[PATCH] nvme: Acknowledge completion queue on each iteration

[Sinan Kaya]

On 7/19/2017 5:20 AM, Sagi Grimberg wrote:
>> Code is moving the completion queue doorbell after processing all completed
>> events and sending callbacks to the block layer on each iteration.
>>
>> This is causing a performance drop when a lot of jobs are queued towards
>> the HW. Move the completion queue doorbell on each loop instead and allow new
>> jobs to be queued by the HW.
>>
>> Signed-off-by: Sinan Kaya <okaya at codeaurora.org>
>> ---
>>   drivers/nvme/host/pci.c | 5 ++---
>>   1 file changed, 2 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
>> index d10d2f2..33d9b5b 100644
>> --- a/drivers/nvme/host/pci.c
>> +++ b/drivers/nvme/host/pci.c
>> @@ -810,13 +810,12 @@ static void nvme_process_cq(struct nvme_queue *nvmeq)
>>         while (nvme_read_cqe(nvmeq, &cqe)) {
>>           nvme_handle_cqe(nvmeq, &cqe);
>> +        nvme_ring_cq_doorbell(nvmeq);
>>           consumed++;
>>       }
>>   -    if (consumed) {
>> -        nvme_ring_cq_doorbell(nvmeq);
>> +    if (consumed)
>>           nvmeq->cqe_seen = 1;
>> -    }
>>   }
> 
> Agree with Keith that this is definitely not the way to go, it
> adds mmio operations in the hot path with very little gain (if
> at all).
> 

Understood, different architectures might have different latency accessing the HW
registers. It might be expansive on some platform like you indicated and this change
would make it worse.

I'm doing a self NACK as well.

-- 
Sinan Kaya
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.