nvme-fabrics: crash at nvme connect-all
Marta Rybczynska
mrybczyn at kalray.eu
Fri Jun 10 02:03:43 PDT 2016
----- Le 9 Juin 16, à 17:48, Steve Wise swise at opengridcomputing.com a écrit :
>>
>>
>> Thanks Marta. That card has less memory than the T580-CR. I'm checking with
>> Chelsio on the details. The "-SO" might mean a mem-free card.
>>
>> Also, can you email me the output of 'cat
> /sys/kernel/debug/cxgb4/blah/meminfo'?
Here it is:
# cat /sys/kernel/debug/cxgb4/0000\:09\:00.4/meminfo
EDC0: 0x0-0x2fffff [3.00 MiB]
EDC1: 0x300000-0x5fffff [3.00 MiB]
RQUDP region: 0xffffffff-0xfffffffe [0 B]
DBQ contexts: 0x27fa80-0x28ba7f [48.0 KiB]
IMSG contexts: 0x28ba80-0x297a7f [48.0 KiB]
FLM cache: 0x297a80-0x2d9a7f [264 KiB]
ULPTX state: 0x2d9a80-0x2d9e3f [960 B]
ULPRX state: 0x2d9e40-0x2d9e7f [64.0 B]
Timers: 0x2d9e80-0x2e7e7f [56.0 KiB]
TCBs: 0x2e7e80-0x327fff [256 KiB]
Tx payload: 0x328000-0x3e7fff [768 KiB]
Rx payload: 0x3e8000-0x507fff [1.13 MiB]
Pstructs: 0x508000-0x50afff [12.0 KiB]
Rx FL: 0x50b000-0x50b0bf [192 B]
Tx FL: 0x50b0c0-0x50b13f [128 B]
Pstruct FL: 0x50b140-0x50b33f [512 B]
TDDP region: 0x50b340-0x537b3f [178 KiB]
iSCSI region: 0x537b40-0x557b3f [128 KiB]
TPT region: 0x557b40-0x56df3f [89.0 KiB]
STAG region: 0x557b40-0x56df3f [89.0 KiB]
TXPBL region: 0x56df40-0x5a593f [223 KiB]
PBL region: 0x56df40-0x5a593f [223 KiB]
RQ region: 0x5a5940-0x5f373f [312 KiB]
uP RAM: 0x0-0xffffffff [4.00 GiB]
uP Extmem2: 0x0-0xffffffff [4.00 GiB]
72 Rx pages of size 16KiB for 1 channels
48 Tx pages of size 16KiB for 2 channels
192 p-structs
Port 0 using 2 pages out of 432 allocated
Port 1 using 2 pages out of 432 allocated
Port 2 using 2 pages out of 432 allocated
Port 3 using 2 pages out of 432 allocated
Loopback 0 using 0 pages out of 144 allocated
Loopback 1 using 0 pages out of 144 allocated
Loopback 2 using 0 pages out of 144 allocated
Loopback 3 using 0 pages out of 144 allocated
Marta
More information about the Linux-nvme
mailing list