lstat) - leadb);
+
+ return 0;
+}
+
+/**
+ * mlog_populate_rbuf() - Fill the read buffer after aligning the read offset to page boundary.
+ * @mp: mpool descriptor
+ * @layout: layout descriptor
+ * @nsec: number of sectors to populate
+ * @soff: start sector/LB offset
+ * @skip_ser: client guarantees serialization
+ *
+ * Having the read offsets page-aligned avoids unnecessary
+ * complexity at the pd layer.
+ *
+ * In the worst case, for 512 byte sectors, we would end up reading 7
+ * additional sectors, which is acceptable. There won't be any overhead for
+ * 4 KiB sectors as they are naturally page-aligned.
+ *
+ * Caller must hold the write lock on the layout.
+ */
+int mlog_populate_rbuf(struct mpool_descriptor *mp, struct pmd_layout *layout,
+ u16 *nsec, off_t *soff, bool skip_ser)
+{
+ struct mlog_stat *lstat = &layout->eld_lstat;
+ struct kvec *iov = NULL;
+ u16 maxsec, sectsz, iovcnt, nseclpg, leading;
+ off_t off;
+ u32 l_iolen;
+ int rc;
+
+ mlog_extract_fsetparms(lstat, §sz, NULL, &maxsec, &nseclpg);
+
+ /* Find the leading number of sectors to make it page-aligned. */
+ leading = ((*soff * sectsz) & ~PAGE_MASK) >> ilog2(sectsz);
+ *soff = *soff - leading;
+ *nsec += leading;
+
+ *nsec = min_t(u32, maxsec, *nsec);
+ iovcnt = (*nsec + nseclpg - 1) / nseclpg;
+ l_iolen = MLOG_LPGSZ(lstat);
+
+ rc = mlog_setup_buf(lstat, &iov, iovcnt, l_iolen, MPOOL_OP_READ);
+ if (rc) {
+ mp_pr_err("mpool %s, mlog 0x%lx setup failed, iovcnt: %u, last iolen: %u",
+ rc, mp->pds_name, (ulong)layout->eld_objid, iovcnt, l_iolen);
+ return rc;
+ }
+
+ off = *soff * sectsz;
+ ASSERT(IS_ALIGNED(off, MLOG_LPGSZ(lstat)));
+
+ rc = mlog_rw(mp, layout2mlog(layout), iov, iovcnt, off, MPOOL_OP_READ, skip_ser);
+ if (rc) {
+ mp_pr_err("mpool %s, mlog 0x%lx populate rbuf, IO failed iovcnt: %u, off: 0x%lx",
+ rc, mp->pds_name, (ulong)layout->eld_objid, iovcnt, off);
+
+ mlog_free_rbuf(lstat, 0, MLOG_NLPGMB(lstat) - 1);
+ kfree(iov);
+ return rc;
+ }
+
+ /*
+ * If there're any unused buffers beyond iovcnt, free it. This is
+ * likely to happen when there're multiple threads reading from
+ * the same mlog simultaneously, using their own iterator.
+ */
+ mlog_free_rbuf(lstat, iovcnt, MLOG_NLPGMB(lstat) - 1);
+
+ kfree(iov);
+
+ return 0;
+}
+
+/**
+ * mlog_alloc_abufpg() - Allocate a log page at append buffer index 'abidx'.
+ * @mp: mpool descriptor
+ * @layout: layout descriptor
+ * @abidx: allocate log page at index 'abidx'.
+ * @skip_ser: client guarantees serialization
+ *
+ * If the sector size is 512B AND 4K-alignment is forced AND the append offset
+ * at buffer index '0' is not 4K-aligned, then call mlog_populate_abuf().
+ */
+static int mlog_alloc_abufpg(struct mpool_descriptor *mp, struct pmd_layout *layout,
+ u16 abidx, bool skip_ser)
+{
+ struct mlog_stat *lstat = &layout->eld_lstat;
+ char *abuf;
+
+ ASSERT(MLOG_LPGSZ(lstat) == PAGE_SIZE);
+
+ abuf = (char *)get_zeroed_page(GFP_KERNEL);
+ if (!abuf)
+ return -ENOMEM;
+
+ lstat->lst_abuf[abidx] = abuf;
+
+ if (abidx == 0) {
+ off_t asoff, wsoff;
+ u16 aoff, sectsz;
+ int rc;
+
+ /* This path is taken *only* for the first append following an mlog_open(). */
+ sectsz = MLOG_SECSZ(lstat);
+ wsoff = lstat->lst_wsoff;
+ aoff = lstat->lst_aoff;
+
+ if (IS_SECPGA(lstat) || (IS_ALIGNED(wsoff * sectsz, MLOG_LPGSZ(lstat)))) {
+ /* This is the common path */
+ lstat->lst_asoff = wsoff;
+ return 0;
+ }
+
+ /*
+ * This path is taken *only* if,
+ * - the log block size is 512B AND
+ * - lst_wsoff is non page-aligned, which is possible for the
+ * first append post mlog_open.
