[PATCHv2] NVMe: Fix reset/remove race

[Keith Busch]

This fixes a scenario where device is present and being reset, but a
request to unbind the driver occurs.

A previous patch series addressing a device failure removal scenario
flushed reset_work after controller disable to unblock reset_work waiting
on a completion that wouldn't occur. This isn't safe as-is. The broken
scenario can potentially be induced with:

  modprobe nvme && modprobe -r nvme

To fix, the reset work is flushed immediately after setting the controller
removing flag, and any subsequent reset will not proceed with controller
initialization if the flag is set.

The controller status must be polled while active, so the watchdog timer
is also left active until the controller is disabled to cleanup requests
that may be stuck during namespace removal.

[Fixes: ff23a2a15a2117245b4599c1352343c8b8fb4c43]
Signed-off-by: Keith Busch <keith.busch at intel.com>
---
v1->v2:
  Removed the untested change on IO timeout handling that skipped queueing
  reset work.

 drivers/nvme/host/pci.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 24ccda3..660ec84 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -1859,6 +1859,9 @@ static void nvme_reset_work(struct work_struct *work)
 	if (dev->ctrl.ctrl_config & NVME_CC_ENABLE)
 		nvme_dev_disable(dev, false);
 
+	if (test_bit(NVME_CTRL_REMOVING, &dev->flags))
+		goto out;
+
 	set_bit(NVME_CTRL_RESETTING, &dev->flags);
 
 	result = nvme_pci_enable(dev);
@@ -2078,11 +2081,10 @@ static void nvme_remove(struct pci_dev *pdev)
 {
 	struct nvme_dev *dev = pci_get_drvdata(pdev);
 
-	del_timer_sync(&dev->watchdog_timer);
-
 	set_bit(NVME_CTRL_REMOVING, &dev->flags);
 	pci_set_drvdata(pdev, NULL);
 	flush_work(&dev->async_work);
+	flush_work(&dev->reset_work);
 	flush_work(&dev->scan_work);
 	nvme_remove_namespaces(&dev->ctrl);
 	nvme_uninit_ctrl(&dev->ctrl);
-- 
2.7.2