[PATCH 2/2] mtd: spinand: winbond: add Winbond W25N02KV flash support

mikhail.kshevetskiy at iopsys.eu mikhail.kshevetskiy at iopsys.eu
Fri Oct 7 03:40:58 PDT 2022


From: Mikhail Kshevetskiy <mikhail.kshevetskiy at iopsys.eu>

Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy at iopsys.eu>
---
 drivers/mtd/nand/spi/winbond.c | 75 ++++++++++++++++++++++++++++++++++
 1 file changed, 75 insertions(+)

diff --git a/drivers/mtd/nand/spi/winbond.c b/drivers/mtd/nand/spi/winbond.c
index ed368a55d68f..3ad58cd284d8 100644
--- a/drivers/mtd/nand/spi/winbond.c
+++ b/drivers/mtd/nand/spi/winbond.c
@@ -74,6 +74,72 @@ static int w25m02gv_select_target(struct spinand_device *spinand,
 	return spi_mem_exec_op(spinand->spimem, &op);
 }
 
+static int w25n02kv_ooblayout_ecc(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *region)
+{
+	if (section > 3)
+		return -ERANGE;
+
+	region->offset = 64 + (16 * section);
+	region->length = 13;
+
+	return 0;
+}
+
+static int w25n02kv_ooblayout_free(struct mtd_info *mtd, int section,
+				   struct mtd_oob_region *region)
+{
+	if (section > 3)
+		return -ERANGE;
+
+	region->offset = (16 * section) + 2;
+	region->length = 14;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops w25n02kv_ooblayout = {
+	.ecc = w25n02kv_ooblayout_ecc,
+	.free = w25n02kv_ooblayout_free,
+};
+
+static int w25n02kv_ecc_get_status(struct spinand_device *spinand,
+				   u8 status)
+{
+	struct nand_device *nand = spinand_to_nand(spinand);
+	u8 mbf = 0;
+	struct spi_mem_op op = SPINAND_GET_FEATURE_OP(0x30, &mbf);
+
+	switch (status & STATUS_ECC_MASK) {
+	case STATUS_ECC_NO_BITFLIPS:
+		return 0;
+
+	case STATUS_ECC_UNCOR_ERROR:
+		return -EBADMSG;
+
+	case STATUS_ECC_HAS_BITFLIPS:
+		/*
+		 * Let's try to retrieve the real maximum number of bitflips
+		 * in order to avoid forcing the wear-leveling layer to move
+		 * data around if it's not necessary.
+		 */
+		if (spi_mem_exec_op(spinand->spimem, &op))
+			return nanddev_get_ecc_conf(nand)->strength;
+
+		mbf >>= 4;
+
+		if (WARN_ON(mbf > nanddev_get_ecc_conf(nand)->strength || !mbf))
+			return nanddev_get_ecc_conf(nand)->strength;
+
+		return mbf;
+
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
 static const struct spinand_info winbond_spinand_table[] = {
 	SPINAND_INFO("W25M02GV",
 		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xab, 0x21),
@@ -94,6 +160,15 @@ static const struct spinand_info winbond_spinand_table[] = {
 					      &update_cache_variants),
 		     0,
 		     SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL)),
+	SPINAND_INFO("W25N02KV",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xaa, 0x22),
+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&w25n02kv_ooblayout, w25n02kv_ecc_get_status)),
 };
 
 static int winbond_spinand_init(struct spinand_device *spinand)
-- 
2.35.1




More information about the linux-mtd mailing list