+ */
+ asoff = wsoff;
+ rc = mlog_populate_abuf(mp, layout, &asoff, abuf, skip_ser);
+ if (rc) {
+ mp_pr_err("mpool %s, mlog 0x%lx, making write offset %ld 4K-aligned failed",
+ rc, mp->pds_name, (ulong)layout->eld_objid, wsoff);
+ mlog_free_abuf(lstat, abidx, abidx);
+ return rc;
+ }
+
+ ASSERT(asoff <= wsoff);
+ ASSERT(IS_ALIGNED(asoff * sectsz, MLOG_LPGSZ(lstat)));
+
+ lstat->lst_cfssoff = ((wsoff - asoff) * sectsz) + aoff;
+ lstat->lst_asoff = asoff;
+ }
+
+ return 0;
+}
+
+/**
+ * mlog_flush_abuf() - Set up iovec and flush the append buffer to media.
+ * @mp: mpool descriptor
+ * @layout: layout descriptor
+ * @skip_ser: client guarantees serialization
+ */
+static int mlog_flush_abuf(struct mpool_descriptor *mp, struct pmd_layout *layout, bool skip_ser)
+{
+ struct mlog_stat *lstat = &layout->eld_lstat;
+ struct kvec *iov = NULL;
+ u16 abidx, sectsz, nseclpg;
+ off_t off;
+ u32 l_iolen;
+ int rc;
+
+ mlog_extract_fsetparms(lstat, §sz, NULL, NULL, &nseclpg);
+
+ abidx = lstat->lst_abidx;
+ l_iolen = MLOG_LPGSZ(lstat);
+
+ rc = mlog_setup_buf(lstat, &iov, abidx + 1, l_iolen, MPOOL_OP_WRITE);
+ if (rc) {
+ mp_pr_err("mpool %s, mlog 0x%lx flush, buf setup failed, iovcnt: %u, iolen: %u",
+ rc, mp->pds_name, (ulong)layout->eld_objid, abidx + 1, l_iolen);
+ return rc;
+ }
+
+ off = lstat->lst_asoff * sectsz;
+
+ ASSERT((IS_ALIGNED(off, MLOG_LPGSZ(lstat))) ||
+ (IS_SECPGA(lstat) && IS_ALIGNED(off, MLOG_SECSZ(lstat))));
+
+ rc = mlog_rw(mp, layout2mlog(layout), iov, abidx + 1, off, MPOOL_OP_WRITE, skip_ser);
+ if (rc)
+ mp_pr_err("mpool %s, mlog 0x%lx flush append buf, IO failed iovcnt %u, off 0x%lx",
+ rc, mp->pds_name, (ulong)layout->eld_objid, abidx + 1, off);
+
+ kfree(iov);
+
+ return rc;
+}
+
+/**
+ * mlog_flush_posthdlr_4ka() - Handles both successful and failed flush for
+ * 512B sectors with 4K-Alignment.
+ * @layout: layout descriptor
+ * @fsucc: flush status
+ */
+static void mlog_flush_posthdlr_4ka(struct pmd_layout *layout, bool fsucc)
+{
+ struct mlog_stat *lstat = &layout->eld_lstat;
+ u16 abidx, sectsz, asidx;
+ off_t asoff, wsoff;
+ char *abuf;
+ u32 nsecwr;
+
+ sectsz = MLOG_SECSZ(lstat);
+ abidx = lstat->lst_abidx;
+ asoff = lstat->lst_asoff;
+ wsoff = lstat->lst_wsoff;
+
+ asidx = wsoff - ((MLOG_NSECLPG(lstat) * abidx) + asoff);
+
+ /* Set the current filling log page index to 0. */
+ lstat->lst_abidx = 0;
+ abuf = lstat->lst_abuf[0];
+
+ if (!fsucc) {
+ u32 cfssoff;
+
+ /*
+ * Last CFS flush or header packing failed.
+ * Retain the pfsetid of the first log block.
