[PATCH v4 09/19] lpfc: vmid: VMID params initialization

[Hannes Reinecke]

On 11/9/20 5:23 AM, Muneendra wrote:
> From: Gaurav Srivastava <gaurav.srivastava at broadcom.com>
> 
> This patch initializes the VMID parameters like the type of vmid, max
> number of vmids supported and timeout value for the vmid registration
> based on the user input.
> 
> Signed-off-by: Gaurav Srivastava  <gaurav.srivastava at broadcom.com>
> Signed-off-by: James Smart <jsmart2021 at gmail.com>
> 
> ---
> v4:
> No change
> 
> v3:
> No change
> 
> v2:
> Ported the patch on top of 5.10/scsi-queue
> ---
>   drivers/scsi/lpfc/lpfc_attr.c | 47 +++++++++++++++++++++++++++++++++++
>   1 file changed, 47 insertions(+)
> 
> diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
> index e94eac194676..e73997bce65c 100644
> --- a/drivers/scsi/lpfc/lpfc_attr.c
> +++ b/drivers/scsi/lpfc/lpfc_attr.c
> @@ -6138,6 +6138,44 @@ LPFC_BBCR_ATTR_RW(enable_bbcr, 1, 0, 1, "Enable BBC Recovery");
>    */
>   LPFC_ATTR_RW(enable_dpp, 1, 0, 1, "Enable Direct Packet Push");
>   
> +/*
> + * lpfc_max_vmid: Maximum number of VMs to be tagged. This is valid only if
> + * either vmid_app_header or vmid_priority_tagging is enabled.
> + *       4 - 255  = vmid support enabled for 4-255 VMs
> + *       Value range is [4,255].
> + */
> +LPFC_ATTR_RW(max_vmid, LPFC_MIN_VMID, LPFC_MIN_VMID, LPFC_MAX_VMID,
> +	     "Maximum number of VMs supported");
> +
> +/*
> + * lpfc_vmid_inactivity_timeout: Inactivity timeout duration in hours
> + *       0  = Timeout is disabled
> + * Value range is [0,24].
> + */
> +LPFC_ATTR_RW(vmid_inactivity_timeout, 4, 0, 24,
> +	     "Inactivity timeout in hours");
> +
> +/*
> + * lpfc_vmid_app_header: Enable App Header VMID support
> + *       0  = Support is disabled (default)
> + *       1  = Support is enabled
> + * Value range is [0,1].
> + */
> +LPFC_ATTR_RW(vmid_app_header, LPFC_VMID_APP_HEADER_DISABLE,
> +	     LPFC_VMID_APP_HEADER_DISABLE, LPFC_VMID_APP_HEADER_ENABLE,
> +	     "Enable App Header VMID support");
> +
> +/*
> + * lpfc_vmid_priority_tagging: Enable Priority Tagging VMID support
> + *       0  = Support is disabled (default)
> + *       1  = Support is enabled
> + * Value range is [0,1]..
> + */
> +LPFC_ATTR_RW(vmid_priority_tagging, LPFC_VMID_PRIO_TAG_DISABLE,
> +	     LPFC_VMID_PRIO_TAG_DISABLE,
> +	     LPFC_VMID_PRIO_TAG_ALL_TARGETS,
> +	     "Enable Priority Tagging VMID support");
> +
>   struct device_attribute *lpfc_hba_attrs[] = {
>   	&dev_attr_nvme_info,
>   	&dev_attr_scsi_stat,
> @@ -6255,6 +6293,10 @@ struct device_attribute *lpfc_hba_attrs[] = {
>   	&dev_attr_lpfc_ras_fwlog_func,
>   	&dev_attr_lpfc_enable_bbcr,
>   	&dev_attr_lpfc_enable_dpp,
> +	&dev_attr_lpfc_max_vmid,
> +	&dev_attr_lpfc_vmid_inactivity_timeout,
> +	&dev_attr_lpfc_vmid_app_header,
> +	&dev_attr_lpfc_vmid_priority_tagging,
>   	NULL,
>   };
>   
> @@ -7314,6 +7356,11 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
>   	lpfc_enable_hba_heartbeat_init(phba, lpfc_enable_hba_heartbeat);
>   
>   	lpfc_EnableXLane_init(phba, lpfc_EnableXLane);
> +	/* VMID Inits */
> +	lpfc_max_vmid_init(phba, lpfc_max_vmid);
> +	lpfc_vmid_inactivity_timeout_init(phba, lpfc_vmid_inactivity_timeout);
> +	lpfc_vmid_app_header_init(phba, lpfc_vmid_app_header);
> +	lpfc_vmid_priority_tagging_init(phba, lpfc_vmid_priority_tagging);
>   	if (phba->sli_rev != LPFC_SLI_REV4)
>   		phba->cfg_EnableXLane = 0;
>   	lpfc_XLanePriority_init(phba, lpfc_XLanePriority);
> 
Reviewed-by: Hannes Reinecke <hare at suse.de>

Cheers,

Hannes
-- 
Dr. Hannes Reinecke                Kernel Storage Architect
hare at suse.de                              +49 911 74053 688
SUSE Software Solutions GmbH, Maxfeldstr. 5, 90409 Nürnberg
HRB 36809 (AG Nürnberg), Geschäftsführer: Felix Imendörffer