[PATCH 0/3] spi-nor: add optional vcc-supply and enable it for i.MX93

[Peng Fan (OSS)]

spi-nor flash needs power supply to work properly, the power supply
could be software controlled. So need enable the power before using the
flash.

Patch 1,2 is to add vcc-supply for spi-nor
Patch 3 is to add overlays for i.MX93-11x11-EVK

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
Peng Fan (3):
      dt-bindings: mtd: jedec,spi-nor: add optional vcc-supply
      mtd: spi-nor: support vcc-supply regulator
      arm64: dts: imx93-11x11-evk: add overlays for flexspi flash

 .../devicetree/bindings/mtd/jedec,spi-nor.yaml     |  4 ++
 arch/arm64/boot/dts/freescale/Makefile             |  3 ++
 .../dts/freescale/imx93-11x11-evk-flexspi-m2.dtso  | 59 ++++++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts  | 10 ++++
 drivers/mtd/spi-nor/core.c                         |  5 ++
 5 files changed, 81 insertions(+)
---
base-commit: 3621a2c9142bd490af0666c0c02d52d60ce0d2a5
change-id: 20240920-spi-34231ea74761

Best regards,
-- 
Peng Fan <peng.fan at nxp.com>