+ */
+ cfssoff = lstat->lst_cfssoff;
+ memset(&abuf[cfssoff], 0, MLOG_LPGSZ(lstat) - cfssoff);
+ asidx = (cfssoff >> ilog2(sectsz));
+ lstat->lst_aoff = cfssoff - (asidx * sectsz);
+ lstat->lst_wsoff = asoff + asidx;
+
+ goto exit2;
+ }
+
+ /* Last CFS flush succeded. */
+ if (abidx != 0) {
+ /* Reorganize buffers if the active log page not at index 0. */
+ abuf = lstat->lst_abuf[abidx];
+ lstat->lst_abuf[abidx] = NULL;
+ }
+
+ nsecwr = wsoff - (asoff + (lstat->lst_cfssoff >> ilog2(sectsz)));
+ asoff = wsoff - asidx;
+
+ /* The last logblock of the just-written CFS is not full. */
+ if (sectsz - lstat->lst_aoff >= OMF_LOGREC_DESC_PACKLEN) {
+ if (nsecwr != 0)
+ /* Set pfsetid to the cfsetid of just-written CFS. */
+ lstat->lst_pfsetid = lstat->lst_cfsetid;
+
+ goto exit1;
+ }
+
+ /* The last logblock of the just-written CFS is full. */
+ lstat->lst_aoff = OMF_LOGBLOCK_HDR_PACKLEN;
+ ++wsoff;
+ if ((wsoff - asoff) == MLOG_NSECLPG(lstat)) {
+ memset(&abuf[0], 0, MLOG_LPGSZ(lstat));
+ asoff = wsoff;
+ }
+ /* Set pfsetid to the cfsetid of just-written CFS. */
+ lstat->lst_pfsetid = lstat->lst_cfsetid;
+
+exit1:
+ asidx = wsoff - asoff;
+ lstat->lst_cfssoff = (asidx * sectsz) + lstat->lst_aoff;
+ lstat->lst_asoff = asoff;
+ lstat->lst_wsoff = wsoff;
+
+exit2:
+ /* Increment cfsetid in all cases. */
+ ++lstat->lst_cfsetid;
+
+ lstat->lst_abuf[0] = abuf;
+}
+
+/**
+ * mlog_flush_posthdlr() - Handles both successful and failed flush for
+ * 512B and 4K-sectors with native alignment, i.e., 512B and 4K resply.
+ *
+ * @layout: layout descriptor
+ * @fsucc: flush status
+ */
+static void mlog_flush_posthdlr(struct pmd_layout *layout, bool fsucc)
+{
+ struct mlog_stat *lstat = &layout->eld_lstat;
+ u16 abidx, sectsz, asidx;
+ off_t asoff, lpgoff;
+ char *abuf;
+
+ sectsz = MLOG_SECSZ(lstat);
+ abidx = lstat->lst_abidx;
+ asoff = lstat->lst_asoff;
+
+ asidx = lstat->lst_wsoff - ((MLOG_NSECLPG(lstat) * abidx) + asoff);
+ lpgoff = asidx * sectsz;
+
+ /* Set the current filling log page index to 0. */
+ lstat->lst_abidx = 0;
+ abuf = lstat->lst_abuf[0];
+
+ if (!fsucc) {
+ u32 cfssoff;
+
+ /*
+ * Last CFS flush or header packing failed.
+ * Retain the pfsetid of the first log block.
+ */
+ cfssoff = lstat->lst_cfssoff;
+ memset(&abuf[cfssoff], 0, MLOG_LPGSZ(lstat) - cfssoff);
+ lstat->lst_aoff = cfssoff;
+ lstat->lst_wsoff = asoff;
+
+ goto exit2;
+ }
+
+ /* Last CFS flush succeded. */
+ if (abidx != 0) {
+ /* Reorganize buffers if the active log page not at index 0. */
+ abuf = lstat->lst_abuf[abidx];
+ lstat->lst_abuf[abidx] = NULL;
+ }
+
+ /* The last logblock of the just-written CFS is not full. */
+ if (sectsz - lstat->lst_aoff >= OMF_LOGREC_DESC_PACKLEN) {
+ /*
+ * If the last logblock in the just-written CFS is
+ * first in the append buffer at abidx.
