[PATCH 0/9] nvmet: add genblk ZBD backend
Chaitanya Kulkarni
chaitanya.kulkarni at wdc.com
Wed Nov 25 21:40:34 EST 2020
Hi,
NVMeOF Host is capable of handling the NVMe Protocol based Zoned Block
Devices (ZBD) in the ZNS mode with the passthru backend. There is no
support for a generic block device backend to handle the ZBD devices
which are not NVMe devices.
This adds support to export the ZBD drives (which are not NVMe drives)
to host from the target with NVMeOF using the host side ZNS interface.
The patch series is generated in bottom-top manner where, it first adds
prep patch and ZNS command-specific handlers on the top of genblk and
updates the data structures, then one by one it wires up the admin cmds
in the order host calls them in namespace initializing sequence. Once
everything is ready, it wires-up the I/O command handlers. See below for
patch-series overview.
I've tested the ZoneFS testcases with the null_blk memory backed NVMeOF
namespace with nvme-loop transport. The same testcases are passing on the
NVMeOF zbd-ns and are passing for null_blk without NVMeOF .
Regards,
Chaitanya
Chaitanya Kulkarni (9):
block: export __bio_iov_append_get_pages()
Prep patch needed for implementing Zone Append.
nvmet: add ZNS support for bdev-ns
Core Command handlers and various helpers for ZBD backend which
will be called by target-core/target-admin etc.
nvmet: trim down id-desclist to use req->ns
Cleanup needed to avoid the code repetation for passing extra
function parameters for ZBD backend handlers.
nvmet: add NVME_CSI_ZNS in ns-desc for zbdev
Allows host to identify zoned namesapce.
nvmet: add cns-cs-ctrl in id-ctrl for ZNS bdev
Allows host to identify controller with the ZBD-ZNS.
nvmet: add cns-cs-ns in id-ctrl for ZNS bdev
Allows host to identify namespace with the ZBD-ZNS.
nvmet: add zns cmd effects to support zbdev
Allows host to support the ZNS commands when zoned-blkdev is
selected.
nvmet: add zns bdev config support
Allows user to override any target namespace attributes for
ZBD.
nvmet: add ZNS based I/O cmds handlers
Handlers for Zone-Mgmt-Send/Zone-Mgmt-Recv/Zone-Append.
block/bio.c | 3 +-
drivers/nvme/target/Makefile | 3 +-
drivers/nvme/target/admin-cmd.c | 38 ++-
drivers/nvme/target/io-cmd-bdev.c | 12 +
drivers/nvme/target/io-cmd-file.c | 2 +-
drivers/nvme/target/nvmet.h | 18 ++
drivers/nvme/target/zns.c | 390 ++++++++++++++++++++++++++++++
include/linux/bio.h | 1 +
8 files changed, 451 insertions(+), 16 deletions(-)
create mode 100644 drivers/nvme/target/zns.c
Test Report :-
# cat /sys/kernel/config/nvmet/subsystems/testnqn/namespaces/1/device_path
/dev/nullb1
# nvme list | tr -s ' ' ' '
Node SN Model Namespace Usage Format FW Rev
/dev/nvme1n1 212d336db96a4282 Linux 1 1.07 GB / 1.07 GB 4 KiB + 0 B 5.10.0-r
# ./zonefs-tests.sh /dev/nullb1
Gathering information on /dev/nullb1...
