[v5 04/14] mpt3sas: Added support for nvme encapsulated request message.
Suganath Prabu S
suganath-prabu.subramani at broadcom.com
Wed Aug 30 07:08:28 PDT 2017
* Mpt3sas driver uses the NVMe Encapsulated Request message to
send an NVMe command to an NVMe device attached to the IOC.
* Normal I/O commands like reads and writes are passed to the
controller as SCSI commands and the controller has the ability
to translate the commands to NVMe equivalent.
* This encapsulated NVMe command is used by applications to send
direct NVMe commands to NVMe drives or for handling unmap where
the translation at controller/firmware level is having
performance issues.
Signed-off-by: Chaitra P B <chaitra.basappa at broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani at broadcom.com>
Reviewed-by: Hannes Reinecke <hare at suse.com>
---
drivers/scsi/mpt3sas/mpt3sas_base.c | 56 +++++++++++++++++++++++++++++-
drivers/scsi/mpt3sas/mpt3sas_base.h | 1 +
drivers/scsi/mpt3sas/mpt3sas_ctl.c | 69 +++++++++++++++++++++++++++++++++----
3 files changed, 119 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index dcf5157..9653cfa 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -557,6 +557,11 @@ _base_sas_ioc_info(struct MPT3SAS_ADAPTER *ioc, MPI2DefaultReply_t *mpi_reply,
frame_sz = sizeof(Mpi2SmpPassthroughRequest_t) + ioc->sge_size;
func_str = "smp_passthru";
break;
+ case MPI2_FUNCTION_NVME_ENCAPSULATED:
+ frame_sz = sizeof(Mpi26NVMeEncapsulatedRequest_t) +
+ ioc->sge_size;
+ func_str = "nvme_encapsulated";
+ break;
default:
frame_sz = 32;
func_str = "unknown";
@@ -985,7 +990,9 @@ _base_interrupt(int irq, void *bus_id)
if (request_desript_type ==
MPI25_RPY_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO_SUCCESS ||
request_desript_type ==
- MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS) {
+ MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS ||
+ request_desript_type ==
+ MPI26_RPY_DESCRIPT_FLAGS_PCIE_ENCAPSULATED_SUCCESS) {
cb_idx = _base_get_cb_idx(ioc, smid);
if ((likely(cb_idx < MPT_MAX_CALLBACKS)) &&
(likely(mpt_callbacks[cb_idx] != NULL))) {
@@ -3046,6 +3053,30 @@ _base_put_smid_hi_priority(struct MPT3SAS_ADAPTER *ioc, u16 smid,
}
/**
+ * _base_put_smid_nvme_encap - send NVMe encapsulated request to
+ * firmware
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return nothing.
+ */
+static void
+_base_put_smid_nvme_encap(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ Mpi2RequestDescriptorUnion_t descriptor;
+ u64 *request = (u64 *)&descriptor;
+
+ descriptor.Default.RequestFlags =
+ MPI26_REQ_DESCRIPT_FLAGS_PCIE_ENCAPSULATED;
+ descriptor.Default.MSIxIndex = _base_get_msix_index(ioc);
+ descriptor.Default.SMID = cpu_to_le16(smid);
+ descriptor.Default.LMID = 0;
+ descriptor.Default.DescriptorTypeDependent = 0;
+ _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
+ &ioc->scsi_lookup_lock);
+}
+
+/**
* _base_put_smid_default - Default, primarily used for config pages
* @ioc: per adapter object
* @smid: system request message index
@@ -3136,6 +3167,27 @@ _base_put_smid_hi_priority_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid,
}
/**
+ * _base_put_smid_nvme_encap_atomic - send NVMe encapsulated request to
+ * firmware using Atomic Request Descriptor
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return nothing.
+ */
+static void
+_base_put_smid_nvme_encap_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ Mpi26AtomicRequestDescriptor_t descriptor;
+ u32 *request = (u32 *)&descriptor;
+
+ descriptor.RequestFlags = MPI26_REQ_DESCRIPT_FLAGS_PCIE_ENCAPSULATED;
+ descriptor.MSIxIndex = _base_get_msix_index(ioc);
+ descriptor.SMID = cpu_to_le16(smid);
+
+ writel(cpu_to_le32(*request), &ioc->chip->AtomicRequestDescriptorPost);
+}
+
+/**
* _base_put_smid_default - Default, primarily used for config pages
* use Atomic Request Descriptor
* @ioc: per adapter object
@@ -5968,11 +6020,13 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
ioc->put_smid_scsi_io = &_base_put_smid_scsi_io_atomic;
ioc->put_smid_fast_path = &_base_put_smid_fast_path_atomic;
ioc->put_smid_hi_priority = &_base_put_smid_hi_priority_atomic;
+ ioc->put_smid_nvme_encap = &_base_put_smid_nvme_encap_atomic;
} else {
ioc->put_smid_default = &_base_put_smid_default;
ioc->put_smid_scsi_io = &_base_put_smid_scsi_io;
ioc->put_smid_fast_path = &_base_put_smid_fast_path;
ioc->put_smid_hi_priority = &_base_put_smid_hi_priority;
+ ioc->put_smid_nvme_encap = &_base_put_smid_nvme_encap;
}
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 4caa91e..c4be9ad 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -1351,6 +1351,7 @@ struct MPT3SAS_ADAPTER {
PUT_SMID_IO_FP_HIP put_smid_fast_path;
PUT_SMID_IO_FP_HIP put_smid_hi_priority;
PUT_SMID_DEFAULT put_smid_default;
+ PUT_SMID_DEFAULT put_smid_nvme_encap;
};
diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
index 0c18831..6362d60 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
@@ -272,6 +272,7 @@ mpt3sas_ctl_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
{
MPI2DefaultReply_t *mpi_reply;
Mpi2SCSIIOReply_t *scsiio_reply;
+ Mpi26NVMeEncapsulatedErrorReply_t *nvme_error_reply;
const void *sense_data;
u32 sz;
@@ -298,6 +299,18 @@ mpt3sas_ctl_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
memcpy(ioc->ctl_cmds.sense, sense_data, sz);
}
}
+ /*
+ * Get Error Response data for NVMe device. The ctl_cmds.sense
+ * buffer is used to store the Error Response data.