+ */
+ if (lpgoff == 0) {
+ if (abidx != 0)
+ lstat->lst_pfsetid = lstat->lst_cfsetid;
+
+ goto exit1;
+ }
+
+ memcpy(&abuf[0], &abuf[lpgoff], sectsz);
+ memset(&abuf[sectsz], 0, lpgoff - sectsz + lstat->lst_aoff);
+ } else { /* The last logblock of the just-written CFS is full. */
+ memset(&abuf[0], 0, lpgoff + sectsz);
+ lstat->lst_aoff = OMF_LOGBLOCK_HDR_PACKLEN;
+ ++lstat->lst_wsoff;
+ }
+ /* Set pfsetid to the cfsetid of just-written CFS. */
+ lstat->lst_pfsetid = lstat->lst_cfsetid;
+
+exit1:
+ lstat->lst_cfssoff = lstat->lst_aoff;
+ lstat->lst_asoff = lstat->lst_wsoff;
+
+exit2:
+ /* Increment cfsetid in all cases. */
+ ++lstat->lst_cfsetid;
+
+ lstat->lst_abuf[0] = abuf;
+}
+
+/**
+ * mlog_logblocks_hdrpack() - Pack log block header in all log blocks in the append buffer.
+ * @layout: object layout
+ *
+ * Called prior to CFS flush
+ */
+static int mlog_logblocks_hdrpack(struct pmd_layout *layout)
+{
+ struct omf_logblock_header lbh;
+ struct mlog_stat *lstat = &layout->eld_lstat;
+ off_t lpgoff;
+ u32 pfsetid, cfsetid;
+ u16 sectsz, nseclpg;
+ u16 idx, abidx;
+ u16 sec, start;
+
+ sectsz = MLOG_SECSZ(lstat);
+ nseclpg = MLOG_NSECLPG(lstat);
+ abidx = lstat->lst_abidx;
+ pfsetid = lstat->lst_pfsetid;
+ cfsetid = lstat->lst_cfsetid;
+
+ lbh.olh_vers = OMF_LOGBLOCK_VERS;
+
+ for (idx = 0; idx <= abidx; idx++) {
+ start = 0;
+
+ if (!IS_SECPGA(lstat) && idx == 0)
+ start = (lstat->lst_cfssoff >> ilog2(sectsz));
+
+ if (idx == abidx)
+ nseclpg = lstat->lst_wsoff - (nseclpg * abidx + lstat->lst_asoff) + 1;
+
+ for (sec = start; sec < nseclpg; sec++) {
+ int rc;
+
+ lbh.olh_pfsetid = pfsetid;
+ lbh.olh_cfsetid = cfsetid;
+ mpool_uuid_copy(&lbh.olh_magic, &layout->eld_uuid);
+ lbh.olh_gen = layout->eld_gen;
+ lpgoff = sec * sectsz;
+
+ /* Pack the log block header. */
+ rc = omf_logblock_header_pack_htole(&lbh, &lstat->lst_abuf[idx][lpgoff]);
+ if (rc) {
+ mp_pr_err("mlog packing lbh failed, log pg idx %u, vers %u failed",
+ rc, idx, lbh.olh_vers);
+
+ return rc;
+ }
+
+ /* If there's more than one sector to flush, pfsetid is set to cfsetid. */
+ pfsetid = cfsetid;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * mlog_logblocks_flush() - Flush CFS and handle both successful and failed flush.
+ * @mp: mpool descriptor
+ * @layout: layout descriptor
+ * @skip_ser: client guarantees serialization
+ */
+int mlog_logblocks_flush(struct mpool_descriptor *mp, struct pmd_layout *layout, bool skip_ser)
+{
+ struct mlog_stat *lstat = &layout->eld_lstat;
+ int start, end, rc;
+ bool fsucc = true;
+ u16 abidx;
+
+ abidx = lstat->lst_abidx;
+
+ /* Pack log block header in all the log blocks. */
+ rc = mlog_logblocks_hdrpack(layout);
+ if (rc) {
+ mp_pr_err("mpool %s, mlog 0x%lx packing header failed",
+ rc, mp->pds_name, (ulong)layout->eld_objid);
+
+ } else {
+ rc = mlog_flush_abuf(mp, layout, skip_ser);
+ if (rc)
+ mp_pr_err("mpool %s, mlog 0x%lx log block flush failed",
+ rc, mp->pds_name, (ulong)layout->eld_objid);
+ }
+
+ if (rc) {
+ /* If flush failed, free all log pages except the first one. */
+ start = 1;
+ end = abidx;
+ fsucc = false;
+ } else {
+ /* If flush succeeded, free all log pages except the last one.*/
+ start = 0;
+ end = abidx - 1;
+
+ /*
+ * Inform pre-compaction of the size of the active mlog and
+ * how much is used.