zonefs-tests on /dev/nullb1:
4 zones (0 conventional zones, 4 sequential zones)
524288 512B sectors zone size (256 MiB)
0 max open zones
Running tests
Test 0010: mkzonefs (options) ... PASS
Test 0011: mkzonefs (force format) ... PASS
Test 0012: mkzonefs (invalid device) ... FAIL
Test 0013: mkzonefs (super block zone state) ... FAIL
Test 0020: mount (default) ... PASS
Test 0021: mount (invalid device) ... PASS
Test 0022: mount (check mount directory sub-directories) ... PASS
Test 0023: mount (options) ... PASS
Test 0030: Number of files (default) ... PASS
Test 0031: Number of files (aggr_cnv) ... skip
Test 0032: Number of files using stat (default) ... PASS
Test 0033: Number of files using stat (aggr_cnv) ... PASS
Test 0034: Number of blocks using stat (default) ... PASS
Test 0035: Number of blocks using stat (aggr_cnv) ... PASS
Test 0040: Files permissions (default) ... PASS
Test 0041: Files permissions (aggr_cnv) ... skip
Test 0042: Files permissions (set value) ... PASS
Test 0043: Files permissions (set value + aggr_cnv) ... skip
Test 0050: Files owner (default) ... PASS
Test 0051: Files owner (aggr_cnv) ... skip
Test 0052: Files owner (set value) ... PASS
Test 0053: Files owner (set value + aggr_cnv) ... skip
Test 0060: Files size (default) ... PASS
Test 0061: Files size (aggr_cnv) ... skip
Test 0070: Conventional file truncate ... skip
Test 0071: Conventional file truncate (aggr_cnv) ... skip
Test 0072: Conventional file unlink ... skip
Test 0073: Conventional file unlink (aggr_cnv) ... skip
Test 0074: Conventional file random write ... skip
Test 0075: Conventional file random write (direct) ... skip
Test 0076: Conventional file random write (aggr_cnv) ... skip
Test 0077: Conventional file random write (aggr_cnv, direct) ... skip
Test 0078: Conventional file mmap read/write ... skip
Test 0079: Conventional file mmap read/write (aggr_cnv) ... skip
Test 0080: Sequential file truncate ... PASS
Test 0081: Sequential file unlink ... PASS
Test 0082: Sequential file buffered write IO ... PASS
Test 0083: Sequential file overwrite ... PASS
Test 0084: Sequential file unaligned write (sync IO) ... PASS
Test 0085: Sequential file unaligned write (async IO) ... PASS
Test 0086: Sequential file append (sync) ... PASS
Test 0087: Sequential file append (async) ... PASS
Test 0088: Sequential file random read ... PASS
Test 0089: Sequential file mmap read/write ... PASS
Test 0090: sequential file 4K synchronous write ... PASS
Test 0091: Sequential file large synchronous write ... PASS
44 / 46 tests passed
#
#
# ./zonefs-tests.sh /dev/nvme1n1
Gathering information on /dev/nvme1n1...
zonefs-tests on /dev/nvme1n1:
4 zones (0 conventional zones, 4 sequential zones)
524288 512B sectors zone size (256 MiB)
1 max open zones
Running tests
Test 0010: mkzonefs (options) ... PASS
Test 0011: mkzonefs (force format) ... PASS
Test 0012: mkzonefs (invalid device) ... FAIL
Test 0013: mkzonefs (super block zone state) ... FAIL
Test 0020: mount (default) ... PASS
Test 0021: mount (invalid device) ... PASS
Test 0022: mount (check mount directory sub-directories) ... PASS
Test 0023: mount (options) ... PASS
Test 0030: Number of files (default) ... PASS
Test 0031: Number of files (aggr_cnv) ... skip
Test 0032: Number of files using stat (default) ... PASS
Test 0033: Number of files using stat (aggr_cnv) ... PASS
Test 0034: Number of blocks using stat (default) ... PASS
Test 0035: Number of blocks using stat (aggr_cnv) ... PASS
Test 0040: Files permissions (default) ... PASS
Test 0041: Files permissions (aggr_cnv) ... skip
Test 0042: Files permissions (set value) ... PASS
Test 0043: Files permissions (set value + aggr_cnv) ... skip
Test 0050: Files owner (default) ... PASS
Test 0051: Files owner (aggr_cnv) ... skip
Test 0052: Files owner (set value) ... PASS
Test 0053: Files owner (set value + aggr_cnv) ... skip
Test 0060: Files size (default) ... PASS
Test 0061: Files size (aggr_cnv) ... skip
Test 0070: Conventional file truncate ... skip
Test 0071: Conventional file truncate (aggr_cnv) ... skip
Test 0072: Conventional file unlink ... skip
Test 0073: Conventional file unlink (aggr_cnv) ... skip
Test 0074: Conventional file random write ... skip
Test 0075: Conventional file random write (direct) ... skip
Test 0076: Conventional file random write (aggr_cnv) ... skip
Test 0077: Conventional file random write (aggr_cnv, direct) ... skip
Test 0078: Conventional file mmap read/write ... skip
Test 0079: Conventional file mmap read/write (aggr_cnv) ... skip
Test 0080: Sequential file truncate ... PASS
Test 0081: Sequential file unlink ... PASS
Test 0082: Sequential file buffered write IO ... PASS
Test 0083: Sequential file overwrite ... PASS
Test 0084: Sequential file unaligned write (sync IO) ... PASS
Test 0085: Sequential file unaligned write (async IO) ... PASS
Test 0086: Sequential file append (sync) ... PASS
Test 0087: Sequential file append (async) ... PASS
Test 0088: Sequential file random read ... PASS
Test 0089: Sequential file mmap read/write ... PASS
Test 0090: sequential file 4K synchronous write ... PASS
Test 0091: Sequential file large synchronous write ... PASS
44 / 46 tests passed
--
2.22.1
More information about the Linux-nvme
mailing list