[PATCH 4/4] block: add attributes to zone report

[Javier González]

From: Javier González <javier.gonz at samsung.com>

Add zone attributes field to the blk_zone structure. Use ZNS attributes
as base for zoned block devices and add the current atributes in
ZAC/ZBC.

Signed-off-by: Javier González <javier.gonz at samsung.com>
Signed-off-by: SelvaKumar S <selvakuma.s1 at samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k at samsung.com>
Signed-off-by: Nitesh Shetty <nj.shetty at samsung.com>
---
 drivers/nvme/host/zns.c       |  3 ++-
 drivers/scsi/sd.c             |  2 +-
 drivers/scsi/sd_zbc.c         |  8 ++++++--
 include/uapi/linux/blkzoned.h | 26 +++++++++++++++++++++++++-
 4 files changed, 34 insertions(+), 5 deletions(-)

diff --git a/drivers/nvme/host/zns.c b/drivers/nvme/host/zns.c
index d785d179a343..749382a14968 100644
--- a/drivers/nvme/host/zns.c
+++ b/drivers/nvme/host/zns.c
@@ -118,7 +118,7 @@ int nvme_update_zone_info(struct gendisk *disk, struct nvme_ns *ns,
 	}
 
 	q->limits.zoned = BLK_ZONED_HM;
-	q->zone_flags = BLK_ZONE_REP_CAPACITY | BLK_ZONE_REP_OFFLINE;
+	q->zone_flags = BLK_ZONE_REP_CAPACITY | BLK_ZONE_REP_CAPACITY | BLK_ZONE_REP_OFFLINE;
 	blk_queue_flag_set(QUEUE_FLAG_ZONE_RESETALL, q);
 free_data:
 	kfree(id);
@@ -197,6 +197,7 @@ static int nvme_zone_parse_entry(struct nvme_ns *ns,
 	zone.capacity = nvme_lba_to_sect(ns, le64_to_cpu(entry->zcap));
 	zone.start = nvme_lba_to_sect(ns, le64_to_cpu(entry->zslba));
 	zone.wp = nvme_lba_to_sect(ns, le64_to_cpu(entry->wp));
+	zone.attr = entry->za;
 
 	return cb(&zone, idx, data);
 }
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index b9c920bace28..63270598aa76 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2967,7 +2967,7 @@ static void sd_read_block_characteristics(struct scsi_disk *sdkp)
 	if (sdkp->device->type == TYPE_ZBC) {
 		/* Host-managed */
 		q->limits.zoned = BLK_ZONED_HM;
-		q->zone_flags = BLK_ZONE_REP_CAPACITY;
+		q->zone_flags = BLK_ZONE_REP_CAPACITY | BLK_ZONE_REP_ATTR;
 	} else {
 		sdkp->zoned = (buffer[8] >> 4) & 3;
 		if (sdkp->zoned == 1 && !disk_has_partitions(sdkp->disk)) {
diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c
index 183a20720da9..51c7f82b59c5 100644
--- a/drivers/scsi/sd_zbc.c
+++ b/drivers/scsi/sd_zbc.c
@@ -53,10 +53,14 @@ static int sd_zbc_parse_report(struct scsi_disk *sdkp, u8 *buf,
 
 	zone.type = buf[0] & 0x0f;
 	zone.cond = (buf[1] >> 4) & 0xf;
-	if (buf[1] & 0x01)
+	if (buf[1] & 0x01) {
+		zone.attr |= BLK_ZONE_ATTR_NRW;
 		zone.reset = 1;
-	if (buf[1] & 0x02)
+	}
+	if (buf[1] & 0x02) {
+		zone.attr |= BLK_ZONE_ATTR_NSQ;
 		zone.non_seq = 1;
+	}
 
 	zone.len = logical_to_sectors(sdp, get_unaligned_be64(&buf[8]));
 	zone.capacity = zone.len;
diff --git a/include/uapi/linux/blkzoned.h b/include/uapi/linux/blkzoned.h
index e5adf4a9f4b0..315617827acd 100644
--- a/include/uapi/linux/blkzoned.h
+++ b/include/uapi/linux/blkzoned.h
@@ -78,10 +78,33 @@ enum blk_zone_cond {
  *
  * @BLK_ZONE_REP_CAPACITY: Zone descriptor has capacity field.
  * @BLK_ZONE_REP_OFFLINE : Zone device supports offline transition.
+ * @BLK_ZONE_REP_ATTR: Zone attributes reported.
  */
 enum blk_zone_report_flags {
 	BLK_ZONE_REP_CAPACITY	= (1 << 0),
 	BLK_ZONE_REP_OFFLINE	= (1 << 1),
+	BLK_ZONE_REP_ATTR	= (1 << 2),
+};
+
+/**
+ * enum blk_zone_attr - Zone Attributes
+ *
+ * Attributes of the zone. Reported in struct blk_zone -> attr
+ *
+ * @BLK_ZONE_ATTR_ZFC: Zone Finished by Controller due to a zone active excursion
+ * @BLK_ZONE_ATTR_FZR: Finish Zone Recommended required by controller
+ * @BLK_ZONE_ATTR_RZR: Reset Zone Recommended required by controller
+ * @BLK_ZONE_ATTR_NSQ: Non Sequential zone
+ * @BLK_ZONE_ATTR_NRW: Need Reset Write Pointer required by controller
+ * @BLK_ZONE_ATTR_ZDEV: Zone Descriptor Extension Valid in zone report
+ */
+enum blk_zone_attr {
+	BLK_ZONE_ATTR_ZFC	= 1 << 0,
+	BLK_ZONE_ATTR_FZR	= 1 << 1,
+	BLK_ZONE_ATTR_RZR	= 1 << 2,
+	BLK_ZONE_ATTR_NSQ	= 1 << 3,
+	BLK_ZONE_ATTR_NRW	= 1 << 4,
+	BLK_ZONE_ATTR_ZDEV	= 1 << 7,
 };
 
 /**
@@ -110,7 +133,8 @@ struct blk_zone {
 	__u8	cond;		/* Zone condition */
 	__u8	non_seq;	/* Non-sequential write resources active */
 	__u8	reset;		/* Reset write pointer recommended */
-	__u8	resv[4];
+	__u8	attr;		/* Zone attributes */
+	__u8	resv[3];
 	__u64	capacity;	/* Zone capacity in number of sectors */
 	__u8	reserved[24];
 };
-- 
2.17.1