mlx4_core 0000:07:00.0: swiotlb buffer is full and OOM observed during stress test on reset_controller

Leon Romanovsky leon at kernel.org
Sun Mar 5 00:12:06 PST 2017 

On Fri, Mar 03, 2017 at 06:55:11AM -0500, Yi Zhang wrote:
> Hi experts
>
> I reproduced this issue during stress test on reset_controller, could you help check it, thanks.
>
> Reproduce steps on initiator side:
> num=0
> while [ 1 ]
> do
> 	echo "-------------------------------$num"
> 	echo 1 >/sys/block/nvme0n1/device/reset_controller || exit 1
> 	((num++))
> done
>
> Here is the full log:
> http://pastebin.com/mek9fb0b
>
> Target side log:
> [  326.411481] nvmet: creating controller 1061 for NQN nqn.2014-08.org.nvmexpress:NVMf:uuid:32413b2b-89cc-4939-b816-399ff293800d.
> [  326.516226] nvmet: adding queue 1 to ctrl 1061.
> [  326.516428] nvmet: adding queue 2 to ctrl 1061.
> [  326.516616] nvmet: adding queue 3 to ctrl 1061.
> [  326.5361ing queue 4 to ctrl 1061.
> [  326.556148] nvmet: adding queue 5 to ctrl 1061.
> [  326.556499] nvmet: adding queue 6 to ctrl 1061.
> [  326.556779] nvmet: adding queue 7 to ctrl 1061.
> [  326.557093] nvmet: adding queue 8 to ctrl 1061.
> [  326.576166] nvmet: adding queue 9 to ctrl 1061.
> [  326.576420] nvmet: adding queue 10 to ctrl 1061.
> [  326.576674] nvmet: adding queue 11 to ctrl 1061.
> [  326.576922] nvmet: adding queue 12 to ctrl 1061.
> [  326.577274] nvmet: adding queue 13 to ctrl 1061.
> [  326.577595] nvmet: adding queue 14 to ctrl 1061.
> [  326.596656] nvmet: adding queue 15 to ctrl 1061.
> [  326.596936] nvmet: adding queue 16 to ctrl 1061.
> [  326.662587] nvmet: creating controller 1062 for NQN nqn.2014-08.org.nvmexpress:NVMf:uuid:32413b2b-89cc-4939-b816-399ff293800d.
> [  326.686765] mlx4_core 0000:07:00.0: swiotlb buffer is full (sz: 532480 bytes)
> [  326.686766] swiotlb: coherent allocation failed for device 0000:07:00.0 size=532480
> [  326.686768] CPU: 6 PID: 3931 Comm: kworker/6:256 Not tainted 4.10.0 #2
> [  326.686768] Hardware name: HP ProLiant DL388p Gen8, BIOS P70 12/20/2013
> [  326.686775] Workqueue: ib_cm cm_work_handler [ib_cm]
> [  326.686776] Call Trace:
> [  326.686781]  dump_stack+0x63/0x87
> [  326.686783]herent+0x14a/0x160
> [  326.686786]  x86_swiotlb_alloc_coherent+0x43/0x50
> [  326.686795]  mlx4_buf_direct_alloc.isra.4+0xb1/0x150 [mlx4_core]
> [  326.686798]  mlx4_buf_alloc+0x172/0x1c0 [mlx4_core]
> [  326.686802]  create_qp_common.isra.33+0x633/0x1010 [mlx4_ib]
> [  326.686805]  ? mlx4_ib_create_qp+0xf7/0x450 [mlx4_ib]
> [  326.686807]  mlx4_ib_create_qp+0x149/0x450 [mlx4_ib]
> [  326.686816]  ib_create_qp+0x70/0x2b0 [ib_core]
> [  326.686819]  rdma_create_qp+0x34/0xa0 [rdma_cm]
> [  326.686823]  nvmet_rdma_alloc_queue+0x692/0x900 [nvmet_rdma]
> [  326.686824]  ? nvmet_rdma_execute_command+0x100/0x100 [nvmet_rdma]
> [  326.686826]  nvmet_rdma_cm_handler+0x1e6/0x708 [nvmet_rdma]
> [  326.686827]  ? cma_acquire_dev+0x1e7/0x4b0 [rdma_cm]
> [  326.686829]  ? cma_new_conn_id+0xb2/0x4b0 [rdma_cm]
> [  326.686830]  ? cma_new_conn_id+0x153/0x4b0 [rdma_cm]
> [  326.686832]  cma_req_handler+0x1f5/0x4c0 [rdma_cm]
> [  326.686834]  cm_process_work+0x25/0x120 [ib_cm]
> [  326.686835]  cm_req_handler+0x994/0xcd0 [ib_cm]
> [  326.686837]  cm_work_handler+0x1ce/0x1753 [ib_cm]
> [  326.686839]  process_one_work+0x165/0x410
> [  326.686840]  worker_thread+0x137/0x4c0
> [  326.686841]  kthread+0x101/0x140
> [  326.686842]  ? rescuer_thread+0x3b0/0x3b0
> [  326.686843]  ? kthread_park+0x90/0x90
> [  326.686845]  ret_from_fork+0x2c/0x40
> [  326.691158] mlx4_core 0000:07:00.0: swiotlb buffer is full (sz: 532480 bytes)
> [  326.691158] swiotlb: coherent allocevice 0000:07:00.0 size=532480
> [  326.691160] CPU: 6 PID: 3931 Comm: kworker/6:256 Not tainted 4.10.0 #2
> [  326.691160] Hardware name: HP ProLiant DL388p Gen8, BIOS P70 12/20/2013
> [  326.691163] Workqueue: ib_cm cm_work_handler [ib_cm]
> [  326.691163] Call Trace:
