[V5] nvme: enable ro namespace for ZNS without append

javier at javigon.com javier at javigon.com
Tue Dec 1 07:02:21 EST 2020


From: Javier González <javier.gonz at samsung.com>

Allow ZNS NVMe SSDs to present a read-only namespace when append is not
supported, instead of rejecting the namespace directly.

This allows (i) the namespace to be used in read-only mode, which is not
a problem as the append command only affects the write path, and (ii) to
use standard management tools such as nvme-cli to choose a different
format or firmware slot that is compatible with the Linux zoned block
device.

This patch includes comments from Christoph, Niklas and Keith that
applied to a different approach setting capacity to 0
  https://www.spinics.net/lists/linux-block/msg60747.html

The reminder of the original patch will be submitted separately.

Changes since V4:
  - Revert re-reading effects to page. Wait for patches from Christoph
    on RO flag refactoring that allow to clear the flags.

Changes since V3:
  - Force re-reading effects log page (from Keith)
  - Pending proper refresh of RO flag - dependency on patch from
    Christoph

Changes since V2:
  - Fix small conflict with a queued patch from Sagi (from Christoph)
  - Fix indentation (from Niklas)
  - Refresh effects log page to account for FW changes (from Keith)

Changes since V1:
  - Change logic to use NVME_NS_ATTR_RO (from Christoph)
  - Set max_zone_append egen in RO. This allows the device to be
    properly revalidated and enables user-space tools such as blkzone to
    be used when interacting with this zoned device.

Signed-off-by: Javier González <javier.gonz at samsung.com>
---
 drivers/nvme/host/core.c |  2 +-
 drivers/nvme/host/nvme.h |  1 +
 drivers/nvme/host/zns.c  | 14 +++++++++-----
 3 files changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index f42ed266bd7f..49ba21e89467 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -2113,7 +2113,7 @@ static void nvme_update_disk_info(struct gendisk *disk,
 	nvme_config_discard(disk, ns);
 	nvme_config_write_zeroes(disk, ns);
 
-	if (id->nsattr & NVME_NS_ATTR_RO)
+	if (id->nsattr & NVME_NS_ATTR_RO || test_bit(NVME_NS_FORCE_RO, &ns->flags))
 		set_disk_ro(disk, true);
 }
 
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index ae017f727798..bfcedfa4b057 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -452,6 +452,7 @@ struct nvme_ns {
 #define NVME_NS_REMOVING	0
 #define NVME_NS_DEAD     	1
 #define NVME_NS_ANA_PENDING	2
+#define NVME_NS_FORCE_RO	3
 
 	struct nvme_fault_inject fault_inject;
 
diff --git a/drivers/nvme/host/zns.c b/drivers/nvme/host/zns.c
index 67e87e9f306f..c2b557452483 100644
--- a/drivers/nvme/host/zns.c
+++ b/drivers/nvme/host/zns.c
@@ -55,12 +55,16 @@ int nvme_update_zone_info(struct nvme_ns *ns, unsigned lbaf)
 	int status;
 
 	/* Driver requires zone append support */
-	if (!(le32_to_cpu(log->iocs[nvme_cmd_zone_append]) &
-			NVME_CMD_EFFECTS_CSUPP)) {
+	if ((le32_to_cpu(log->iocs[nvme_cmd_zone_append]) & NVME_CMD_EFFECTS_CSUPP)) {
+		if (test_and_clear_bit(NVME_NS_FORCE_RO, &ns->flags))
+			dev_warn(ns->ctrl->device,
+				 "append supported for zoned namespace:%d. Remove read-only mode\n",
+				 ns->head->ns_id);
+	} else {
+		set_bit(NVME_NS_FORCE_RO, &ns->flags);
 		dev_warn(ns->ctrl->device,
-			"append not supported for zoned namespace:%d\n",
-			ns->head->ns_id);
-		return -EINVAL;
+			 "append not supported for zoned namespace:%d. Forcing to read-only mode\n",
+			 ns->head->ns_id);
 	}
 
 	/* Lazily query controller append limit for the first zoned namespace */
-- 
2.17.1




More information about the Linux-nvme mailing list