+ */
+ if (mpi_reply->Function == MPI2_FUNCTION_NVME_ENCAPSULATED) {
+ nvme_error_reply =
+ (Mpi26NVMeEncapsulatedErrorReply_t *)mpi_reply;
+ sz = min_t(u32, NVME_ERROR_RESPONSE_SIZE,
+ le32_to_cpu(nvme_error_reply->ErrorResponseCount));
+ sense_data = mpt3sas_base_get_sense_buffer(ioc, smid);
+ memcpy(ioc->ctl_cmds.sense, sense_data, sz);
+ }
}
_ctl_display_some_debug(ioc, smid, "ctl_done", mpi_reply);
@@ -641,11 +654,12 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
{
MPI2RequestHeader_t *mpi_request = NULL, *request;
MPI2DefaultReply_t *mpi_reply;
+ Mpi26NVMeEncapsulatedRequest_t *nvme_encap_request = NULL;
u32 ioc_state;
u16 smid;
unsigned long timeout;
u8 issue_reset;
- u32 sz;
+ u32 sz, sz_arg;
void *psge;
void *data_out = NULL;
dma_addr_t data_out_dma = 0;
@@ -742,7 +756,8 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
mpi_request->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH ||
mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT ||
- mpi_request->Function == MPI2_FUNCTION_SATA_PASSTHROUGH) {
+ mpi_request->Function == MPI2_FUNCTION_SATA_PASSTHROUGH ||
+ mpi_request->Function == MPI2_FUNCTION_NVME_ENCAPSULATED) {
device_handle = le16_to_cpu(mpi_request->FunctionDependent1);
if (!device_handle || (device_handle >
@@ -793,6 +808,38 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
init_completion(&ioc->ctl_cmds.done);
switch (mpi_request->Function) {
+ case MPI2_FUNCTION_NVME_ENCAPSULATED:
+ {
+ nvme_encap_request = (Mpi26NVMeEncapsulatedRequest_t *)request;
+ /*
+ * Get the Physical Address of the sense buffer.
+ * Use Error Response buffer address field to hold the sense
+ * buffer address.
+ * Clear the internal sense buffer, which will potentially hold
+ * the Completion Queue Entry on return, or 0 if no Entry.
+ * Build the PRPs and set direction bits.
+ * Send the request.
+ */
+ nvme_encap_request->ErrorResponseBaseAddress = ioc->sense_dma &
+ 0xFFFFFFFF00000000;
+ nvme_encap_request->ErrorResponseBaseAddress |=
+ (U64)mpt3sas_base_get_sense_buffer_dma(ioc, smid);
+ nvme_encap_request->ErrorResponseAllocationLength =
+ NVME_ERROR_RESPONSE_SIZE;
+ memset(ioc->ctl_cmds.sense, 0, NVME_ERROR_RESPONSE_SIZE);
+ ioc->build_nvme_prp(ioc, smid, nvme_encap_request,
+ data_out_dma, data_out_sz, data_in_dma, data_in_sz);
+ if (test_bit(device_handle, ioc->device_remove_in_progress)) {
+ dtmprintk(ioc, pr_info(MPT3SAS_FMT "handle(0x%04x) :"
+ "ioctl failed due to device removal in progress\n",
+ ioc->name, device_handle));
+ mpt3sas_base_free_smid(ioc, smid);
+ ret = -EINVAL;
+ goto out;
+ }
+ ioc->put_smid_nvme_encap(ioc, smid);
+ break;
+ }
case MPI2_FUNCTION_SCSI_IO_REQUEST:
case MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH:
{
@@ -1008,15 +1055,25 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
}
}
- /* copy out sense to user */
+ /* copy out sense/NVMe Error Response to user */
if (karg.max_sense_bytes && (mpi_request->Function ==
MPI2_FUNCTION_SCSI_IO_REQUEST || mpi_request->Function ==
- MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) {
- sz = min_t(u32, karg.max_sense_bytes, SCSI_SENSE_BUFFERSIZE);
+ MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH || mpi_request->Function ==
+ MPI2_FUNCTION_NVME_ENCAPSULATED)) {
+ if (karg.sense_data_ptr == NULL) {
+ pr_info(MPT3SAS_FMT "Response buffer provided"
+ " by application is NULL; Response data will"
+ " not be returned.\n", ioc->name);
+ goto out;
+ }
+ sz_arg = (mpi_request->Function ==
+ MPI2_FUNCTION_NVME_ENCAPSULATED) ? NVME_ERROR_RESPONSE_SIZE :
+ SCSI_SENSE_BUFFERSIZE;
+ sz = min_t(u32, karg.max_sense_bytes, sz_arg);
if (copy_to_user(karg.sense_data_ptr, ioc->ctl_cmds.sense,
sz)) {
pr_err("failure at %s:%d/%s()!\n", __FILE__,
- __LINE__, __func__);
+ __LINE__, __func__);
ret = -ENODATA;
goto out;
}
--
2.5.5
More information about the Linux-nvme
mailing list