+ */
+ pmd_precompact_alsz(mp, layout->eld_objid, lstat->lst_wsoff * MLOG_SECSZ(lstat),
+ lstat->lst_mfp.mfp_totsec * MLOG_SECSZ(lstat));
+ }
+ mlog_free_abuf(lstat, start, end);
+
+ if (!IS_SECPGA(lstat))
+ mlog_flush_posthdlr_4ka(layout, fsucc);
+ else
+ mlog_flush_posthdlr(layout, fsucc);
+
+ return rc;
+}
+
+/**
+ * mlog_append_dmax() -
+ *
+ * Max data record that can be appended to log in bytes; -1 if no room
+ * for a 0 byte data record due to record descriptor length.
+ */
+s64 mlog_append_dmax(struct pmd_layout *layout)
+{
+ struct mlog_stat *lstat = &layout->eld_lstat;
+ u64 lbmax, lbrest;
+ u32 sectsz, datalb;
+
+ sectsz = MLOG_SECSZ(lstat);
+ datalb = MLOG_TOTSEC(lstat);
+
+ if (lstat->lst_wsoff >= datalb) {
+ /* Mlog already full */
+ return -1;
+ }
+
+ lbmax = (sectsz - OMF_LOGBLOCK_HDR_PACKLEN - OMF_LOGREC_DESC_PACKLEN);
+ lbrest = (datalb - lstat->lst_wsoff - 1) * lbmax;
+
+ if ((sectsz - lstat->lst_aoff) < OMF_LOGREC_DESC_PACKLEN) {
+ /* Current log block cannot hold even a record descriptor */
+ if (lbrest)
+ return lbrest;
+
+ return -1;
+ }
+
+ /*
+ * Can start in current log block and spill over to others (if any)
+ */
+ return sectsz - lstat->lst_aoff - OMF_LOGREC_DESC_PACKLEN + lbrest;
+}
+
+/**
+ * mlog_update_append_idx() - Check if active log block is full and update the append offsets
+ *
+ * Returns: 0 on success; -errno otherwise
+ */
+int mlog_update_append_idx(struct mpool_descriptor *mp, struct pmd_layout *layout, bool skip_ser)
+{
+ struct mlog_stat *lstat = &layout->eld_lstat;
+ u16 sectsz, nseclpg, abidx, asidx;
+ int rc;
+
+ sectsz = MLOG_SECSZ(lstat);
+ nseclpg = MLOG_NSECLPG(lstat);
+
+ if (sectsz - lstat->lst_aoff < OMF_LOGREC_DESC_PACKLEN) {
+ /* If the log block is full, move to the next log block in the buffer. */
+ abidx = lstat->lst_abidx;
+ asidx = lstat->lst_wsoff - ((nseclpg * abidx) + lstat->lst_asoff);
+ if (asidx == nseclpg - 1)
+ ++lstat->lst_abidx;
+ ++lstat->lst_wsoff;
+ lstat->lst_aoff = OMF_LOGBLOCK_HDR_PACKLEN;
+ }
+
+ abidx = lstat->lst_abidx;
+ if (!lstat->lst_abuf[abidx]) {
+ /* Allocate a log page at 'abidx' */
+ rc = mlog_alloc_abufpg(mp, layout, abidx, skip_ser);
+ if (rc)
+ return rc;
+ }
+
+ return 0;
+}
+
+/**
+ * mlog_logblocks_load_media() - Read log blocks from media, upto a maximum of 1 MiB.
+ * @mp: mpool descriptor
+ * @lri: read iterator
+ * @inbuf: buffer to into (output)
+ */
+static int mlog_logblocks_load_media(struct mpool_descriptor *mp, struct mlog_read_iter *lri,
+ char **inbuf)
+{
+ struct pmd_layout *layout = lri->lri_layout;
+ struct mlog_stat *lstat = &layout->eld_lstat;
+ u16 maxsec, nsecs, sectsz;
+ bool skip_ser = false;
+ off_t rsoff;
+ int remsec, rc;
+
+ mlog_extract_fsetparms(lstat, §sz, NULL, &maxsec, NULL);
+
+ /*
+ * The read and append buffer must never overlap. So, the read buffer
+ * can only hold sector offsets in the range [0, lstat->lst_asoff - 1].
