[PATCH] NVMe: Free admin queue memory on initialisation failure
willy at linux.intel.com
willy at linux.intel.com
Fri Aug 3 14:01:35 EDT 2012
From: Matthew Wilcox <matthew.r.wilcox at intel.com>
If the adapter fails initialisation, the memory allocated for the
admin queue may not be freed. Split the memory freeing part of
nvme_free_queue() into nvme_free_queue_mem() and call it in the case of
initialisation failure.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox at intel.com>
Reported-by: Vishal Verma <vishal.l.verma at intel.com>
---
drivers/block/nvme.c | 28 +++++++++++++++++++---------
1 file changed, 19 insertions(+), 9 deletions(-)
diff --git a/drivers/block/nvme.c b/drivers/block/nvme.c
index 3278fbd..2140370 100644
--- a/drivers/block/nvme.c
+++ b/drivers/block/nvme.c
@@ -868,6 +868,15 @@ static int nvme_set_features(struct nvme_dev *dev, unsigned fid,
return nvme_submit_admin_cmd(dev, &c, result);
}
+static void nvme_free_queue_mem(struct nvme_queue *nvmeq)
+{
+ dma_free_coherent(nvmeq->q_dmadev, CQ_SIZE(nvmeq->q_depth),
+ (void *)nvmeq->cqes, nvmeq->cq_dma_addr);
+ dma_free_coherent(nvmeq->q_dmadev, SQ_SIZE(nvmeq->q_depth),
+ nvmeq->sq_cmds, nvmeq->sq_dma_addr);
+ kfree(nvmeq);
+}
+
static void nvme_free_queue(struct nvme_dev *dev, int qid)
{
struct nvme_queue *nvmeq = dev->queues[qid];
@@ -882,11 +891,7 @@ static void nvme_free_queue(struct nvme_dev *dev, int qid)
adapter_delete_cq(dev, qid);
}
- dma_free_coherent(nvmeq->q_dmadev, CQ_SIZE(nvmeq->q_depth),
- (void *)nvmeq->cqes, nvmeq->cq_dma_addr);
- dma_free_coherent(nvmeq->q_dmadev, SQ_SIZE(nvmeq->q_depth),
- nvmeq->sq_cmds, nvmeq->sq_dma_addr);
- kfree(nvmeq);
+ nvme_free_queue_mem(nvmeq);
}
static struct nvme_queue *nvme_alloc_queue(struct nvme_dev *dev, int qid,
@@ -982,7 +987,7 @@ static __devinit struct nvme_queue *nvme_create_queue(struct nvme_dev *dev,
static int __devinit nvme_configure_admin_queue(struct nvme_dev *dev)
{
- int result;
+ int result = 0;
u32 aqa;
u64 cap;
unsigned long timeout;
@@ -1012,17 +1017,22 @@ static int __devinit nvme_configure_admin_queue(struct nvme_dev *dev)
timeout = ((NVME_CAP_TIMEOUT(cap) + 1) * HZ / 2) + jiffies;
dev->db_stride = NVME_CAP_STRIDE(cap);
- while (!(readl(&dev->bar->csts) & NVME_CSTS_RDY)) {
+ while (!result && !(readl(&dev->bar->csts) & NVME_CSTS_RDY)) {
msleep(100);
if (fatal_signal_pending(current))
- return -EINTR;
+ result = -EINTR;
if (time_after(jiffies, timeout)) {
dev_err(&dev->pci_dev->dev,
"Device not ready; aborting initialisation\n");
- return -ENODEV;
+ result = -ENODEV;
}
}
+ if (result) {
+ nvme_free_queue_mem(nvmeq);
+ return result;
+ }
+
result = queue_request_irq(dev, nvmeq, "nvme admin");
dev->queues[0] = nvmeq;
return result;
--
1.7.10.4
More information about the Linux-nvme
mailing list