> [  326.691165]  dump_stack+0x63/0x87
> [  326.691167]  swiotlb_alloc_coherent+0x14a/0x160
> [  326.691168]  x86_swiotlb_alloc_coherent+0x43/0x50
> [  326.691173]  mlx4_buf_direct_alloc.isra.4+0xb1/0x150 [mlx4_core]
> [  326.691176]  mlx4_buf_alloc+0x172/0x1c0 [mlx4_core]
> [  326.691179]  create_qp_common.isra.33+0x633/0x1010 [mlx4_ib]
> [  326.691181]  mlx4_ib_create_qp+0x149/0x450 [mlx4_ib]
> [  326.691186]  ib_create_qp+0x70/0x2b0 [ib_core]
> [  326.691188]  rdma_create_qp+0x34/0xa0 [rdma_cm]
> [  326.691190]  nvmet_rdma_alloc_queue+0x692/0x900 [nvmet_rdma]
> [  326.691191]  ? nvmet_rdma_execute_command+0x100/0x100 [nvmet_rdma]
> [  326.691193]  nvmet_rdma_cm_handler+0x1e6/0x708 [nvmet_rdma]
> [  326.691194]  ? cma_acquire_dev+0x1e7/0x4b0 [rdma_cm]
> [  326.691196]  ? cma_new_conn_id+0xb2/0x4b0 [rdma_cm]
> [  326.691197]  ? cma_new_conn_id+0x153/0x4b0 [rdma_cm]
> [  326.691199]  cma_req_handler+0x1f5/0x4c0 [rdma_cm]
> [  326.691201]  cm_process_work+0x25/0x120 [ib_cm]
> [  326.691202]  cm_req_handler+0x994/0xcd0 [ib_cm]
> [  326.691204]  cm_work_handler+0x1ce/0x1753 [ib_cm]
> [  326.691205]  process_one_work+0x165/0x410
> [  326.691206]  worker_thread+0x137/0x4c0
> [  326.691207]  kthread+0x101/0x140
> [  326.691209]  ? rescuer_thread+0x3b0/0x3b0
> [  326.691209]  ? kthread_park+0x90/0x90
> [  326.691211]  ret_from_fork+0x2c/0x40
> [  326.695215] mlx4_core 0000:07:00.0: swiotlb buffer is full (sz: 532480 bytes)
> [  326.695216] swiotlb: coherent allocation failed for device 0000:07:00.0 size=532480
> [  326.695217] CPU: 6 PID: 3931 Comm: kworker/6:256 Not tainted 4.10.0 #2
> [  326.695217] Hardware name: HP ProLiant DL388p Gen8, BIOS P70 12/20/2013
> [  326.695219] Workqueue: ib_cm cm_work_handler [ib_cm]
> [  326.695220] Call Trace:
> [  326.695222]  dump_stack+0x63/0x87
> [  .695223]  swiotlb_alloc_coherent+0x14a/0x160
> [  326.695224]  x86_swiotlb_alloc_coherent+0x43/0x50
> [  326.695228]  mlx4_buf_direct_alloc.isra.4+0xb1/0x150 [mlx4_core]
> [  326.695232]  mlx4_buf_alloc+0x172/0x1c0 [mlx4_core]
> [  326.695234]  create_qp_common.isra.33+0x633/0x1010 [mlx4_ib]
> [  326.695237]  mlx4_ib_create_qp+0x149/0x450 [mlx4_ib]
> [  326.695241]  ib_create_qp+0x70/0x2b0 [ib_core]
> [  326.695243]  rdma_create_qp+0x34/0xa0 [rdma_cm]
> [  326.695245]  nvmet_rdma_alloc_queue+0x692/0x900 [nvmet_rdma]
> [  326.695246]  ? nvmet_rdma_execute_command+0x100/0x100 [nvmet_rdma]
> [  326.695247]  nvmet_rdma_cm_handler+0x1e6/0x708 [nvmet_rdma]
> [  326.695249]  ? cma_acquire_dev+0x1e7/0x4b0 [rdma_cm]
> [  326.695251]  ? cma_new_conn_id+0xb2/0x4b0 [rdma_cm]
> [  326.695252]  ? cma_new_conn_id+0x153/0x4b0 [rdma_cm]
> [  326.695254]  cma_req_handler+0x1f5/0x4c0 [rdma_cm]
> [  326.695256]  cm_process_work+0x25/0x120 [ib_cm]
> [  326.695257]  cm_req_handler+0x994/0xcd0 [ib_cm]
> [  326.695259]  cm_work_handler+0x1ce/0x1753 [ib_cm]
> [  326.695260]  process_one_work+0x165/0x410
> [  326.695261]  worker_thread+0x137/0x4c0
> [  326.695262]  kthread+0x101/0x140
> [  326.695263]  ? rescuer_thread+0x3b0/0x3b0
> [  326.695264]  ? kthread_park+0x90/0x90
> [  3t_from_fork+0x2c/0x40
>
> Initiator side log:
> [  532.880043] nvme nvme0: new ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery", addr 172.31.2.3:1023
> [  533.002002] nvme nvme0: creating 16 I/O queues.
> [  533.446540] nvme nvme0: new ctrl: NQN "nvme-subsystem-name", addr 172.31.2.3:1023
> [  691.641201] nvme nvme0: rdma_resolve_addr wait failed (-110).
> [  691.672089] nvme nvme0: failed to initialize i/o queue: -110
> [  691.721031] nvme nvme0: Removing after reset failure

+ Christoph and Sagi.

>
>
> Best Regards,
>   Yi Zhang
>
>
>
> _______________________________________________
> Linux-nvme mailing list
> Linux-nvme at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-nvme
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-nvme/attachments/20170305/9c64980d/attachment-0001.sig>

More information about the Linux-nvme mailing list