+ */
+ if (lstat->lst_asoff < 0)
+ remsec = lstat->lst_wsoff;
+ else
+ remsec = lstat->lst_asoff;
+
+ if (remsec == 0) {
+ rc = -ENOTRECOVERABLE;
+ mp_pr_err("mpool %s, objid 0x%lx, mlog read cannot be served from read buffer",
+ rc, mp->pds_name, (ulong)lri->lri_layout->eld_objid);
+ return rc;
+ }
+
+ lri->lri_rbidx = 0;
+ lri->lri_sidx = 0;
+
+ rsoff = lri->lri_soff;
+ remsec -= rsoff;
+ ASSERT(remsec > 0);
+
+ nsecs = min_t(u32, maxsec, remsec);
+
+ if (layout->eld_flags & MLOG_OF_SKIP_SER)
+ skip_ser = true;
+
+ rc = mlog_populate_rbuf(mp, lri->lri_layout, &nsecs, &rsoff, skip_ser);
+ if (rc) {
+ mp_pr_err("mpool %s, objid 0x%lx, mlog read failed, nsecs: %u, rsoff: 0x%lx",
+ rc, mp->pds_name, (ulong)lri->lri_layout->eld_objid, nsecs, rsoff);
+
+ lstat->lst_rsoff = lstat->lst_rseoff = -1;
+
+ return rc;
+ }
+
+ /*
+ * 'nsecs' and 'rsoff' can be changed by mlog_populate_rbuf, if the
+ * read offset is not page-aligned. Adjust lri_sidx and lst_rsoff
+ * accordingly.
+ */
+ lri->lri_sidx = lri->lri_soff - rsoff;
+ lstat->lst_rsoff = rsoff;
+ lstat->lst_rseoff = rsoff + nsecs - 1;
+
+ *inbuf = lstat->lst_rbuf[lri->lri_rbidx];
+ *inbuf += lri->lri_sidx * sectsz;
+
+ return 0;
+}
+
+/**
+ * mlog_logblock_load_internal() - Read log blocks from either the read buffer or media.
+ * @mp: mpool descriptor
+ * @lri: read iterator
+ * @inbuf: buffer to load into (output)
+ */
+static int mlog_logblock_load_internal(struct mpool_descriptor *mp, struct mlog_read_iter *lri,
+ char **inbuf)
+{
+ struct mlog_stat *lstat;
+ off_t rsoff, rseoff, soff;
+ u16 nsecs, rbidx, rsidx;
+ u16 nlpgs, nseclpg;
+ int rc;
+
+ lstat = &lri->lri_layout->eld_lstat;
+
+ nseclpg = MLOG_NSECLPG(lstat);
+ rbidx = lri->lri_rbidx;
+ rsidx = lri->lri_sidx;
+ soff = lri->lri_soff;
+ rsoff = lstat->lst_rsoff;
+ rseoff = lstat->lst_rseoff;
+
+ if (rsoff < 0)
+ goto media_read;
+
+ /*
+ * If the read offset doesn't fall within the read buffer range,
+ * then media read.
+ */
+ if ((soff < rsoff) || (soff > rseoff))
+ goto media_read;
+
+ do {
+ /* If this is not the start of log block. */
+ if (lri->lri_roff != 0)
+ break;
+
+ /* Check if there's unconsumed data in rbuf. */
+ nsecs = rseoff - rsoff + 1;
+ nlpgs = (nsecs + nseclpg - 1) / nseclpg;
+
+ /* No. of sectors in the last log page. */
+ if (rbidx == nlpgs - 1) {
+ nseclpg = nsecs % nseclpg;
+ nseclpg = nseclpg > 0 ? nseclpg : MLOG_NSECLPG(lstat);
+ }
+ /* Remaining sectors in the active log page? */
+ if (rsidx < nseclpg - 1) {
+ ++rsidx;
+ break;
+ }
+ /* Remaining log pages in the read buffer? */
+ if (rbidx >= nlpgs - 1)
+ goto media_read;
+
+ /* Free the active log page and move to next one. */
+ mlog_free_rbuf(lstat, rbidx, rbidx);
+ ++rbidx;
+ rsidx = 0;
+
+ break;
+ } while (0);
+
+ /* Serve data from the read buffer. */
+ *inbuf = lstat->lst_rbuf[rbidx];
+ *inbuf += rsidx * MLOG_SECSZ(lstat);
+
+ lri->lri_rbidx = rbidx;
+ lri->lri_sidx = rsidx;
+
+ return 0;
+
+media_read:
+ rc = mlog_logblocks_load_media(mp, lri, inbuf);
+ if (rc) {
+ mp_pr_err("mpool %s, objid 0x%lx, mlog new read failed",
+ rc, mp->pds_name, (ulong)lri->lri_layout->eld_objid);
+
+ return rc;
+ }
+
+ return 0;
+}
+
+/**
+ * mlog_loopback_load() - Load log block referenced by lri into lstat.
