[PATCH] mmc: core: Initial support for SD express card/host
Ulf Hansson
ulf.hansson at linaro.org
Thu Jul 16 10:15:34 EDT 2020
In the SD specification v7.10 the SD express card has been added. This new
type of removable SD card, can be managed via a PCIe/NVMe based interface,
while also allowing backwards compatibility towards the legacy SD
interface.
To keep the backwards compatibility, it's required to start the
initialization through the legacy SD interface. If it turns out that the
mmc host and the SD card, both supports the PCIe/NVMe interface, then a
switch should be allowed.
Therefore, let's introduce some basic support for this type of SD cards to
the mmc core. The mmc host, should set MMC_CAP2_SD_EXP if it supports this
interface and MMC_CAP2_SD_EXP_1_2V, if also 1.2V is supported, as to inform
the core about it.
To deal with the switch to the PCIe/NVMe interface, the mmc host is
required to implement a new host ops, ->init_sd_express(). Based on the
initial communication between the host and the card, host->ios.timing is
set to either MMC_TIMING_SD_EXP or MMC_TIMING_SD_EXP_1_2V, depending on if
1.2V is supported or not. In this way, the mmc host can check these values
in its ->init_sd_express() ops, to know how to proceed with the handover.
Note that, to manage card insert/removal, the mmc core sticks with using
the ->get_cd() callback, which means it's the host's responsibility to make
sure it provides valid data, even if the card may be managed by PCIe/NVMe
at the moment. As long as the card seems to be present, the mmc core keeps
the card powered on.
Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
Cc: Arnd Bergmann <arnd at arndb.de>
Cc: Christoph Hellwig <hch at lst.de>
Cc: Rui Feng <rui_feng at realsil.com.cn>
Signed-off-by: Ulf Hansson <ulf.hansson at linaro.org>
---
drivers/mmc/core/core.c | 15 ++++++++++--
drivers/mmc/core/host.h | 6 +++++
drivers/mmc/core/sd_ops.c | 49 +++++++++++++++++++++++++++++++++++++--
drivers/mmc/core/sd_ops.h | 1 +
include/linux/mmc/host.h | 7 ++++++
5 files changed, 74 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 8ccae6452b9c..6673c0f33cc7 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -2137,8 +2137,12 @@ static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq)
mmc_go_idle(host);
- if (!(host->caps2 & MMC_CAP2_NO_SD))
- mmc_send_if_cond(host, host->ocr_avail);
+ if (!(host->caps2 & MMC_CAP2_NO_SD)) {
+ if (mmc_send_if_cond_pcie(host, host->ocr_avail))
+ goto out;
+ if (mmc_card_sd_express(host))
+ return 0;
+ }
/* Order's important: probe SDIO, then SD, then MMC */
if (!(host->caps2 & MMC_CAP2_NO_SDIO))
@@ -2153,6 +2157,7 @@ static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq)
if (!mmc_attach_mmc(host))
return 0;
+out:
mmc_power_off(host);
return -EIO;
}
@@ -2280,6 +2285,12 @@ void mmc_rescan(struct work_struct *work)
goto out;
}
+ /* If an SD express card is present, then leave it as is. */
+ if (mmc_card_sd_express(host)) {
+ mmc_release_host(host);
+ goto out;
+ }
+
for (i = 0; i < ARRAY_SIZE(freqs); i++) {
unsigned int freq = freqs[i];
if (freq > host->f_max) {
diff --git a/drivers/mmc/core/host.h b/drivers/mmc/core/host.h
index 5e3b9534ffb2..ba407617ed23 100644
--- a/drivers/mmc/core/host.h
+++ b/drivers/mmc/core/host.h
@@ -77,5 +77,11 @@ static inline bool mmc_card_hs400es(struct mmc_card *card)
return card->host->ios.enhanced_strobe;
}
+static inline bool mmc_card_sd_express(struct mmc_host *host)
+{
+ return host->ios.timing == MMC_TIMING_SD_EXP ||
+ host->ios.timing == MMC_TIMING_SD_EXP_1_2V;
+}
+
#endif
diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c
index 22bf528294b9..d61ff811218c 100644
--- a/drivers/mmc/core/sd_ops.c
+++ b/drivers/mmc/core/sd_ops.c
@@ -158,7 +158,8 @@ int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
return err;
}
-int mmc_send_if_cond(struct mmc_host *host, u32 ocr)
+static int __mmc_send_if_cond(struct mmc_host *host, u32 ocr, u8 pcie_bits,
+ u32 *resp)
{
struct mmc_command cmd = {};
int err;
@@ -171,7 +172,7 @@ int mmc_send_if_cond(struct mmc_host *host, u32 ocr)
* SD 1.0 cards.
