[RFC PATCH v2 0/2] add simple copy support

[javier.gonz@samsung.com]

On 04.12.2020 23:40, Keith Busch wrote:
>On Fri, Dec 04, 2020 at 11:25:12AM +0000, Damien Le Moal wrote:
>> On 2020/12/04 20:02, SelvaKumar S wrote:
>> > This patchset tries to add support for TP4065a ("Simple Copy Command"),
>> > v2020.05.04 ("Ratified")
>> >
>> > The Specification can be found in following link.
>> > https://nvmexpress.org/wp-content/uploads/NVM-Express-1.4-Ratified-TPs-1.zip
>> >
>> > This is an RFC. Looking forward for any feedbacks or other alternate
>> > designs for plumbing simple copy to IO stack.
>> >
>> > Simple copy command is a copy offloading operation and is  used to copy
>> > multiple contiguous ranges (source_ranges) of LBA's to a single destination
>> > LBA within the device reducing traffic between host and device.
>> >
>> > This implementation accepts destination, no of sources and arrays of
>> > source ranges from application and attach it as payload to the bio and
>> > submits to the device.
>> >
>> > Following limits are added to queue limits and are exposed in sysfs
>> > to userspace
>> > 	- *max_copy_sectors* limits the sum of all source_range length
>> > 	- *max_copy_nr_ranges* limits the number of source ranges
>> > 	- *max_copy_range_sectors* limit the maximum number of sectors
>> > 		that can constitute a single source range.
>>
>> Same comment as before. I think this is a good start, but for this to be really
>> useful to users and kernel components alike, this really needs copy emulation
>> for drives that do not have a native copy feature, similarly to what write zeros
>> handling for instance: if the drive does not have a copy command (simple copy
>> for NVMe or XCOPY for scsi), then the block layer should issue read/write
>> commands to seamlessly execute the copy. Otherwise, this will only serve a small
>> niche for users and will not be optimal for FS and DM drivers that could be
>> simplified with a generic block layer copy functionality.
>>
>> This is my 10 cents though, others may differ about this.
>
>Yes, I agree that copy emulation support should be included with the
>hardware enabled solution.

Keith, Damien,

Can we do the block layer emulation with this patchset and then work in
follow-up patchses on (i) the FS interface with F2FS as a first user and
(ii) other HW accelerations such as XCOPY?

For XCOPY, I believe we need to have a separate discussion as much works
is already done that we should align to.