[PATCH -next 11/11] mtd: spi-nor: Use helper function devm_clk_get_enabled()
Li Zetao
lizetao1 at huawei.com
Wed Aug 16 19:45:09 PDT 2023
After the commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for
prepared and enabled clocks"), it can replace the pair of functions,
devm_clk_get() and clk_prepare_enable() with a single helper function
devm_clk_get_enabled(). Moreover, the driver will keeps a clock prepared
(or enabled) during the whole lifetime of the driver, it is unnecessary to
unprepare and disable clock explicitly when remove driver or in the error
handling path.
Signed-off-by: Li Zetao <lizetao1 at huawei.com>
---
drivers/mtd/spi-nor/controllers/nxp-spifi.c | 33 ++++-----------------
1 file changed, 6 insertions(+), 27 deletions(-)
diff --git a/drivers/mtd/spi-nor/controllers/nxp-spifi.c b/drivers/mtd/spi-nor/controllers/nxp-spifi.c
index 337e83bf3362..5d8f47ab146f 100644
--- a/drivers/mtd/spi-nor/controllers/nxp-spifi.c
+++ b/drivers/mtd/spi-nor/controllers/nxp-spifi.c
@@ -394,30 +394,18 @@ static int nxp_spifi_probe(struct platform_device *pdev)
if (IS_ERR(spifi->flash_base))
return PTR_ERR(spifi->flash_base);
- spifi->clk_spifi = devm_clk_get(&pdev->dev, "spifi");
+ spifi->clk_spifi = devm_clk_get_enabled(&pdev->dev, "spifi");
if (IS_ERR(spifi->clk_spifi)) {
- dev_err(&pdev->dev, "spifi clock not found\n");
+ dev_err(&pdev->dev, "spifi clock not found or unable to enable\n");
return PTR_ERR(spifi->clk_spifi);
}
- spifi->clk_reg = devm_clk_get(&pdev->dev, "reg");
+ spifi->clk_reg = devm_clk_get_enabled(&pdev->dev, "reg");
if (IS_ERR(spifi->clk_reg)) {
- dev_err(&pdev->dev, "reg clock not found\n");
+ dev_err(&pdev->dev, "reg clock not found or unable to enable\n");
return PTR_ERR(spifi->clk_reg);
}
- ret = clk_prepare_enable(spifi->clk_reg);
- if (ret) {
- dev_err(&pdev->dev, "unable to enable reg clock\n");
- return ret;
- }
-
- ret = clk_prepare_enable(spifi->clk_spifi);
- if (ret) {
- dev_err(&pdev->dev, "unable to enable spifi clock\n");
- goto dis_clk_reg;
- }
-
spifi->dev = &pdev->dev;
platform_set_drvdata(pdev, spifi);
@@ -430,24 +418,17 @@ static int nxp_spifi_probe(struct platform_device *pdev)
flash_np = of_get_next_available_child(pdev->dev.of_node, NULL);
if (!flash_np) {
dev_err(&pdev->dev, "no SPI flash device to configure\n");
- ret = -ENODEV;
- goto dis_clks;
+ return -ENODEV;
}
ret = nxp_spifi_setup_flash(spifi, flash_np);
of_node_put(flash_np);
if (ret) {
dev_err(&pdev->dev, "unable to setup flash chip\n");
- goto dis_clks;
+ return ret;
}
return 0;
-
-dis_clks:
- clk_disable_unprepare(spifi->clk_spifi);
-dis_clk_reg:
- clk_disable_unprepare(spifi->clk_reg);
- return ret;
}
static int nxp_spifi_remove(struct platform_device *pdev)
@@ -455,8 +436,6 @@ static int nxp_spifi_remove(struct platform_device *pdev)
struct nxp_spifi *spifi = platform_get_drvdata(pdev);
mtd_device_unregister(&spifi->nor.mtd);
- clk_disable_unprepare(spifi->clk_spifi);
- clk_disable_unprepare(spifi->clk_reg);
return 0;
}
--
2.34.1
More information about the linux-mtd
mailing list