+ *
+ * Load log block referenced by lri into lstat, update lri if first read
+ * from this log block, and return a pointer to the log block and a flag
+ * indicating if lri references first record in log block.
+ *
+ * Note: lri can reference the log block currently accumulating in lstat
+ *
+ * Returns: 0 on success; -errno otherwise
+ * One of the possible errno values:
+ * -ENOMSG - if at end of log -- NB: requires an API change to signal without
+ */
+int mlog_logblock_load(struct mpool_descriptor *mp, struct mlog_read_iter *lri,
+ char **buf, bool *first)
+{
+ struct mlog_stat *lstat = NULL;
+ int lbhlen = 0;
+ int rc = 0;
+
+ *buf = NULL;
+ *first = false;
+ lstat = &lri->lri_layout->eld_lstat;
+
+ if (!lri->lri_valid || lri->lri_soff > lstat->lst_wsoff) {
+ /* lri is invalid; prior checks should prevent this */
+ rc = -EINVAL;
+ mp_pr_err("mpool %s, invalid offset %u %ld %ld",
+ rc, mp->pds_name, lri->lri_valid, lri->lri_soff, lstat->lst_wsoff);
+ } else if ((lri->lri_soff == lstat->lst_wsoff) || (lstat->lst_asoff > -1 &&
+ lri->lri_soff >= lstat->lst_asoff &&
+ lri->lri_soff <= lstat->lst_wsoff)) {
+ u16 abidx, sectsz, asidx, nseclpg;
+
+ /*
+ * lri refers to the currently accumulating log block
+ * in lstat
+ */
+ if (!lri->lri_roff)
+ /* First read with handle from this log block. */
+ lri->lri_roff = OMF_LOGBLOCK_HDR_PACKLEN;
+
+ if (lri->lri_soff == lstat->lst_wsoff && lri->lri_roff > lstat->lst_aoff) {
+ /* lri is invalid; prior checks should prevent this */
+ rc = -EINVAL;
+ mp_pr_err("mpool %s, invalid next offset %u %u",
+ rc, mp->pds_name, lri->lri_roff, lstat->lst_aoff);
+ goto out;
+ } else if (lri->lri_soff == lstat->lst_wsoff && lri->lri_roff == lstat->lst_aoff) {
+ /* Hit end of log */
+ rc = -ENOMSG;
+ goto out;
+ } else if (lri->lri_roff == OMF_LOGBLOCK_HDR_PACKLEN)
+ *first = true;
+
+ sectsz = MLOG_SECSZ(lstat);
+ nseclpg = MLOG_NSECLPG(lstat);
+
+ abidx = (lri->lri_soff - lstat->lst_asoff) / nseclpg;
+ asidx = lri->lri_soff - ((nseclpg * abidx) + lstat->lst_asoff);
+
+ *buf = &lstat->lst_abuf[abidx][asidx * sectsz];
+ } else {
+ /* lri refers to an existing log block; fetch it if not cached. */
+ rc = mlog_logblock_load_internal(mp, lri, buf);
+ if (!rc) {
+ /*
+ * NOTE: log block header length must be based
+ * on version since not guaranteed to be the latest
+ */
+ lbhlen = omf_logblock_header_len_le(*buf);
+
+ if (lbhlen < 0) {
+ rc = -ENODATA;
+ mp_pr_err("mpool %s, getting header length failed %ld",
+ rc, mp->pds_name, (long)lbhlen);
+ } else {
+ if (!lri->lri_roff)
+ /* First read with handle from this log block. */
+ lri->lri_roff = lbhlen;
+
+ if (lri->lri_roff == lbhlen)
+ *first = true;
+ }
+ }
+ }
+
+out:
+ if (rc) {
+ *buf = NULL;
+ *first = false;
+ }
+
+ return rc;
+}
+
+/**
+ * mlogutil_closeall() - Close all open user (non-mdc) mlogs in mpool and release resources.
+ *
+ * This is an mpool deactivation utility and not part of the mlog user API.
