[pci PATCH v8 0/4] Add support for unmanaged SR-IOV

Bjorn Helgaas helgaas at kernel.org
Sat Apr 21 13:34:37 PDT 2018


On Fri, Apr 20, 2018 at 12:28:08PM -0400, Alexander Duyck wrote:
> This series is meant to add support for SR-IOV on devices when the VFs are
> not managed by the kernel. Examples of recent patches attempting to do this
> include:
> virto - https://patchwork.kernel.org/patch/10241225/
> pci-stub - https://patchwork.kernel.org/patch/10109935/
> vfio - https://patchwork.kernel.org/patch/10103353/
> uio - https://patchwork.kernel.org/patch/9974031/
> 
> Since this is quickly blowing up into a multi-driver problem it is probably
> best to implement this solution as generically as possible.
> 
> This series is an attempt to do that. What we do with this patch set is
> provide a generic framework to enable SR-IOV in the case that the PF driver
> doesn't support managing the VFs itself.
> 
> I based my patch set originally on the patch by Mark Rustad but there isn't
> much left after going through and cleaning out the bits that were no longer
> needed, and after incorporating the feedback from David Miller. At this point
> the only items to be fully reused was his patch description which is now
> present in patch 3 of the set.
> 
> This solution is limited in scope to just adding support for devices that
> provide no functionality for SR-IOV other than allocating the VFs by
> calling pci_enable_sriov. Previous sets had included patches for VFIO, but
> for now I am dropping that as the scope of that work is larger then I
> think I can take on at this time.
> 
> v2: Reduced scope back to just virtio_pci and vfio-pci
>     Broke into 3 patch set from single patch
>     Changed autoprobe behavior to always set when num_vfs is set non-zero
> v3: Updated Documentation to clarify when sriov_unmanaged_autoprobe is used
>     Wrapped vfio_pci_sriov_configure to fix build errors w/o SR-IOV in kernel
> v4: Dropped vfio-pci patch
>     Added ena and nvme to drivers now using pci_sriov_configure_unmanaged
>     Dropped pci_disable_sriov call in virtio_pci to be consistent with ena
> v5: Dropped sriov_unmanaged_autoprobe and pci_sriov_conifgure_unmanaged
>     Added new patch that enables pci_sriov_configure_simple
>     Updated drivers to use pci_sriov_configure_simple
> v6: Defined pci_sriov_configure_simple as NULL when SR-IOV is not enabled
>     Updated drivers to drop "#ifdef" checks for IOV
>     Added pci-pf-stub as place for PF-only drivers to add support
> v7: Dropped pci_id table explanation from pci-pf-stub driver
>     Updated pci_sriov_configure_simple to drop need for err value
>     Fixed comment explaining why pci_sriov_configure_simple is NULL
> v8: Dropped virtio from the set, support to be added later after TC approval
> 
> Cc: Mark Rustad <mark.d.rustad at intel.com>
> Cc: Maximilian Heyne <mheyne at amazon.de>
> Cc: Liang-Min Wang <liang-min.wang at intel.com>
> Cc: David Woodhouse <dwmw at amazon.co.uk>
> 
> ---
> 
> Alexander Duyck (4):
>       pci: Add pci_sriov_configure_simple for PFs that don't manage VF resources
>       ena: Migrate over to unmanaged SR-IOV support
>       nvme: Migrate over to unmanaged SR-IOV support
>       pci-pf-stub: Add PF driver stub for PFs that function only to enable VFs
> 
> 
>  drivers/net/ethernet/amazon/ena/ena_netdev.c |   28 -------------
>  drivers/nvme/host/pci.c                      |   20 ----------
>  drivers/pci/Kconfig                          |   12 ++++++
>  drivers/pci/Makefile                         |    2 +
>  drivers/pci/iov.c                            |   31 +++++++++++++++
>  drivers/pci/pci-pf-stub.c                    |   54 ++++++++++++++++++++++++++
>  include/linux/pci.h                          |    3 +
>  include/linux/pci_ids.h                      |    2 +
>  8 files changed, 106 insertions(+), 46 deletions(-)
>  create mode 100644 drivers/pci/pci-pf-stub.c

I tentatively applied these to pci/virtualization-review.

The code changes look fine, but I want to flesh out the changelogs a
little bit before merging them.

For example, I'm not sure what you mean by "devices where the PF is
not capable of managing VF resources."

It *sounds* like you're saying the hardware works differently on some
devices, but I don't think that's what you mean.  I think you're
saying something about which drivers are used for the PF and the VF.

I think a trivial example of how this will be used might help.  I
assume this involves a virtualization scenario where the host uses the
PF to enable several VFs, but the host doesn't use the PF for much
else.  Then you assign the VFs to guests, and drivers in the guest
OSes use the VFs.

Since .sriov_configure() is only used by sriov_numvfs_store(), I
assume the usage model involves writing to the sysfs sriov_numvfs
attribute to enable the VFs, then assigning them to guests?

Bjorn



More information about the Linux-nvme mailing list