[PATCH 2/3] mtd: spi-nor: support vcc-supply regulator

[Frank Li]

On Fri, Sep 20, 2024 at 04:54:07PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan at nxp.com>
>
> spi nor flash needs power supply to work properly. The power supply
> maybe software controllable per board design. So add the support
> for an optional vcc-supply regulator.
>
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> ---
>  drivers/mtd/spi-nor/core.c | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index 9d6e85bf227b..0449afe6bb20 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -17,6 +17,7 @@
>  #include <linux/mtd/spi-nor.h>
>  #include <linux/mutex.h>
>  #include <linux/of_platform.h>
> +#include <linux/regulator/consumer.h>
>  #include <linux/sched/task_stack.h>
>  #include <linux/sizes.h>
>  #include <linux/slab.h>
> @@ -3462,6 +3463,10 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
>  	if (!nor->bouncebuf)
>  		return -ENOMEM;
>
> +	ret = devm_regulator_get_enable_optional(dev, "vcc");
> +	if (ret)
> +		return ret;
> +

I think devm_regulator_get_enable_optional() should be called in
spi_nor_probe(). spi_nor_scan() is public API, which may call many time.
That will cause regulartor reference counter wrong.

Frank

>  	ret = spi_nor_hw_reset(nor);
>  	if (ret)
>  		return ret;
>
> --
> 2.37.1
>