+ */
+void mlogutil_closeall(struct mpool_descriptor *mp)
+{
+ struct pmd_layout_mlpriv *this, *tmp;
+ struct pmd_layout *layout;
+
+ oml_layout_lock(mp);
+
+ rbtree_postorder_for_each_entry_safe(
+ this, tmp, &mp->pds_oml_root, mlp_nodeoml) {
+
+ layout = mlpriv2layout(this);
+
+ if (pmd_objid_type(layout->eld_objid) != OMF_OBJ_MLOG) {
+ mp_pr_warn("mpool %s, non-mlog object 0x%lx in open mlog layout tree",
+ mp->pds_name, (ulong)layout->eld_objid);
+ continue;
+ }
+
+ if (!pmd_objid_isuser(layout->eld_objid))
+ continue;
+
+ /* Remove layout from open list and discard log data. */
+ rb_erase(&this->mlp_nodeoml, &mp->pds_oml_root);
+ mlog_stat_free(layout);
+ }
+
+ oml_layout_unlock(mp);
+}
+
+/**
+ * mlog_getprops_cmn() - Retrieve basic mlog properties from layout.
+ * @mp:
+ * @layout:
+ * @prop:
+ */
+void
+mlog_getprops_cmn(struct mpool_descriptor *mp, struct pmd_layout *layout, struct mlog_props *prop)
+{
+ memcpy(prop->lpr_uuid.b, layout->eld_uuid.uuid, MPOOL_UUID_SIZE);
+ prop->lpr_objid = layout->eld_objid;
+ prop->lpr_alloc_cap = pmd_layout_cap_get(mp, layout);
+ prop->lpr_gen = layout->eld_gen;
+ prop->lpr_iscommitted = layout->eld_state & PMD_LYT_COMMITTED;
+ prop->lpr_mclassp = mp->pds_pdv[layout->eld_ld.ol_pdh].pdi_mclass;
+}
diff --git a/drivers/mpool/mlog_utils.h b/drivers/mpool/mlog_utils.h
new file mode 100644
index 000000000000..560548069c11
--- /dev/null
+++ b/drivers/mpool/mlog_utils.h
@@ -0,0 +1,63 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2015-2020 Micron Technology, Inc. All rights reserved.
+ */
+/*
+ * Defines functions for writing, reading, and managing the lifecycle of mlogs.
+ */
+
+#ifndef MPOOL_MLOG_UTILS_H
+#define MPOOL_MLOG_UTILS_H
+
+#include <linux/uio.h>
+#include <linux/mutex.h>
+
+struct pmd_layout;
+struct pmd_layout_mlpriv;
+struct mpool_descriptor;
+struct mlog_descriptor;
+struct mlog_read_iter;
+struct mlog_stat;
+struct mlog_props;
+
+/* "open mlog" rbtree operations... */
+#define oml_layout_lock(_mp) mutex_lock(&(_mp)->pds_oml_lock)
+#define oml_layout_unlock(_mp) mutex_unlock(&(_mp)->pds_oml_lock)
+
+struct pmd_layout_mlpriv *
+oml_layout_insert(struct mpool_descriptor *mp, struct pmd_layout_mlpriv *item);
+
+struct pmd_layout_mlpriv *oml_layout_remove(struct mpool_descriptor *mp, u64 key);
+
+void mlog_free_abuf(struct mlog_stat *lstat, int start, int end);
+
+void mlog_free_rbuf(struct mlog_stat *lstat, int start, int end);
+
+void mlog_extract_fsetparms(struct mlog_stat *lstat, u16 *sectsz, u32 *totsec,
+ u16 *nsecmb, u16 *nseclpg);
+
+int mlog_stat_init(struct mpool_descriptor *mp, struct mlog_descriptor *mlh, bool csem);
+
+void mlog_stat_free(struct pmd_layout *layout);
+
+void mlog_read_iter_init(struct pmd_layout *layout, struct mlog_stat *lstat,
+ struct mlog_read_iter *lri);
+
+void mlog_stat_init_common(struct pmd_layout *layout, struct mlog_stat *lstat);
+
+int mlog_populate_rbuf(struct mpool_descriptor *mp, struct pmd_layout *layout,
+ u16 *nsec, off_t *soff, bool skip_ser);
+
+void mlog_getprops_cmn(struct mpool_descriptor *mp, struct pmd_layout *layout,
+ struct mlog_props *prop);
+
+int mlog_logblocks_flush(struct mpool_descriptor *mp, struct pmd_layout *layout, bool skip_ser);
+
+s64 mlog_append_dmax(struct pmd_layout *layout);
+
+int mlog_update_append_idx(struct mpool_descriptor *mp, struct pmd_layout *layout, bool skip_ser);
+
+int mlog_logblock_load(struct mpool_descriptor *mp, struct mlog_read_iter *lri,
+ char **buf, bool *first);
+
+#endif /* MPOOL_MLOG_UTILS_H */
--
2.17.2
More information about the Linux-nvme
mailing list