*/
cmd.opcode = SD_SEND_IF_COND;
- cmd.arg = ((ocr & 0xFF8000) != 0) << 8 | test_pattern;
+ cmd.arg = ((ocr & 0xFF8000) != 0) << 8 | pcie_bits << 8 | test_pattern;
cmd.flags = MMC_RSP_SPI_R7 | MMC_RSP_R7 | MMC_CMD_BCR;
err = mmc_wait_for_cmd(host, &cmd, 0);
@@ -186,6 +187,50 @@ int mmc_send_if_cond(struct mmc_host *host, u32 ocr)
if (result_pattern != test_pattern)
return -EIO;
+ if (resp)
+ *resp = cmd.resp[0];
+
+ return 0;
+}
+
+int mmc_send_if_cond(struct mmc_host *host, u32 ocr)
+{
+ return __mmc_send_if_cond(host, ocr, 0, NULL);
+}
+
+int mmc_send_if_cond_pcie(struct mmc_host *host, u32 ocr)
+{
+ u32 resp = 0;
+ u8 pcie_bits = 0;
+ int ret;
+
+ if (host->caps2 & MMC_CAP2_SD_EXP) {
+ /* Probe card for SD express support via PCIe. */
+ pcie_bits = 0x10;
+ if (host->caps2 & MMC_CAP2_SD_EXP_1_2V)
+ /* Probe also for 1.2V support. */
+ pcie_bits = 0x30;
+ }
+
+ ret = __mmc_send_if_cond(host, ocr, pcie_bits, &resp);
+ if (ret)
+ return 0;
+
+ /* Continue with the SD express init, if the card supports it. */
+ resp &= 0x3000;
+ if (pcie_bits && resp) {
+ if (resp == 0x3000)
+ host->ios.timing = MMC_TIMING_SD_EXP_1_2V;
+ else
+ host->ios.timing = MMC_TIMING_SD_EXP;
+
+ /*
+ * According to the spec the clock shall also be gated, but
+ * let's leave this to the host driver for more flexibility.
+ */
+ return host->ops->init_sd_express(host, &host->ios);
+ }
+
return 0;
}
diff --git a/drivers/mmc/core/sd_ops.h b/drivers/mmc/core/sd_ops.h
index 2194cabfcfc5..3ba7b3cf4652 100644
--- a/drivers/mmc/core/sd_ops.h
+++ b/drivers/mmc/core/sd_ops.h
@@ -16,6 +16,7 @@ struct mmc_host;
int mmc_app_set_bus_width(struct mmc_card *card, int width);
int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr);
int mmc_send_if_cond(struct mmc_host *host, u32 ocr);
+int mmc_send_if_cond_pcie(struct mmc_host *host, u32 ocr);
int mmc_send_relative_addr(struct mmc_host *host, unsigned int *rca);
int mmc_app_send_scr(struct mmc_card *card);
int mmc_sd_switch(struct mmc_card *card, int mode, int group,
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index c5b6e97cb21a..905cddc5e6f3 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -60,6 +60,8 @@ struct mmc_ios {
#define MMC_TIMING_MMC_DDR52 8
#define MMC_TIMING_MMC_HS200 9
#define MMC_TIMING_MMC_HS400 10
+#define MMC_TIMING_SD_EXP 11
+#define MMC_TIMING_SD_EXP_1_2V 12
unsigned char signal_voltage; /* signalling voltage (1.8V or 3.3V) */
@@ -172,6 +174,9 @@ struct mmc_host_ops {
*/
int (*multi_io_quirk)(struct mmc_card *card,
unsigned int direction, int blk_size);
+
+ /* Initialize an SD express card, mandatory for MMC_CAP2_SD_EXP. */
+ int (*init_sd_express)(struct mmc_host *host, struct mmc_ios *ios);
};
struct mmc_cqe_ops {
@@ -357,6 +362,8 @@ struct mmc_host {
#define MMC_CAP2_HS200_1_2V_SDR (1 << 6) /* can support */
#define MMC_CAP2_HS200 (MMC_CAP2_HS200_1_8V_SDR | \
MMC_CAP2_HS200_1_2V_SDR)
+#define MMC_CAP2_SD_EXP (1 << 7) /* SD express via PCIe */
+#define MMC_CAP2_SD_EXP_1_2V (1 << 8) /* SD express 1.2V */
#define MMC_CAP2_CD_ACTIVE_HIGH (1 << 10) /* Card-detect signal active high */
#define MMC_CAP2_RO_ACTIVE_HIGH (1 << 11) /* Write-protect signal active high */
#define MMC_CAP2_NO_PRESCAN_POWERUP (1 << 14) /* Don't power up before scan */
--
2.20.1
More information about the Linux-nvme
mailing list